Hello,
My name is Matthew. I've been vaping on and off for the last seven years and smoking for twenty-five years. My latest set-up is an Innokin Sceptre and a Smok Nord 2, both with subohm coils. I use Pink Spot Vapors' E-juice - right nowy flavors are USA Blend (tobacco), Bing Cherry, and Strawburst.

I really look forward to talking with others here.

Hi. Have had no problems with the regular caliburn system. Just got the G model and have had it stop working. I had it in my pocket with the regular model and I think it kept firing. Figured I ruined the coil so I put in new one. Took awhile but it started to work again. Then it stopped again. Then it started working again. Is item defective or could it be the coil! Thinking I’m over my head using the coils. But why would I have no problems with the coils in the regular caliburn.
Thanks for any help!!!!
Sheila

Hey guys. Have you used the Wenax series of devices by Geekvape? This time let's look at the Wenax K1 Kit which is the latest addition to the Wenax line. Here we go!

Geekvape Wenax K1 is a new pod system in pen style for users of all experience levels. Its chassis is made of anodized aluminum, making it extremely light and at the same time very durable. Powered by a 600mAh internal battery, the Wenax K1 can fire from 9-16W and lasts all day without charging. Charging is done via a USB-C port at a maximum charging rate of 1A. At the bottom of the device is a fire button with a logo. To fire the device you can either use the button or just take a puff. Output wise, the Wenax K1 supports smart output that can automatically detect the connected coil and select the best power output option.

As for the Wenax K1 cartridges, they are available in two versions with built-in coils of different resistances. Both can hold up to 2ml of e-liquid and are refilled via a side filling port. And, you can check the juice level hands down thanks to the transparent design of the cartridges. With purchase from vapesourcing online vape shop, you will get a 0.8ohm cartridge and a 1.2ohm cartridge, you can choose between them according to your preferred airflow and steam performance. With super simple operation, small size, incredible tight draw, the Wenax K1 Kit will be a top-notch little unit in the marketplace!

Like it? Learn more here: Geekvape Wenax K1 Pod System Kit 600mAh 16W

You may also like:
cigpet capo price
wotofo profile rdta review

The LIO RooT AIO Pod kit is a one-time all-in-one device. Unlike other Pod system devices, LIO RooT supports recharge and recharge. We recommend that you re-use LIO RooT 3 times before processing.

Parameters
Size: Ø18mm×93mm
Battery Capacity: 700mAh (16350)
Output Mode: 3.5V/12.5W
Material: Aluminum Alloy, PCTG
Resistance: 1.0ohm
E-liquid Capacity: 3ml
Puffs: 3500 puffs
Type: Rechargeable & Refillable for 3 times

The LIO RooT disposable kit is powered by a built-in 700mA battery and a Micro-USB charging port, and has a 3ml juice capacity. Vapers can be filled with juice as needed.

The LIO RooT Pod is transparent, so users can easily check the electronic liquid level. Each LIO RooT kit supports 3,500 vape.

Other kit we recommended:
ijoy lio bee 18 max cost
ijoy lio bee lit cost

The SMOK G-Priv 3 best vape kit uk is the latest rendition to the very popular G-PRIV series. It must be the one you are waiting for.Next, let's introduce it in detail.

G-PRIV 3 is the latest stylish box mod of G-PRIV series, with an all-round upgrade in both software and hardware. It
includes a modern box mod that is powered by a new IQ-G chipset, which can deliver up to 230 watts of power. Its 2.4 inch large touch screen is highly responsive, and you can get the information you need with a simple click. The mod with a newly designed TFV16 Lite Tank paired with two new mesh coils: Conical Mesh Coil powered by nexMes Technology and Dual Mesh Coil. Try this new version and continue to enjoy the pleasant vaping brought by G-PRIV series. Innovation keeps changing the vaping experience from vapesourcing.uk!

Parameters
Smok G-PRIV 3 Mod
Size: 54 * 28 * 85mm
Weight: 188g
Chip: IQ-G Chipset
Working Modes: VW ( Soft, Norm, Hard, Max ) / TC ( NI, TI, SS, TCR, Preheat ) / My Mode
Power Range: 1W-230W (VW) / 10-230W (TC)
Input Voltage: 6.4V-8.4V
Output Voltage: 0.5V-8.2V
Battery: two 18650 cells
Firing Time: 0.001s
Charging Port: Type-C
Charging Voltage: 5V
Charging Current: 2.0A
Standby Current: <400uA
Resistance Range: 0.1ohm-2.5ohm (VW) / 0.05ohm-2.0ohm (TC)
Temperature Range: 200°F-600°F / 100C-315°C
Screen: 2.4 Inch Touch Screen

Quick Link: Smok G-Priv 3 Kit 230W with TFV16 Lite Tank

This promotion is only for Retail customers, please click here for Wholesale offers!

