MTL is an atomization style that usually provides tighter and precise airflow and is often used with low-power high-resistance coils. We tell you more information through Augvape Intake MTL RTA.

Parameter
Augvape intake MTL RTA
Bubble glass
O-ring
4 x air plug
4 x reverse screws
2 Clapton coils
User manual

Augvape Intake MTL RTA is the latest product in the series, including Intake Sub Ohm fuel tank, Original Intake RTA and Intake Dual RTA. The deck is specially designed for single coil construction, with a diameter of 24mm, which is easy to build.

You can also get 2 MTL Clapton Ni80/Kanthal vape coils with a resistance of 0.8ohm, ready to use. There are currently two capacity options-3.1ml straight mouth glass and 4.6ml bubble glass-you can find them both in the standard kit.

Other atomizers you may like:
vandy vape requiem rda review
ijoy flash tank review

Hi, guys! Welcome to New Product Introduction! I have a question: do you need an Pod Kit at present? Today let me introduce you one pod kit named Joyetech ObliQ 60W Pod System Kit. Now let’s take a closer look at the pod kit below.

Original Joyetech ObliQ Pod System Vape Starter kit is an innovative pod device which can be utilized for both MTL (Mouth to Lung) and DL (Direct Lung) vaping. Joyetech ObliQ has a leaning shape and breeze patterned glass panel, refined metallic construction with a compact form factor, it can be completely controlled by one hand. ObliQ is powered by a 1800mAh built-in battery which can fully charge in 60 minutes, thanks to the 5V /2A charging current, so you can spend less time waiting and more time vaping. Along the side of the device, you'll find the fire button, a display screen, the up and down buttons, and the Type-C charging port. Easily navigate the settings and adjust the wattage to your preference, maximum wattage up to 60W. ObliQ integrates intelligent Avatar. AI Memory Chip, the device will give the optimum output automatically when the cartridge attached on.




Main Features:
Size: 85 x 42 x 22.6mm
Battery Material: Zinc Alloy + Bending Glass
Pod Cartridge Material: PCTG
Battery Capacity: 1800mAh
Output Wattage: Max 60W
Charging Current: 5V / 2A
Charging Port: Type-C
E-liquid Capacity: 3.5ml
Filling Type: Top Filling
Coils: EZ 0.4ohm
1800mAh Battery Capacity
2A Type-C Fast Charge
60min Full Charge
Avatar Memory Chip
Max 60W Output
3.5ml Capacity
Top Filling E-liquid
Leak Proof
Compatible with EZ Coils
Side Airflow
Ergonomic Mouthpiece

If you want to get one, you can come here:
Joyetech ObliQ Pod System >>>
---------
3FVAPE Site-wide 5% OFF for 2020 Halloween
Coupon Code: Halloween2020
Time: 2020-10-30 00:00:00 ~ 2020-11-01 23:59:59 (UTC-7, same time as Denver)
Note: This coupon code is not stackable with other codes.

Hey guys. This time I'm gonna bring you a disposable vape named HQD Super. Cheap disposable vapes are always a good choice for handy vaping, so you might as well take a look.

HQD Super is a concise but not simple pre-filled disposable pod device, providing an excellent vape experience while maintaining its compact size and portability. HQD Super features exquisite shape, comfortable cylindrical profile, and equipped with a flat drip tip made of heat-resistant plastic, and very close to traditional cigarette taste. HQD Super Disposable device is powered by a built-in 400mAh battery. Thanks to inhaling activation you can inhale on the HQD Super's mouthpiece to activate it, delivering a more natural vaping style.

So you need not be worried about pressing any buttons for the charging and refilling. An LED light will appear on the bottom of the device and will light with every inhale. Each HQD Super Disposable Pod Device comes with a pre-filled 5% (50mg) of E-juice that is enough to stay satisfied for the whole day and consists of 600 Puffs. There are a variety of flavor options available to satisfy taste buds. The HQD Super is always at your service.

You may also like:
myle mini flavors
hqd 1200 puff

Hi, guys! Welcome to New Product Introduction! I have a question: do you need an RTA at present? Today let me introduce you one RTA named Kayfun V5 RTA Clone. Now let’s take a closer look at the RTA below.

