The OBS Cube S is the first of two new Cube releases from OBS. The OBS Cube S is an overhaul of the original external battery OBS Cube which was released a while ago.

═╣ OBS Cube S ╠═

00:00 ◄ Intro and specs
01:50 ◄ Close up
07:43 ◄ Temp Control & Wattage Vape
10:12 ◄ Thoughts


Login to view embedded media

I know, I know... this topic has been discussed to death. And, I am in the process of searching now.
I have a TFV8 tank that started leaking a week or two ago. I tried all the usual tricks (empty and clean all parts, don't over tighten, replace o rings, etc). Nothing helped. After a few days of covering the mod with a paper towel everytime I took a drag, I decided to buy a new tank. The new TFV8 arrived yesterday afternoon, and after checking it out and filling it with juice, it is doing the exact same thing.
We are not talking about a drop leaking here and there, it is leaking the whole tankful in less than two hours.

Any suggestions?

Thanks!

Sent from my SM-G965U using Tapatalk

I
Had this sold a bit back and sale fell through. So here it is again for sale for less. GG Penelope V3 for $175 plus shipping.


Sent from my iPhone using Tapatalk

I used to buy an e-liquid in a flavor that (I think!) was called Moroccan Sunrise. Don't recall the brand or where I got it, but I would love to find more or mix up something like it. Not finding it online anywhere so I assume it was discontinued.

Does anyone know the brand and/or - even better - the flavor ingredients?

86,000 Disposable Vapes Seized by Customs Agents - Vaping360

"We found the Alphaa Onee Plus for sale to American customers on two websites for $20.99 and $21.99. Assuming it sells in stores for about the same price, the “street value” of the Pennsylvania shipment would be a little under $1.9 million (CBP says $1.72 million). Further assuming that its wholesale cost was about $4 per unit (including shipping), that would be a profit of over $1.5 million split between the distributor and retailers."

Hello,

I am selling my entire lot of vape gear because I stopped vaping many months ago and I'm also selling my house so I have a lot of stuff to part with. I was definitely more addicted to buying vape stuff than vaping itself, so almost everything listed below is in practically new condition because I used it briefly or not at all. I could only post 10 pictures to this listing so if you want close-up pictures of any of the Atomizers just let me know. Everything has its original box or packaging.

I am selling everything as a lot for $500 shipped within the continental US. Payment via PayPal.

Thanks for looking - PM me if you want more info or pictures.

Mods:

• Dotmod Mechanical Squonk - Red w/ red/white squonk bottles, transparent red and amber plates + amber button
  
  
• Dotmod 100w Squonk - Black w/ black/white squonk bottles
  
  
• Voopoo Drag 157w Kit - Green and Gold
  
  
• Voopoo Drag Mini 117w Mod - Green and Black
  
  
• Shatter Blaster 2.0 (Artery Nugget) 50w Portable Mod - Gold
  
  
• Council of Vapor Mini Volt V3 40w Portable Mod - Black
  
  
• Council of Vapor Mini Volt V3 40w Portable Mod - Grey
  
  
• Vandy Vape Simple EX Kit - Black
  
  
• Eleaf BASAL 30w Mod - Silver
  
  
• Voopoo Caliber Kit (tank/coil never used) - Gold
  
  
• Lost Vape Q-Pro Kit w/ 4 pods - Green/Blue Stabwood
  
  
• Smok Fetch Mini Kit w/ 5 pods, 3 new coils, and grey leather case - Green
  
  
• Teslacigs Innovator Kit w/ extra black tank - Green
  
  
• iJoy Want Kit (tank/coil never used) - Black

RDAs:

• MTERK Terk V2 (Unloaded) 24mm RDA w/ extra 25mm cap - Gold
  
  
• MTERK Terk V2 (Unloaded) 24mm RDA w/ extra 25mm cap - Red
  
  
• Haku Venna Ti 22mm RDA - Light Blue
  
  
• 528 Custom Vapes Goon v1.5 24mm - Gold w/ extra v1 Olive Green Cap
  
  
• Odis Design O-Atty v2 22mm RDA - Silver w/ extra Ultem Cap
  
  
• Odis Design Odis 16mm RDA - Silver
  
  
• (x2) Ironsmith Furnace 22mm RDA - 1 used and 1 brand new
  
  
• (x2) HellVape Dead Rabbit SQ 22mm RDA - Emerald Green / Gold
  
  
• Vandy Vape Bonza 24mm RDA - Silver
  
  
• DigiFlavor Drop Solo 22mm RDA - Gold w/ Ultem Cap
  
  
• Asmodus Bunker 24mm RDA - Gold
  
  
• Geek Vape Loop 24mm RDA - Gunmetal / Green
  
  
• Boomstick Reaper 18mm MTL RDA - Brushed Copper
  
  
• (x4) Oumier Wasp Nano 22mm RDA - Green / Clear / Black / Gold
  
  
• (x2) Oumier Wasp Nano 22mm RDTA - Black / Gold
  
  
• Dovpo Bushido 22mm RDA - Silver
  
  
• Dovpo Bushido Plus 22mm RDTA - Silver
  
  
• (x3) Council of Vapor Royal Hunter Mini - Green / Black / Light Blue
  
  
• Whisper Styled 22mm RDTA from Jun427Vape - Silver

RTAs:

• Voopoo Rimfire - 26mm RTA w/ InkedAtty 10ml expansion kit - Gold w/ Green Glass
  
  
• Geek Vape Zeus X 25mm RTA - Green (never used)
  

• 
  
  
  
  
  
  
  
  

I'm so tired of the recent "mesh only" craze. I just don't understand it at all.

I have used roundwire sub tanks for close to 4 years, and can generally get a pretty accurate flavour representation from my juices. Obviously some are better than others, but the og Uwell Crown coils and .4 Cleito coils are pretty stellar.

Recently decided to mix it up and try something new, so i went on the hunt for a new sub tank, only for the market to be completely littered with mesh-only tanks. The only tanks i could find that still use roundwire are from years ago.

I figured i had been missing something, so i picked up a collection of mesh sub tanks, only to be dissapointed by every one of them.

The list was:
Ehpro Raptor with both the raptor coils and the Horizontech Falcon coils.
Innokin isub B.
Aspire Odan Evo.
Aspire Cleito Pro.
Geekvape Zeus.

I got absolutely zero of the liquid nuance that i get from 3+ year old roundwire coils. I just get a blast of full-on "all the flavours at once", and for juices with sweetener, that is the primary profile. Interestingly, i found that with fruit flavours, it was a little more palatable, but since i primarily vape bakerys this wasnt all that much use.

I figured i would give the mesh rta's and rda's a shot, as everyone is raving about them, so i picked up:
Wotofo Profile RDA.
Wotofo Profile Unity RTA.
VandyVape Mesh RTA.

Tried all of them, same dissapointing experience. They were basically mesh sub tanks in RTA form. Literally exactly the same "flavour".

So, after wasting a chunk of money on all of these, im back to using the Cleito Pro with the 0.4ohm Cleito coils and the Uwell Crown Mini with the og Uwell Crown coils with the occasional use of the Wake Mod co RTA when i can be bothered to rebuild.

Is it just me? I dont understand the hype in any way. Maybe it's just my particular flavour profile doesn't work great with mesh, or maybe its just me, i dunno. It's just a shame to see that any recent sub tanks that come out are all mesh, apart from the very occasional sprinkling of roundwire thrown in here and there.

Anyone else have a similar experience? And have any recommendations on recent sub tanks to try that aren't just mesh?

Hey guys. This time we'll be covering the Argus Pro Kit by VOOPOO. You may wanna give it a shot if you like portable pod mod devices with high power, let's dive in for more.