Dear valued customers,

The traditional Chinese Spring Festival is just around the corner. To celebrate the upcoming CNY, Healthcabin Pre-Holiday Sale with 5 vape deals is ready. Come join us and save more on your favorite vape devices!!

A. Sign in to get 30% OFF

• Old customers – Please sign in directly to get your member VIP price, which is about 30% cheaper than regular price (the price before login).
• New customers – Please create a new account to get the same member VIP price.

Note: For all E-liquid products & DOVPO products, the member VIP price is the same with regular price, but we are offering better discounts, let’s chck it out.


B. 15% OFF Everything
Extra 15% OFF discount coupon code is available for your whole order. Take the chance!

• Coupon code: PRECNY
• Date: 23rd – 31st Jan, 2021 (-0600 GMT)
• $1 Flash Sale products excluded

C. VOOPOO 20% OFF
Further more, our 20% OFF coupon code for VOOPOO products is still available.

• Coupon code: VOOPOO20
• Date: 3rd – 30th Jan, 2021 (-0600 GMT)

D. Giveaway – Free New Vapes
We are now givingaway Voopoo brand new Drag 3 and Drag X Plus with 5 winners in total. If you don’t want to buy right now, why not try your luck and win free vapes? Click here to join and win!

E. Vape Deal Links
Here are some other useful links where you can find our best deals:

• Weekly Sale – Best price for new hot vapes with 17% OFF Coupon: WSHC
• $1 Flash Sale – Ultimate cheap vapes
• Clearance – Extremely cheap vapes!

F. Holiday Notice
Healthcabin team will be on 8-day long holiday from 10th to 17th Feb, 2021 and get back to work on 18th Feb. For more holiday notes and shipping arrangement, please click here.

The Smok IPX80 is another rendition of Smok RPM Pod Mods that features IP67 rated waterproof, dustproof, and shockproof. Most importantly, it also has a dual airflow adjustment mechanism on both sides separately, which learns from Smok Nord 4, to offer flexible e-juice atomizations.


Don't forget to use Coupon (PD12) to get an extra 12% off at the checkout!

Click here to check them out: Smok IPX80 80w Pod Mod Kit

We're looking for Vape Wholesale partners eagerly. Join us here: Vape Wholesale Supply, Vape Wholesale China - AVE40

Welcome you, vendors, to view our catalog online and navigate through the process for Vape Wholesale, set up your wholesale account, or drop us an email at info@ave40.com first

Login to view embedded media

The Vapx Meteor 510 has an optional dock accessory to achieve a 45w super-charging function. And of course, the mod is outfitted with a USB-C port at the foot to let users fuel up the battery alternatively!


Don't forget to use Coupon (PD12) to get an extra 12% off at the checkout!

Click here to check them out: Vapx Meteor 510 80w TC Box Mod

We're looking for Vape Wholesale partners eagerly. Join us here: Vape Wholesale Supply, Vape Wholesale China - AVE40

Welcome you, vendors, to view our catalog online and navigate through the process for Vape Wholesale, set up your wholesale account, or drop us an email at info@ave40.com first

Fucig Exvape Expromizer V5 MTL RTA is the fifth generation of the MTL Rebuildable Tank Atomizer designed in Germany, constructed from Stainless Steel (Body), Glass (Tank Tube) and POM (Drip Tip). It holds 2.0ml e-juice capacity with side top filling system and top-to-bottom airflow in 23mm diameter. Its airflow control can be adjusted in two different ways: on one side of the airflow control are 6 openings that you can open and close in steps, on the other side is a large opening, which you can adjust it as you need. The leakage will be completely prevented with the top-to-bottom airflow method. Liquid control will offer a wide range to control the liquid-flow, which makes Expromizer V5 RTA suitable for any types of liquid. Featuring single coil winding deck, it is easy to wind and handle.

Features
Brand: Fucig Exvape
Model: Expromizer V5
Material: Stainless Steel (Body) + Pyrex Glass (Tank Tube) + POM (Drip Tip))
Capacity: 2.0ml
510 threading connection
Designed in Germany
Children protection top screw design
Slide top filling design
Single coil winding deck, easy winding and handling
Adjustable top airflow system
Top-to-bottom airflow, Leakproof
Tank shield, protecting the glass tank from breaking easily

More details about this MTL RTA, please check >> https://www.3fvape.com/48148-fucig-exvape-expromizer-v5-mtl-rta.html

Both VOOPOO Drag S and VOOPOO Drag X are VoopPoo's most popular Mod Pod Kit. VOOPOO Drag S has a built-in 2500mAh battery, a maximum output of 60W, a juice capacity of 4.5ml, and is compatible with PnP series coils, and has seven colors to choose from Classics, Carbon Fiber, Retro, Mashup, Chestnut, Marsala, Galaxy Blue .