The KayFun V5 RTA Clone is a rebuildable tank atomizer features 5.0ml e-liquid capacity and 22mm diameter. The top filling design with 7 juice holes will makes it easy to refill. The KF V5 RTA Clone comes with dual posts for single coil build, will bring you good vaping taste.




Main Features:
510 threading connection
Diameter: 22mm;
Removable 510 drip tip;
Anti heat drip tip with POM inlay (engraved);
Top filling design;
E-juice capacity: 5ml;
Liquid control (fully adjustable);
2 big air slits on the bottom

If you want to get one, you can come here:
Kayfun V5 RTA Clone >>>
---------
3FVAPE Site-wide 5% OFF for 2020 Halloween
Coupon Code: Halloween2020
Time: 2020-10-30 00:00:00 ~ 2020-11-01 23:59:59 (UTC-7, same time as Denver)
Note: This coupon code is not stackable with other codes.

The Yocan Armor Plus is a compact device that has a nice build quality and provides smooth and efficient hits. This Yocan device is equipped with QTC & QDC coil. A solid choice for anyone wanting to use a dependable and reliable concentrate pen.
Yocan Armor Plus Premium Vape Pen is a sleek and powerful portable vape.



Main Features:
Discreet yet effective
Popular QDC Coil & QTC Coil
QTC coil for big cloud chasers
QDC coil for smooth essence
Functional Coil Cap
Featured 3 Voltage Levels (3.4v, 3.8v and 4.2v)
650mAh Battery
Micro USB charging
Available in 6 stylish colors: Black, Silver, Rose Gold, Royal Blue, Red and Green

Learn more Yocan Armor Plus information, please visit yocan.com

Together with creators of the world’s First RTA that works with both cotton and mesh, NoName, Aspire Prestige re-engineered a new innovative RTA MTL tank that packs a superior performance which you would love!


The 9th tank is designed as a premium MTL RTA tank through the cooperation between Noname and Aspire, it can use both AVP Pro coils and its RBA deck, together with Aspire’s precise airflow system design, it will bring you incredible MTL flavor and airflow experience.

At the first to hold this Joyetech Obliq, we got just one feeling, that's amazingly beautiful! With the leaning shape and breeze patterned glass panel, Joyetech Obliq Pod Kit stands out from all.



Main Features:
1. Leak-proof cartridge, top-filling system, with side airflow valve
2. Compatible with EZ series of coils which provide you pure flavor
3. 1800mAh built-in battery, max output power 60W, with a colorful screen
4. Leaning shape and breeze patterned glass panel, beautiful and comfortable grip

You may also interested in:
Vaporesso LUXE PM40

Check more new and latest e-cigs on ElegoMall. And for any inquires of vape wholesale in China, feel free to contact Elegomall.

Register on ElegoMall now and then enjoy best price of all the great original and latest vape devices on Elegomall.

Freemax mesh sub ohm tanks are welcomed by many vapers because its good flavor with long lasting pure taste and long life span of its vape coils. All these outstanding features of Freemax sub ohm tanks should give the credit to Freemax innovative Coiltech.



Now the development of Freemax Coiltech is from FM 1.0 to FM 4.0, and different Freemax tanks adopt different FM Coil technology.

1. Freemax Fireluke M Tank adopting FreeMax COILTECH 1.0: World’s First Mesh Coil in the form of connected strands of metal along with 100% Japanese organic cotton.

2. M Pro Tank utilizing FreeMax COILTECH 2.0: HoneyComb Mesh with 90% Flax Fiber (Wood Pulp) Cotton and 10% Japanese Organic Cotton Formula.

3. Fireluke 2 Tank adopting FreeMax COILTECH 3.0: Diamond mesh with 90% Tea Fiber Cotton and 10% Japanese Organic Cotton Formula.

4. Fireluke 3 andf M Pro 2 Tank utilizing FreeMax COILTECH 4.0: Military Grade SS904L Mesh with Tea Fiber Cotton formula (95% Tea Fiber Cotton plus 5% Organic Cotton)

If you want to know more information about Freemax Coiltech, please enter freemaxvape.com directly.