VOOPOO Argus Pro kit combines performance and aesthetics. It is made of zinc alloy and leather that has an elegant appearance and compact size, and its ergonomics in the hand is excellent. There is a fixing ring above the control panel of the device and can be worn with a lanyard. Easy to carry, vaping anytime, anywhere. The Argus Pro is powered by an internal, long-lasting 3000mAh battery. Powered by the upgraded GENE.TT Chipset enables the Argus Pro Kit to ignite within 0.001s and provides a variety of smart functions such as PUFF recording, SCORE ranking, SMART switching start mode, etc. This intelligent chipset also features a maximum power output of 80W and a coil recognition system that automatically matches the installed coil with the best wattage.

Fixed at the top of the mod is the 4.5mL PnP Pod, made of eco-friendly food-grade PCTG plastic. and the pod attaches to the Argus Pro seamlessly via a strong magnetic connection. Provide the simplest and most sanitary way of bottom filling oil. The kit included two PnP coils perfect for DL (direct lung)vaping. 0.3 ohm PnP-VM1 Coil and 0.15 ohm PnP-VM6 Coil. Additionally, the Argus Pro pod is compatible with all coils in the VOOPOO PnP Coil Series. Near the top of the Argus Pro is the Innovative Infinite Airflow System, an adjustable dual-slotted airflow valve. Whether it is DL, Restricted DL, or MTL, there are almost no restrictions, and the airflow can be optimally adjusted to suit individual needs. In addition, a silicone pod sleeve with a hole is pre-installed outside the Argus Pro Pod, protects pods from abrasion and scratches.

You may also like:
cheap ryse max vape
smok novo 2 near me

When introducing the Vaporesso's Luxe PM40 kit, designed to provide maximum versatility for vape users of any experience level. Luxe PM40 is powered by a 1800mAh built-in battery, which can be quickly charged 2A, can provide up to 40W of output power, and can be used all day.

Specifications:
1800mAh Integrated Battery
40W Max Output
AXON 2.0 Chipset
2ml Refillable Pods
Wide Range of Coil Compatibility

Adjustable power and sliding airflow function make it easy to customize your device, and the side-mounted screen display can even help beginners who use vape to determine and track their personalized settings.

Vaporesso Luxe PM40 has a built-in AXON 2.0 chipset, which ensures fast startup and prevents overcharging and overheating, and provides a 10 second cut-off time. The included container can hold up to 2ml of your favorite e-liquid and is sealed with a silicon coil to prevent leakage.

It also includes GTX 0.6ohm coil and GTX 0.8ohm coil, which is very suitable for experienced users or beginners who want to conduct experiments. The Vaporesso device is also compatible with MTL coils (sold separately), and high PG e-liquid is recommended.

Related vape device we recommend:
vape coupons for sale
PMTA Vaping for sale

https://www.2fdeal.com/search/?Keyword=MIXX+&CateId=Aspire MIXX 60W VV VW 18350/18650 Box Mod




Features
Material: Satin Anodized Aluminum + Surgical Grade Stainless Steel
Battery Type: 1 x 18350 / 18650 (Not included)
Output Wattage: 1~60W
Resistance Range: 0.1~3.5ohm
Screen: 0.91-inch OLED Screen
Supporting Mode: VV Mode / VW Mode / Bypass Mode
Made with the italien modder Sunbox
Conductivity and speed



https://www.2fdeal.com/search/?Keyword=pallas&CateId= Gas Mods Pallas MTL 22mm RTA




Features
510 threading connection with gold-plated
Single coil deck
Comes with 1 glass tube
SS + PC tube which can bring you 2 different looks
Provides 6 size airflow control
U shape surround airflow system
Diameter: 22mm



https://www.2fdeal.com/search/?Keyword=wasp&CateId= Oumier Wasp Nano S Dual-Coil 25mm RDA w/BF Pin
Coupon Code:MAPWASPD