VOOPOO Drag S is a very compact and sturdy Mod Pod Kit, its overall size is only 87 * 33 * 28 mm. It is made of zinc alloy and leather materials, among which zinc alloy has strong toughness and is very durable. The leather has a good touch and is very comfortable to hold in the hand. Its smaller size is also very suitable to carry around. You can put it in your pocket and carry it with you when you are out for work and travel, so you can vaping at any time.

VOOPOO Drag S is equipped with a new generation of GENE.TT chipset. The new generation GENE.TT chip is able to explode Drag S into a powerful performance with extremely fast fire time. In addition, VOOPOO Drag S also has a built-in 2500mAh battery and can provide a maximum output power of 60W. The large battery capacity of VOOPOO Drag S also means longer battery life. It can meet our vaping needs throughout the day.

VOOPOO Drag S can be used with the new generation of VooPoo PnP Pod. The Pod has a juice capacity of 4.5ml and an innovative airflow system. Can bring us a lot of clouds and great flavor. The Pod also uses an easy-to-operate underfill system, which is very convenient to use. Two PnP coils are sold together with this Pod. Their resistance values are 0.2ohm and 0.3ohm respectively. Both coils are very suitable for DL. The best power of 0.2ohm PnP-VM5 coil is 40W-60W. The best power of 0.3ohm PnP-VM1 coil is 60W-80W.

VOOPOO DRAG S 60W Pod Mod Kit Features:

Integrated 2500mAh Rechargeable Battery
Wattage Output Range: 5-60W
Voltage Output Range: 3.2-4.2V
Resistance Range: 0.1-3.0ohm
Firing Speed: 0.001s
Intelligent Coil Identification
Zinc-Alloy and Leather Construction
Intuitive Firing Button
Two Adjustment Buttons
Magnetic Pod Connection
4.5mL PnP Pod Tank Capacity
Bottom Fill System
Bottom Press Fit Coil Installation
USB Type-C Port

Quick link: VOOPOO Drag S Mod Pod Kit 60W 2500mAh

Expromizer V5 RTA is the fifth generation of the MTL Rebuildable Tank Atomizer designed in Germany. It is a fusion of the previous versions (V3 and V4) and the liquid control and the top airflow were taken over from the V4 and improved. Expromizer V5 RTA is more compact with the same 2ml tank capacity. It features top filling method to make the refilling even easier and the top cap can be opened by simply sliding. There are two ways of airflow control: on one side of the airflow control are 6 openings that you can open and close in steps, on the other side is a large opening and you can adjust steplessly. The leakage will be completely prevented with the top-to-bottom airflow method. Liquid control will offer a wide range to control the liquid-flow, which makes Expromizer V5 RTA suitable for any types of liquid. Featuring single coil winding deck, it is easy to wind and handle.

Details:

1. Designed in Germany
2. Single coil deck
3. Slide-top filling cap
4. Pyrex glass tank with tank shield
5. Liquid control
6. Two ways of airflow control
7. Adjustable 510 pin screw
8. A fusion of the V3 and V4
9. Top filling method
10. Can be used with any types of liquid

Black derlin Gap mods cycloid with blue doors and button. Spare red silicone bottle. Red door/button kit and purple door/button kit.
Over $300 value.
Asking $150 shipped shipped

Sent from my LGL722DL using Tapatalk

Nearing the Chinese Spring Festival, Vapeciga provides our ultimate vape clearance before the holiday. Lowest prices only cost $1 !!! Limited Quantities. Big vape sale including ULTRONER aether squonk Mod only $50.99, Vaporesso Luxe S TC Kit only $34.99, Vandy Vape Swell Box Mod only $31.99, and more choices with great box mod kits, accessories, tank, e-liquid, and vape pod. Come to select our cheapest vape gears ever.

Quick Link: Ultimate Vape Clearance

Hi ECF members, In this review i take a look at the SWAG PX80 80W Pod Mod Kit with SWAG Pod Tank from Vaporesso. The SWAG PX80 80W Pod Mod Kit was supplied for the purpose of this review by Jasmine from Vaporesso.

Vaporesso » SWAG PX80



Introduction

Vaporesso are the flagship of the worlds largest e-cigarette manufacturer Smoore! Vaporesso's products just seem to get better and better and they don't shy away from being innovative as we have seen with features such as Super player, Smart TC and Pulse modes. In recent times they moved from using their Omni chipset (most manufacturers would love this chipset) to the Axon which really rocks offering even more stability and efficiency!

The Swag PX80 is a pod mod version of the much loved Swag series and it certainly has a few tricks under it's sleeve with an embedded IML screen and a neat way to allow changing coil heads while the pod still has e-liquid in it!