The Vapefly Siegfried 25.2mm RTA is a 69mm in height Rebuildable Tank Atomizer that features a unique hollow build deck to accept a single coil or a single mesh coil configuration. It eliminates excessive operations on cotton trimming and allows a fast cotton saturation from the bottom.

Also, there're three types of mesh coil available to offer three kinds of flavor deliveries.

Don't forget to use our Halloween Sale Coupon (HS16) to get an extra 16% off!

Click here if interested: Vapefly Siegfried 25.2mm RTA
Click here to check out the coil accessories: VapeFly Siegfried Mesh Replacement Coil

We're looking for Vape Wholesale partners eagerly. Join us here: Vape Wholesale Supply, Vape Wholesale China - AVE40

Welcome you, vendors, to view our catalog online and navigate through the process for Vape Wholesale, set up your wholesale account, or drop us an email at info@ave40.com first

https://www.2fdeal.com/search/?Keyword=intake&CateId=$25.99 Augvape Intake MTL 24mm RTA 3.1ml/4.6ml
Coupon Code:MAPINTAKEM

Capacity: 3.1ml (standard) / 4.6ml (Bubble glass)
6 airflow outlet plugs: 3.7mm (without air insert) / 1.8mm / 1.6mm / 1.4mm (pre-installed) / 1.2mm / 1.0mm
Top adjustable airflow inlets C leak proof
Single coil build deck
Screw top refill cap
Augvape state that the top airflow adjustment can give a restricted Direct to Lung vape or a MTL vape.
Below the coil is the airflow outlet, the size of this outlet can be changed to your preference using the included air plugs.


https://www.2fdeal.com/c/mechanical-mod_0372 Vapefly Siegfried 18650/20700/21700 Tube Mod
Coupon Code:MAPSIEM

Battery type: 1 x 21700 / 18650 / 20700 battery (Not Included)
Output mode: Bypass
LED indicates: Green light: 3.8V or above / Blue light: 3.4~3.8V / Red light: 3.4V or below
Stainless steel construction, polished
CNC Milled Dragon Motif
Tube Mod with 3S Chipset (Nano coated)
18650, 20700, or 21700 applicable
Power Output in Bypass Mode
LED indicates battery charge status
Several Protection Functions: Safety protections: Short Circuit / Reversed Battery Connection / Over-current / High Temperature / Nano-coating to avoid water(e-liquid) intake / 10s Cut off Protection


https://www.2fdeal.com/search/?Keyword=vapinggt&CateId=$22.95 VapingGT GT Pen 40W Pod System Vape Starter Kit

Features
Battery: Built-in 900mah battery
Pod capacity: 2.0ml
Resistance: 0.5ohm GT Pen Coil
Powered by 900mAh built-in battery with Max output power 40W
Compact & portable size
0.5ohm GT Pen Coil, with a base to steady the coil and prevent oil leakage
Half-transparent cartridge
Side-filling system Design
900mAh built-in battery and 40W max output
2.0ml pod cartridge and side filling design
Stable and fast type-C charging port
Battery power indicator and multiple protections


https://www.2fdeal.com/search/?Keyword=experiment&CateId=Vazzling Experiment 3 MTL 22mm RTA 2.5ml

Features
22mm Diameter
2.5ml capacity
Top filling
AFC holes: 0.8mm/1.0mm/1.2mm/1.4mm/1.6mm
Peek insulators
2 air pin
2 air turrets
2 chimneys

Lost Vape Grus Box Mod 100W!


Efun.top new arrival Efun New Arrivals - Latest Vaporizers and Vape device
Sale Products Efun.top Vape Sales Online Shop
US Warehouse Vapes and E-juice in US Warehouse - Efun.top

See imgur.com/a/Yem5bdF for the full set of charts, results and tests, the attached is the one of 7 tests/states/charts.

TLDR: These are hands down the best out of the box results I have seen from from a cheaper mod so far. Compare the result to the DNA 75 and its not too far off in most states imgur.com/a/7Pe3Gad. You could argue this is better than a DNA out of the box because you dont have to do anything to ensure its pretty much accurate (A DNA mod requires the Steam Engine SS316L profile to be installed via escribe for best accuracy...anyone who says DJacquith or stock should see my test results on those profiles before commenting).