Features
25mm diameter
Dual post expansive building deck
5mm deep juice well
810 drip tip
Superior stainless steel construction
Top secured via flathead screws
PEEK insulator
Dual coil configuration
Double O-Ring top cap connection
Dual Slotted airflow system
Side airflow vent to side of coil
Slotted top cap airflow control
Squonkable BF 510 connection
Classic, Clean, Stylish:
The WASP NANO S RDA shares the same minimalist design, and incorporates improved build deck and bottom feed capabilities. It is a 25mm width RDA, which also measures in at a relatively 30mm in height, from the 510 pin to the stock drip tip.
Dual Coil Configuration:
The simple deck design gives plenty of options for coil installation-catering for dual builds with raised posts to enable the coil legs to be easily trimmed.
Multiple Airflow Options:
Airflow is made up of two big holes positioned near the middle of the WASP NANO S body air gets drawn through the holes and directed upward to the coil. The airflow control system has a huge range of adjustment so you can close it down to almost MTL restriction and open it up to pretty much wide-open airflow.
Deep Juice Well.
5mm capacity spacious juice well with perfect post placement allows for leak free convenient dripping access




https://www.2fdeal.com/search/?Keyword=stratum&CateId=Stratum Balance Style 60W TC 18350/18650 Mod

Features
POM and ss material
Compatiable with 24mm diameter atomzier
Compatiable with 18350 /18650 battery (battery not included)
510 threading connection
Screen: 0.91"
Input Voltage: 3.2V~4.2V
Input Current: 0.5A~30A
Output Power: 1W~60W
Output Voltage: 0.5V~8V
Atomizer Resistance: 0.1ohm~3.0ohm
Quiescent Current: 0uA~20uA
Coil Material Supported: Ni / SS / Ti
Temperature control range: 100'C~315'C / 200'F~600'F
Efficiency: 91%
C: for 18650 battery over 15C only
Construction from PC and Stainless Steel
Compatible with 24mm diameter atomizer
Powered by 1 x 18350 / 18650 battery (battery not included)

Some Yocan fans ask how to clean Yocan Evolve Plus XL, and how to de-clog the airflow or mouthpiece? Read this Ultimate Clean Guideline for Yocan Evolve Plus XL, to clean and maintenance your device regularly in right way.


Unscrew All Parts

First of all, unscrew all parts of Yocan Evolve Plus XL, seperate the following Yocan Evolve Plus XL components:
Mouthpiece
QUAD Coil
Coil cap
Base part, etc.

Soak in ISO, And Wipe It

Excluding the Silicone Jar, and the Evolve Plus Xl battery, soak the above parts in Isopropyl Alcohol for at least one hour.
Then remove and wipe down all surfaces with cotton swabs. Here is detail vape tricks:

Step 1 – Place the parts in a Sealable Plastic Bag with Alcohol.
Step 2 – Add a Teaspoon of Salt. (Option)
Step 3 – Let the parts Soak.
Step 4 – Shake the Bag.
Step 5 – Remove the part from the Bag and Wash.
Step 6 – Let the parts Dry Completely

Then wipe down and dry completely before you use it.

Burn Off Residual ISO

Fully assemble parts and engage device at full activation on MAX temperature level to burn off any residual ISO on remaining parts.

Regular cleaning and maintenance is recommended to avoid clogging and extend the life of your Yocan devices.

If you want to learn more Yocan vape tricks, please visit Yocan help center page.

SMOK Vape Pen V2 Kit

Vape Pen V2 Kit is the latest mechanical mod kit with one button design and portable structure. It contains a 1600mAh battery and a 3ml tank. It is specialized in creating great taste and dense vapor with a mode of mechanical output and 60W max power. It is shaped into a pen and you can carry it anywhere easily. 3 LED indicators will clearly show you the status of device. Adopting adjustable airflow and Vape Pen V2 Meshed Coil, Vape Pen V2 will provide you smooth flavor and satisfying vaping experience.