The Swag Pod Tank is the most innovative Pod tank i have used and is a great partner for the Axon powered Swag PX80 with it's Variable Wattage, Smart Wattage and Variable Voltage modes. The PX80 also has a puff monitoring system, customisable colour display and accommodates the much praised GTX coil heads which offer cross compatibility, let's check this latest gem from Vaporesso out!

___________________________________________________________________



In The Box



Contents:

1pc SWAG PX80 MOD
1pc SWAG POD (4ml / 2ml TPD)
1pc GTX 0.2ohm MESH Coil
1pc GTX 0.3ohm MESH Coil
1pc Type-C USB Cable
1pc User Manual
1pc Warranty Card
1pc Reminder Card



___________________________________________________________________



Aesthetics and Ergonomics



The Swag PX80 came in the usual cardboard packaging and on opening despite being a Pod Mod i received undoubtedly a Swag!!!! The option i received was the Emerald Green, the choices are Brick Black, Imperial Red, Emerald Green, Leather Brown or Gunmetal Grey.

The device as mentioned stays true to the Swag form factor with pretty much identical dimensions so is a pod mod that is very portable and ergonomic getting swallowed up in the hand. The device features both a nicely machined chromed fire button and navigational vertical rocker and has an hidden screen within an IML Carbon Fiber design one side. The opposite side see's a cut cornered Leather panel which makes a change to the usual leather spine and up top we have the most standard "tank looking" Pod i have seen to date.

As well as the buttons on the face we have a Type C USB port and then moving to the base we have printed safety stamps and venting. The device is extremely well made and in my opinion aesthetically pleasing to the eye!



___________________________________________________________________



SWAG PX80 Specs and Features:

Dimensions: 99.7 * 27.2 * 50.9mm
Materials: Zinc Alloy, Leather, IML panel, PCTG
POD Capacity: 4ml (Standard) / 2ml (TPD)
Coil: GTX 0.2ohm MESH Coil (45-60W), GTX 0.3ohm MESH Coil (32-45W)
Output Wattage: 5-80W
Battery: External 18650
Display: 0.96 inch TFT Screen
Charging: Type-C, 5V/2A
Embedded IML Screen
Replaceable Coil Without Emptying POD
Quad Leakage Protection
Adjustable Rotating Airflow
GTX Platform
AXON Chip
Magnetic Pod Connection
Colours: Brick Black, Imperial Red, Emerald Green, Leather Brown, Gunmetal Grey



___________________________________________________________________



The Pod

The Swag Tank Pod is the most sophisticated and "Tank like" pod i have used to date. Up top we have a Delrin proprietary drip tip which can't be removed but this is necessary as will become clear. The base of the drip tip has a chromed band and the fixed top-cap is Zinc alloy with both a printed closed and open padlock icon on it. The base section of the Pod Tank is also some kind of metal and incorporates dual airflow slots. We have a cylindrical opening and inner metallic chamber with wicking ports. The coil head just gets press fitted into place and sits flush with the base of the pod creating a flat sealed bottom surface to the pod and enclosed airflow.

The pod with coil head inserted has Vaporesso's Quad Leakage Protection which consists of triple O-ring seals and a self circulation system which recycles any escaping e-liquid rather than it coming out of the airflow slots.

The standard pod capacity is 4ml and the TPD version of course comes with a 2ml capacity Pod Tank. As with so many of these pods we have bottom fill in the form of a removable silicone plug which while it offers a quick and mess free experience i would much prefer top fill so i didn't need to remove the pod tank to fill!



___________________________________________________________________



The Coil Heads

The Swag PX80 Pod Tank accommodates the GTX platform series so we have cross compatibility with many recent Vaporesso products. Although the Swag Pod Tank has a clever way of ejecting coils which also allows coil changes while e-liquid is still in the tank when it comes to fitting a new coil just press fit into place and i will explain the rest in the next section.



You receive both a 0.2ohm and 0.3ohm mesh coil head with the 0.2ohm being rated between 45 and 60w and the 0.3ohm between 32 and 45w. Because we get cross compatibility with he GTX coil heads this gives many more options including a 1.2ohm MTL option!



___________________________________________________________________



Clean and Easy Coil Replacement

I have seen similar designs to this but not sure using the drip-tip as a coil ejecting tool and certainly not with any other pod/AIO tank.
The coil head fits inside the chamber but we also have an inner metal lining which acts as a shutter for the wicking ports when the coil is removed so the coil can be removed with e-liquid still inside the tank.

The drip tip has a little arrowhead and on the top-cap we have both an open and closed padlock. When the arrowhead is lined up with the closed padlock the drip-tip is locked in position but if you turn it to the open position (arrowhead lined up with open padlock) the drip tip can be pushed downwards which can be seen by the Chromed band around it's base lowering into the tank. when you press the drip tip down it pushes the inner metal lining down onto the coil which ejects while falling in place to act as a shutter for the wicking ports.