This Aegis Solo looks like a better result than previous Geekvape tests like the G-Box reddit.com/r/electronic_cigarette/comments/gf5pft./temperature_control_testing_results_geekvape_gbox/.

I am told there are two different types of boards running different Geekvape mods so maybe check before applying this result to other Geekvape mods. The controller in this mod is as follows I believe: ARM Cortex-M0 Nuvoton NUC220LE3AN. I think the other mods with this controller include the Aegis Mini/Nova/Max, ONLY! Without this component, the Geekvapes dont appear to perform well.

Looking for the black bottle for the topside 90w. I have a few clear bottles I'd be willing to part with if that'll sweeten the deal.

Imgur version of post with all charts and analysis here: imgur.com/a/vc6hvEr
Eleaft iStick Pico 75 - TC bang for buck that is remarkable - Temperature Control Testing ResultsArctic Fox Firmware 190624 Stock SS316 Profile : Vaping

The attached is the first of 7 charts/states tested and does not represent overall performance - see IMGUR or Reddit for full report and analysis, or the TLDR summary. See a full list of mods tested so far, at the bottom of the full post for comparison.

TLDR: I bought this little mod for merely $15 bucks in a sale, and yet other than one (repeatedly tested) very different outcome for a (rarely realistic) completely dry MTL coil, it performs very well as a temperature control device, with good power (unless youre a very high mass dual coil vaper, in which case you need a dual cell mod), tight and accurate temperature control that is arguably largely comparable to DNA in most states (see imgur.com/a/EOL9hRE for current DNA series comparison). Its hard to beat in terms of price for performance...lets see how the stock firmware compares in an upcoming test. This Arctic Fox firmware provides a lot of the functionality of a DNA device, its free, and its compatible with a lot of Eleaf, Wismec and Joyetech mods! More testing required to see if it holds up across that range.

I no longer have a Topside but I did purchase an extra bottle kit. This is ready for a Topside owner.

$10 shipped via USPS First Class mail. Payment via PayPal.

Thanks.

Product introduction
Aegis Legend 200w mod, is a newly released masterpiece by Geekvape. Inheriting the waterproof, shockproof and dustproof features from the former Aegis Mod, the Aegis Legend is constructed with up to six different materials to achieve extreme portability and durability, making it one of the most complex box mod in industry.

Parameters:
Aegis Legend Mod
Power range: 5- 200W
Powered by dual 18650 batteries (Not included)
Resistance range: 0.05Ω- 3.0Ω
Temp range: 100- 315℃/ 200- 600℉

Features:
-Shock resistant: Legend VS Original Version
-Easily accessible USB port for both charging and firmware update
-One way venting holes in case of battery failure
-Powered with dual 18650 batteries for power and longer lifespan
-Wide range of new colors will be released
-IP67 water resistant& dust resistant, great for outdoor activities

Package includes:
1x Aegis Legend Mod
1x USB Cable
1x User Manual

Review.
SMOK Thallo S 100W & Thallo 80W Kit

Hi everyone, let me start off saying the Unico Mod Pod is the best vape i have ever used .the taste is better and i love you predict how strong you want it to be.i started having problems with mine on monday with my magents coming out and now i cant get the mouth piece to lock in place and because of that i can only get 20w out of 49w .im wondering if anyone has had the same issues .

SMOK Thallo S 100W & Thallo 80W Kit



Smok Thallo & Thallo S Kit are two new proposals very similar to the already known versions of VooPoo and Aspire but with some interesting upgrades that in my opinion make them attractive for those looking for valid alternatives.

Enjoy the reading

The front packs (logically) differ from each other depending on the mod contained, so we find the pic of the device, the type of coil adopted and the main features in the form of an icon.

On the back of the packages are indicated: the content, some warnings, logos & brands.



A numeric code, a bar code, the address of Shenzhen IVPS Technology CO, LTD, a hologram and the scratch & check ... We find them all displayed on the sides of the package.