Details:

1. Adjustable airflow system
2. Portable with easy operation
3. 3 LED indicators show the device status
4. 1600mAh battery capacity
5. 3ml e-juice capacity
6. Wider airflow range, richer vapor effects
7. Adopts Vape Pen V2 Coils
8. One button design
9. Safety protections: Lithium Battery/Atomizer Detection/8S Cut-off/Short Circuit/Low Voltage Protection





CIGPET Capo Box Mod

Capo Mod is a regulated box mod powered by dual 18650 cells. And it is made by environment-friendly PCTJ material, which makes the mod high-quality and safer. In addition, it features a 0.91 inch OLED display and 1-126W adjustable output power. Multiple protections are designed to ensure your safety.


Details:

1. Dual 18650 batteries
2. 1-126W adjustable output
3. Environment-friendly PCTJ material
4. 0.91 inch OLED display screen
5. Micro USB fast charging
6. Safety protections: Overheating/Low Power Alert/Short-circuit/No Atomizer Alert/Low Resistance Alert/High Resistance Alert Protection

My Cuboid 200W Box Mod I ordered came in.

Got it on an 80% closing sale. They threw in some free goodies, such as 3 battery chargers, key chain, Aspire Nautulis X tank (wihout glass), Aspire Cleito Exo tank (brand new).

all great for $35.

Should be able to do some proper vaping soon, as I now have everything.

Got the Cleito Exo just filled up with juice, so I will wait a few hours, and then try DTL vaping for the first time. Says it's rated for 60-100W, so I will start at 60W, and go from there, find the sweet spot for me.

I also have the complete brand new Nautilus X I ordered a few days ago too.





P.S: Can you see my photos? They are sourced from my facebook, I did set the post to public, so hopefully you can see them.

Hello, im a new member, i really want to chat with a certain member but i cant work out how.. Can anybody explain?

Hi ECF members, In this review i take a look at the Zeus Nano Tank from Geekvape. The Zeus Nano Tank was supplied for the purpose of this review by Geekvape.

ZEUS Nano Tank



Introduction

Geekvape in the last 3 years have become best known for their Zeus atomizers and Aegis devices and here we have them meet in the form of coil cross compatibility. The Zeus Nano Tank borrows it's top to bottom airflow system from it's bigger brother the Zeus Sub-ohm tank just on a smaller scale offering a more restrictive vape for lower wattage RDL or loose MTL dependant on airflow setting and installed coil head. The coils get press fitted into the chamber and the top to bottom airflow offers a leak resistant solution.

The Zeus Nano Tank accommodates the G Boost B-series coil heads that are used by the Aegis boost and this cross compatibility of coil heads is something that's both welcomed and we should see more of. Coming in 6 different colour options and with familiar Zeus aesthetics let's give the 22mm in diameter new member of the Zeus family a closer look!

___________________________________________________________________



In The Box



Contents:

1 x Zeus Nano Tank (2ml)(Pre-installed: Geekvape B Series Coil 0.4ohm,25~33W)
1 x Geekvape B Series Coil 0.6ohm,15~25W
1 x Drip tip
1 x Coil tool
1 x User manual
1 x Spare parts pack
1 x Spare glass tube (3.5ml)

___________________________________________________________________



Aesthetics

The Zeus Nano Tank came in cardboard box sample packaging so the retail packaging will differ. I received the Rainbow colour version, the options are Silver, Gunmetal, Blue, Black, Gold or Rainbow.

The build quality and overall look is the same as we have seen with previous Zeus family members with the Nano at 22mm being the most slender of the siblings which also gives it a taller look.

Up top we have a Black 510 Delrin drip tip then a top-cap that tapers and has spaced indented grooves for a good grip. The base section has the same indented grooves and is 22mm at the very base and then it tapers outwards then back inwards making the straight glass approximately 23mm wide. Below the top-cap we have the airflow control ring with short dual airflow slots and "ZEUS" carved into the metal. Looking through the glass at the visible chamber we can see cut-out sections either side that line up with the coils wicking ports and the familiar Zeus logo on both the front and back. Moving to the base we have a Gold plated 510 pin, branding and safety marks!