This way of ejecting the coil as allowed for the base of the coil to sit flush completing the flat sealed base of the pod giving both a leak resistant solution and enclosed airflow system! When fitting a coil as already mentioned you just press fit into place as normal which automatically pushes the inner lining up to expose the wicking ports but you need to remember to turn the drip tip to the closed position so if the drip tip gets pressed you don't eject the coil head by accident.



___________________________________________________________________



Fitting The Pod

Looking into the shallow pod bay we can see the central Gold plated, spring loaded contacts and four strong magnets to attract the metallic base of the pod. The pod fits very securely needing a strong tug to remove while still being able to turn with a smooth restriction for adjusting airflow!



___________________________________________________________________



The Airflow

The device has a slot towards the top either side which lines up with slots on the pod when inserted. Due to the base of the coil head completing a flat bottom to the pod the airflow is enclosed which is much better than on similar pod mod designs and having the side of the pod adjusting directly to the outer slot you don't get the air leakage as you do on fancy designs such as the Voopoo Drag X etc! excellently executed adjustable airflow design!!!!!!!!



___________________________________________________________________



Installing The Battery

The Swags have that Pico style top battery cap design which allows the battery to protrude above the height of the main body allowing for a smaller device. The cap on the Swag PX80 is substantial with heavy machined knurling, we have no brightly marked negative orientation but plenty of light gets into the tube and positive is vibrantly marked at the bottom of the tube so i am fine with this. Both unscrewing for battery installation and screwing the cap secure reveals nice smooth threading, good job!



___________________________________________________________________



The Display

The Swag PX80 has an integrated, embedded IML screen with outer Carbon Fiber effect layer before the final clear outer shell, this means the screen is invisible with just the Carbon fiber layer visible until the display springs into life, i love this!

Top left we have the battery status bar and top right the mode, below in large font we have either the wattage or Voltage depending which mode you are using! We then have a graphic equalizer which i don't believe really equates to anything as it would mean far from a smooth vape according to it but purely an aesthetic touch! Underneath the Graphic equalizer we have the suitable wattage range for the attached coil head for reference.

Below to the left we have the resistance and to the right the the voltage (displays wattage when in Variable Voltage mode). Finally at the bottom of the display we have the puff count to the left and vape duration to the bottom right. After 20 seconds of inactivity the display goes off and the screen disappears!!!!!!




Now you see me, now you don't!!!!!

___________________________________________________________________



Operating The Device

The Swag PX80 is the almost universal 5 clicks of the fire button within 2 seconds to power up or down and once on 3 quick clicks will lock the navigational rocker but the device will still fire!

+ and - together so just evenly depress the entire rocker enters the menu which displays a column of icons which can be scrolled through using the rocker with fire as select. We have Variable Wattage (default), Variable Voltage, Smart Wattage, Puff, Theme, Default and Exit.



When choosing Smart Wattage it gives an option to switch on or exit which will leave the device in the default standard Variable Wattage mode. When choosing Puff it reveals a 7 day monitoring graph, you also get the option to reset or exit without resetting. Theme allows you to change the colour of a few items like the graphic equalizer etc, the choices are Green, Blue or Pink!

The wattage adjusts in 0.5w increments with individual presses or 1w increments when the + or - is held down. It adjusts from 5 to 80w and doesn't round robin which is a rare con for this device especially with it being 80w. Maybe a 40w device not being able to round robin really doesn't matter but once you start getting to 80w it becomes a con but it's a sign how good i have found this device that i am emphasising what many will see as a petty con!



___________________________________________________________________



Protections:

Short Circuit Protection
No Load Protection
PCBA Overheat Protection
Auto Shut-off Protection
Over Charge Protection
Over Discharge Protection
Over Voltage Protection
Low Voltage Protection



___________________________________________________________________



Charging

If you find you need to charge your battery in the device then i am pleased that the Swag PX80 has both a Type C USB and 2A charge rate. While charging the screen displays a charging progress bar, the charge as a percentage and also estimated charge time left, it also supports pass-through, excellent!



___________________________________________________________________



False Battery Status Reading

I did find an issue with my device which might be isolated to my device or could need a firmware upgrade to solve. I initially put what i thought was a fresh battery in the device yet it showed just one Red battery bar but nether the less i decided to get what puffs i can before it reached the cut-off. Anyway about 300 puffs later it finally ran out of battery so it had been a full battery and it just displayed the wrong battery life percentage. The next battery i put in registered and behaved correctly throughout and when i fitted a third battery again it gave a full battery bar so all good! Then after about 70 to 80 puffs it jumped from all but one battery bars full to again just one Red bar! I attached the USB as the charge on the battery is displayed on the screen to find it still had 70% charge which sounded right and when pulling the USB out the status bar had gone back to displaying the correct status!