Thallo S 100W Content:
1 * SMOK Thallo S Device
1 * Thallo RPM 2 Pod (5ml)
1 * 0.16Ω RPM 2 Mesh Coil (25-50W)
1 * 0.6Ω MTL RPM 2 Coil (12-25W)
1 * Type-C Cable
1 * User Manual

Thallo 80W Content:
1 * SMOK Thallo Device (3000mah)
1 * Thallo RPM 2 Pod (5ml)
1 * Mesh Coil RPM 2 Mesh 0.16Ω (25-50W)
1 * Coil RPM 2 DC 0.6Ω MTL (12-25W)
1 * Type-C Cable
1 * User Manual



Thallo S 100W parameters:
Frame construction: Zinc alloy
Chipset: IQ-XS
Reaction time: 0.001 s
Screen: 0.96 "color
Dimensions: 129.1x37.5x31.4 mm
Weight: 107gr (battery excluded)
Battery: single 18650/21700 (not included)
Output: 5-100W (21700) / 5-80W (18650)
Output voltage: 0.5-4.0
Input voltage: 3.3-4.2V
Resistance range: 0.15-2.5Ω
Charging voltage: 5V ± 0.2V
Charging current: max 1.4A
Stand by current: <120uA
Tank capacity: 5ml
Drip-Tip: replaceable
Coil installation: Press Fit
Pod connection: magnetic
AFC Control
Low voltage protection
Short circuit protection
8S cut-off protection
Thermal protection

Thallo 80W parameters:
Frame construction: Zinc alloy
Chipset: IQ-XS
Reaction time: 0.001 s
Screen: 0.96 "color
Dimensions: 123,65x37,7z30 mm
Weight: 148gr
Battery: built-in 3000mAh
Output: 1-80W
Output voltage: 0.8-4.0
Input voltage: 3.3-4.2V
Resistance range: 0.15-2.5Ω
Charging voltage: 5V ± 0.2V
Charging current: max 1.2A
Stand by current: <100uA
Overcharge Voltage: 4.3V ± 0.05V
Overcharge Current: 2A ± 0.6A
Over-discharge Voltage: 2.4V ± 0.05V
Tank capacity: 5ml
Drip-Tip: replaceable
Coil installation: Press Fit
Pod connection: magnetic
AFC Control
Low voltage protection
Short circuit protection
8S cut-off protection
Thermal protection



Five new colors + six Fluid colors:
Black, gray, red, blue, brown
Fluid Black Red, Fluid Gold, Fluid Green, Fluid Blue, Fluid 7 colors, Fluid Black Gray



SMOK Thallo S 100W & Thallo 80W Kit Upgrade:

When I unpacked these new SMOK kits, my first concern was to verify that all the salient strengths that made VooPoo's Drag-S and Drag-X so popular were present.

Yes, compared to the competition, SMOK has maintained its strengths and successes such as: magnetic circular Pod, large liquid capacity of the pod, ergonomic line of devices, AFC adjustment, attractive design and use of precious materials ...

What makes the new SMOK Thallo S 100W & Thallo 80W devices special is mainly that they have adopted a large 21700 battery (Thallo S 100W) and an equally large 3,000mAh built-in battery on the Thallo 80W.

Another pleasant surprise that SMOK has FINALLY reserved for us is the possibility of being able to change the Drip-Tip 510 to our liking, a particular not insignificant and certainly appreciated by everyone.



The tactile sensation of the materials is the same (positive) found with the competition in the previous tests ... Faced with the larger size of the batteries used, these two Smok devices compared to the Drag-X / S have undergone a natural and slight change in their size and design, while remaining very manageable and aesthetically pleasing without excess.



Both devices on the front have a 0.96-inch color display, the adjustment keys and the fire button are made of plastic, are slightly protruding and all quite comfortable to click.
The USB Type-C charging port is positioned at the bottom, so you can keep your devices standing while charging.

The handle is more rounded than the "thinner" devices of the competition, the soft PU leather used as a coating has beautiful liquid patterns of colors and is always pleasant to the touch.