It's just the status bar can from time to time give a false reading, it doesn't actually effect battery life because if the status bar is showing you are out of battery it carries on firing until the battery actually does really reach cut-off. I would find it a deal breaker if sometimes it showed there was more charge on the battery than there actually was as this could leave you without a vape if you thought the device when leaving the house had plenty of charge to then find it had very little, instead it's just an annoyance when it displays incorrectly!!!!

___________________________________________________________________



How It Performs? And Thoughts!

What a gem this is from Vaporesso and so glad it uses the GTX coil platform as these are tried and tested coil heads which give really good flavour and decent longevity as well as cross compatibility.

Apart from the battery indication bar sometimes displaying a lower reading than is the actual status (could just be my device) which is more just annoying than anything else because it doesn't actually effect battery life it really is hard to find anything to complain about.

Maybe one thing worth mentioning is i believe they have missed a trick with this being a semi restrictive/restrictive direct lung device which even when using the 1.2ohm MTL coil (not included) only gives a loose MTL at best. I say that because the general thought would be those that love the Swag are likely candidates to consider buying this and sure some single coil RDL vapers etc use the Swag but the vast majority of Swag users i know have MTL set-ups. So in my opinion it seems a bit odd that the PX80 not just with the included coils but also slot airflow and wide bore proprietary drip-tip isn't considering MTL as an option. I really think Vaporesso should bring out a MTL version of the Swag Pod Tank which operates the same but has a series of holes each side for airflow and a drip tip more suited to a MTL vape!

I have always preferred the 0.3ohm coil head over the 0.2ohm as much because it allows a lower wattage vape as the flavour and draw is very similar. I do however for my own preference find the ratings a little high and prefer the 0.3ohm at 30w and the 0.2ohm at 40w, the airflow is very smooth across the board. Also the 0.6ohm and 0.8ohm mesh coil heads in the GTX series will give a lower wattage RDL vape increasing battery life while maintaining vape quality and flavour.

So much to like here from the clever way the drip tip ejects the coil and the inner lining of the chamber blocking the wicking ports to give a mess free coil change experience to just how well the adjustable airflow works with a smooth adjustment. The embedded screen i believe will appeal to many and i for one love it and although many Axon features are disabled this is still a feature rich device compared to other pod mods. The threading on the battery cap is the smoothest i have come across yet with a battery cap of this kind and the overall build quality and aesthetic look is first class! The device is also quite light, very portable and ergonomic making it a great out and about companion and that leak resistant Quad protection gives a leak free experience which is always a winner!

I have not always found Vaporesso devices the most efficient when it comes to battery life but despite my issues with the status bar the Swag PX80 is proving to buck that trend as i have been experiencing better battery life than average for a single 18650 device. I love both the chromed fire and navigational rocker as an aesthetic feature when the light catches and in it's operational capacity the fire button is nice and clicky and we get absolutely no delay, hitting set wattage out the gate!

For those that charge in the device we have both USB C and a 2A charge rate with great feedback given while charging including estimated charge time left, it also supports pass-through!



___________________________________________________________________



Likes

Excellent build quality
Portable and ergonomic
Very pleasing to the eye (subjective)
5 Leather panel options
Embedded Display within IML panel
User friendly interface
Space saving top battery cap design
Threading silky smooth
Swap coils while e-liquid still in Pod Tank
Neat system to eject coil heads
4ml Capacity (2ml TPD)
Can see e-liquid level at all times
Mess free filling
Leak resistant Quad protection
Accommodates GTX coil head series
Cross compatibility
Both coil heads included very good flavour and decent longevity
Fires out the gate with instant ramp up
Adjustable airflow moves smoothly and works great
Variable Wattage, Smart Wattage, Variable Voltage modes
7 day puff monitoring system
Screen accents colour customisation
Experienced above average battery life compared with other single 18650 devices
Type C USB / 2A charge rate
Excellent charging feedback including estimated charge time left
Supports firmware upgrades and pass-through


Cons

Status bar sometimes shows false reading (could be my device and not a general issue)
Not suited for MTL despite an available MTL coil head and the Swag being a MTL favourite
Bottom-fill, would much prefer top-fill
Wattage & Voltage adjustment doesn't round robin

I would once again like to thank Jasmine from Vaporesso for supplying the Swag PX80 80W Pod Mod Kit for the purpose of this review, thanks for reading and stay safe!

Vaporesso » SWAG PX80

___________________________________________________________________

The Wotofo Profile M RTA is the next iteration of the Profile Mesh-based deck, this time in a very small (REALLY small) tank form factor.

═╣ Wotofo Profile M RTA ╠═

00:00 ◄ Intro and specs
01:34 ◄ Close up and build
10:29 ◄ Vape
12:00 ◄ Thoughts


Login to view embedded media

Use code Your20 for 20% off all ejuices including juices already on sale!
Shop ejuice.deals

Miso Pod By Univapo
Founded in 2014, UNIVAPO Technology co., LTD is a technology research company specializing in the production, development, sale and service of electronic cigarettes.
In recent years, UNIVAPO products have obtained good feedback from their customers, earning the trust of their 20 distributors around the world.

Univapo Miso is an “essential” Starter kit but with several axes in the sleeve.

Enjoy the reading

The package shows on the front: the brand logo, the device, the product name, the warnings, on the back there are the specifications, the packing list, the scratch & check, the bar code, the logos / brands.

Package contents:
1- Miso Pod
1- Miso Battery
1- Type-C cable
1- User Manual



Specifications:
Activation: Automatic / Manual
Measurements: 86.7x23x14.5mm
Weight: 29g
Pod Capacity: 2ml
Refil: Quick lateral
AFC: x2
Coil: 1.2Ω
Power Output: 3-15W
Battery Capacity: 600mAh
Charging time: 20 minutes
Charging: 2A Type-C
Colors: Black, Blue, Red, Green



First Impressions:
For this test I received the Blue, Red, Green specimens all with my name engraved (thanks Univapo).
The cartridge is transparent, the paint looks sturdy, the frame is made of aluminum, the lower part of plastic.
The dimensions and weight of this device are very similar to those of a regular lighter, so the portability and handling are fantastic, you can't really complain.





On one of the wide sides of the Miso there is the Led for notifications under which there is the slightly raised fire button, well clickable and hexagonal in shape, at the bottom on the plastic part on one side is engraved "Miso", on the other, "Univapo".
The decorations on both sides are always in the shape of a hexagon.



Looking at the Miso in profile, on the first of the two sides you can see the cartridge/battery coupling area, the extraction direction is marked by an arrow.
Below, about half height you can see the air inlet hole, its diameter apparently is less than 0.8mm.

On the other side, you can see the tank access grommet at the top, further down is the Type-C 2A fast charging socket.



The compartment / pod contains the two gold-plated contact pins and the small tube for activating the automatic Puff.
On the bottom of the Miso are engraved the place of origin, the logo and the C E trademark.



Let's start with Miso's "axes ", one of these advantages is certainly that of being able to guarantee you the refill without removing the cartridge from the device.



The transparent 2ML cartridge contains a generously sized 1.2Ω coil.
The transparency of the cartridge allows you to view the liquid inside without effort, in the image below you can see (indicated by the arrow) an air inlet obtained in the lower part of the cartridge ...

Hey, folks.

My wife and I each have a couple of the orignal Pico 75s. The torx screws on the bottom and top plates are coming loose and just need a quick tighten.

Anyone know the bit size?

Kinda clueless about this stuff (Had to search for the bit type before even looking...lol).

I have several other mods kicking around, but still love the Pico. Nothing wrong with ours (several years...more?...old now) other than this....

Thanks.

EDIT: sigh....always find something in search AFTER I post the question. It seems it's a T-5 bit. Unless someone knows different, that's what I'm going with.

Please help to share this news with your vaping friends. We are currently the Chinese vape store that can accept PayPal, and supports other payment methods excepted for Paypal.

Product introduction
Uwell Crown 5 tank vaporizer continues the line of its predecessor,filling volume of 5 ml is just right for throwing large clouds.The narrower ring for the airflow control takes up less space and is still easy to use.The installation of the coils is done in no time thanks to the fast plug-pull system. A coil change can also be done on the go. Uwell Crown 5 tank evaporator works with the proven UN2 meshed coils. There are three variants to choose from, each with 0.2, 0.3 and 0.23 ohms.designed for an ideal watt range of 65 to 70 W or 50 to 55 W.

Parameters:
Dimensions: 24 mm
Drip tip：810
Thread: 510 thread
Capacity:5.0 ml
Material: stainless steel , Borosilicate glass

Features:
-Easy filling from above
-UN2 meshed coils with patented self-cleaning feature
-Designed for direct lung pull
-Infinitely variable airflow control
-810 drip tip

Package includes:
1 x Uwell Crown 5 tank atomizer
1 x Uwell UN2 Meshed-H coil atomizer head 0.23 Ohm (pre-installed)
1 x Uwell UN2-2 Meshed-H coil atomizer head 0.3 Ohm
1 x replacement glass
1 x O-rings
1 x drip-tip protective cap
1 x instruction manual

https://www.2fdeal.com/search/?Keyword=sxmini&CateId=$26.9 Authentic SXmini Mi Class 13W 400mAh YiHi SX290 Pod System Starter Kit 1.8ml/1ohm

Features
Powered by YiHi SX290 chipset
Battery capacity: 400mAh
Power range: 7~13W
Cartridge capacity: 1.8 ml
Resistance: 1.0 ohm
Coil material: Ceramic
Stainless steel construction
Photochemical etching
Micro USB port for charging



https://www.2fdeal.com/kf-lite-plus-2021-style-rta-22mm-w-extension-kit-mtl-pin-silver_p16030.html$9.9 KF Lite Plus 2021 Style RTA 22mm w/Extension Kit/MTL Pin