The main visual difference in the design of Thallo S & Thallo (compared to competitors) can be seen on the side profiles, in fact the front panel that houses the control panel is more protruding than the central body, this is certainly due to the fact that with the use of larger batteries had to find the right space to house the chipset.

At the bottom, on the side profile of the front panel, the SMOK logo and the words Thallo or Thallo S (depending on the version) are shown.

Wotofo Manik Pod Mod Kit 80W!


Efun.top new arrival Efun New Arrivals - Latest Vaporizers and Vape device
Sale Products Efun.top Vape Sales Online Shop
US Warehouse Vapes and E-juice in US Warehouse - Efun.top

Rincoe Manto AIO XR 80W Pod Mod Kit is constructed of PC Shell + ABS + PCTG. Rincoe Manto AIO XR Pod Kit is powered by single 18650 battery and can reach up to 80W output. Rincoe Manto AIO XR 80W Pod Kit is equipped with 0.69 inch OLED screen to show vaping data clearly. Rincoe Manto AIO pod has 3ml capacity and 0.3ohm/ 0.15ohm mesh coils. Rincoe Manto AIO cartridge adopts adjustable bottom airflow system. Rincoe Manto AIO can support MTL & DTL vaping.



Parameters:
Size: 25.5* 50.0* 80.0mm
Material: PC Shell + ABS + PCTG
Battery: single 18650 battery(not included)
Output: 1-80W
Output currert : Max 30A
Output voltage : Max 42V
Input voltage: 3.0-42V
Resistance range: 0.1 - 5.0ohm (Recommernded 0.3ohm)
Screen: 0.69 inch OLED display
PCB Efficiency: 95%
Charging: USB 5V/1A
Capacty: 3ml
Resistance: mesh 0.3ohm coil
mesh 0.15ohm coil
510 drip tip material: POM


Features:
Powered by single 18650 battery, 1-80W output
0.69 inch OLED screen
Adjustment airflow mechanism
MTL & DTL vaping

Packages:
1* Rincoe MANTO AIO XR 80W Kit
1* User Manual

Uwell Caliburn, as one of the best selling pod systems, there are always some new competitors want to match it. Previously we have compared Vaporesso XROS with the Caliburn, now another very silimar product is coming – SIMMI by Vaporbucks. Though we also added the XROS in this new comparison, we will talk more about the SIMMI VS Caliburn in this post.

Here we go.



Summary
Obviously, we can see there are so many similar points between SIMMI & Caliburn, including battery capacity, almost the same size, simple appearance, refillable pod, coil not changeable, 2 working modes.

SIMMI only holds 1.8ml juice, not a big difference with 2ml, but there are 3 different coils for the SIMMI – 1.2ohm & 1.4ohm for MTL, 1.0ohm for restrict DL vaping. And you can check the juice level via the 2 small windows without taking the whole pod out like Caliburn.

Based on the test results by HealthCabin team, we are happy to see the flavor performance of SIMMI is able to match Caliburn! While the SIMMI is $3 cheaper than Caliburn.

If you want a cheaper Caliburn alternative, take the SIMMI into your consideration.

In today's article, we'll take a look at a simple and affordable sub-format device called Simmi kit from Vaporbucks. A little-known Chinese manufacturer Vaporbucks, specializing in the development of pod system kit, has recently presented another such product.

Specifications:
Cartridge dimensions: 37.8mm * 11.9mm * 21.5mm
Battery pack dimensions: 92.9mm * 22mm * 12mm
Material: aluminum alloy
Battery: 520mAh
Charging: Micro USB, 1A
Capacity: 1.8ml
Evaporators: 1.4Ω, 1.2Ω, 1.0Ω

The compact device received a classic design for its class, a high-quality aluminum case and a couple of interesting features. The new Simmi Pod Vape Kit at the time of release received five available color options: gray, pink, white, red and black.

The vape device is equipped with a noticeable Fire button, but is able to supply voltage to the evaporator automatically when tightening. Also, the device is equipped with a built-in battery with a capacity of 520mAh, which can be charged through the Micro USB port located at the end, and the maximum charge current, in turn, will be 1A.

Other kits you may like:
rda requiem price
zeus nano tank price