4.0 ml filling volume with tank extension (included)
Infinitely adjustable AEROKON Airflow-Control
360 degrees PSU tank window
Tank extension Dome included
2-post Deck
Compatible with KF [lite] accessories
MTL DripTip included



https://www.2fdeal.com/search/?Keyword=bishop&CateId=Ambition Mods and The Vaping Gentlemen Club Bishop 22mm MTL RTA

Features
Capacity: 4ml
Material: 316SS
Super silent draw
Quick access deck
Double opposing air flow for enhanced flavor
Customizable air pins from 2 x 0.8mm, 2 x 1.0mm, 2 x 1.2mm, plus a Blind Air Pin
Dripping juice feeding system to keep juice fresh and clean
Wide juice refill area
Smart deck for quick build
Perfected for MTL vaping experience


https://www.2fdeal.com/search/?Keyword=profile&CateId= Wotofo Profile M 24.5mm RTA
Coupon Code:MAPPROFILEM

The Vapx Meteor is an 80w output Temperature Control capable box mod that has a 2000mAh internal battery and a 510 thread connection. Except for a popular USB-C port equipped at the foot, the Meteor is also fitted with a 4-foot contact pin on the bottom to achieve a 45w supercharge function via an alternative charging dock.


Don't forget to use Coupon (PD12) to get an extra 12% off at the checkout!

Click here to check them out: Vapx Meteor 510 80w TC Box Mod

We're looking for Vape Wholesale partners eagerly. Join us here: Vape Wholesale Supply, Vape Wholesale China - AVE40

Welcome you, vendors, to view our catalog online and navigate through the process for Vape Wholesale, set up your wholesale account, or drop us an email at info@ave40.com first

I have got this device occationally from the giveaway hold by Joyech and have used the device for one week. It's really great for me as a new vaper. The EN coil lasts a whole week and now it still tastes great, maybe the AST-STEEL inside works. What I appreciate the best is the device does NOT leak like other vape pods. Just a good suggestion for new vapers like me .

Geekvape Aegis Max Kit is an entry-level vape kit produced by Geekvape. It is powered by a single 18650/21700 battery, with a maximum output power of 100W, and has an IP67 protection level. Geek Vape Zeus Tank has a juice capacity of 5ml and is compatible with GeekVape ZEUS MeshZ series coils. Geekvape Aegis Max is a vape device with powerful performance and great flavor.



In terms of appearance, the Geekvape Aegis Max Kit is made of zinc alloy materials and combined with an IP67 protection level, which is very durable. At the same time, it is also a very compact vape kit. Its overall size is only 93 * 46.3 * 34 mm. It is very comfortable to hold in the hand and can also be carried in a pocket. There is an intuitive ignition button on the side of its fuselage, which is very natural to operate. It also has an OLED display that can clearly display all vaping data. It also has a variety of color options, including: Black Space, Grey Pearl, Black Tungsten, Red Phoenix, White Storm.

In terms of performance, Geekvape Aegis Max Kit is equipped with an advanced AS-100 chipset and is powered by a single high-rate 18650/21700 battery. The minimum output power is 1W and the maximum output power is 100W. It can support a resistance range of 0.05-3.0ohm, and supports multiple output modes, including Power Mode, VPC Mode, TC Mode, TCR Mode, Bypass Mode, etc. In the TC mode, Geekvape Aegis Max is compatible with stainless steel, nickel and titanium wires.

As for the Geek Vape Zeus Tank, it is connected to the mod through a standard 510 threaded interface. Its juice capacity is 5ml, and it is made of 304 stainless steel and heat-resistant glass, which is very durable. Geek Vape Zeus Tank is compatible with GeekVape ZEUS MeshZ series coils. The 0.4ohm mesh Z1 coil and 0.2ohm Mesh Z2 coil are sold together with the kit. The 0.4ohm mesh Z1 coil has a rated power of 60-70W and the 0.2ohm Mesh Z2 coil has a rated power of 70-80W. The coil is installed by pressing, which is very simple and convenient.

Features

100W max power output
IP67 Waterproof / Shockproof / Dustproof
High-performance Power/VPC/TC/TCR/Bypass modes
Intuitive with raised Firing and Adjustment Button
The appearance is simple and generous, the shell is frosted and the hand is comfortable.
Compatible with 18650/21700 battery
Child Safe Locking Drip Tip
GV mesh coil, purer flavor & great clouds
Combination of both direct top airflow and the top-to-bottom airflow
OLED screen for a vivid display
Threaded Top Fill System-Dual Fill Ports

Quick link: Geekvape Aegis Max Kit 100W with Zeus Sub Ohm Tank