___________________________________________________________________



Zeus Nano Specs and Features:

Diameter: 22mm
Height: 56.55mm
Tank Capacity: 2ml
Filling Method: Top filling
Airflow: Top to Bottom Airflow Control
Drip Tip Type: 510 Drip Tip
Resistance: 0.6ohm KA1 Mesh Coil - Rated 15-25W;
0.4ohm KA1 Mesh Coil - Rated 25-33W
GV Boost Formula G Coil/B Series Coil
Material: Stainless Steel+Pyrex Glass
The Most Reliable Leakproof tank
Quick-change prebuilt coil system
Thread: 510
Colours: Silver, Gunmetal, Blue, Black, Gold, Rainbow



___________________________________________________________________



What You Receive?

As well as the Zeus Nano Tank with 2ml straight glass you also receive a 3.5ml bubble glass and full set of spare O-rings. You also get one of the boost coil spanners for help with coil removal although i have never found the need to ever use it whichever kit it has been supplied with. Also included are 2 different G-Boost B-Series coil heads, and finally a spare (identical) 510 drip tip.



___________________________________________________________________



It's Various Parts

Up top we have a plain Delrin 510 with a bore suited to a restricted direct lung or loose MTL draw and the spare is identical, at least the spare i received is. We then have the top cap with bayonet fitting that secures to the juice port plate which has attached the double chamber with incorporated airflow system.






On the top of the Chamber and juice port plate section we have an airflow control ring that can be easily removed for cleaning purposes and the glass tube whether it be the pre-installed straight glass or included bubble glass secures really well over an O-ring below the airflow slots and above the chamber. The coil head gets press fitted into the chamber and base section with 510 thread screws on to complete the tank!



___________________________________________________________________



Fitting The Coil Head

The Zeus Nano Tank takes the same Boost coils that fit both the Boost and Boost Plus and you receive both the 0.6ohm and 0.4ohm kanthal mesh coils, the 0.4ohm is rated between 25w and 33w and the 0.6ohm rated between 15w and 25w.





As mentioned the coil head just gets press fitted into the chamber, make sure that the wicking ports line up with the cut-out ports on the chamber so it wicks correctly, then simply screw the tanks base on and you are ready to fill!



___________________________________________________________________



Filling

As mentioned the top-cap has the same bayonet fitting as the other Zeus family members which let's face it who doesn't prefer this method rather than more time consuming threading? So just a quarter turn, if that and the top-cap is off revealing 2 quite narrow kidney shaped juice ports. Although the ports are quite narrow they are within a deep channel so the e-liquid will find it's way into the ports if using bigger nozzles just a little more time consuming but standard gorilla nozzles are fine.





Once filled again it's just the slightest of turns and the top-cap is secured and you are good to go!



___________________________________________________________________



The Airflow

The airflow on the Zeus Nano Tank is the same top to bottom airflow we see on all the Zeus Tanks and the particular design on the Zeus Nano is identical to how it was executed on the Zeus Sub-ohm tank just with smaller airflow inlet slots and narrower cavity.

The airflow enters through the top angled airflow slots, the amount of air can be controlled by adjusting the airflow control ring which as usual on a Zeus tank moves with just the right amount of tolerance. The chamber is double walled with a cavity either side for the airflow to travel down before coming out into the base section through a narrow elongated slit either side. Once the air is in the base section it can enter the air inlets at the base of the coils just as it would with bottom airflow.





Some seem to think that top to bottom airflow can not give good flavour due to the loss of pressure travelling from top to bottom but on the Zeus however the system has been designed they always seem to get the slot, cavity ratio right and many including me find the Zeus family give cracking flavour, whether it's the single coil original, dual coil versions or Sub-ohm Tank!



___________________________________________________________________



Using with the Boost or Boost Plus

As well as utilising the same Boost Coils as the Aegis Boost and Boost Plus Pod Mods when using either device with a 510 adaptor which are available from Geekvape and third party manufacturers the tank makes a good partner for either.

Geekvape did send me the 510 adaptor for the Boost Plus with the Zeus Nano and it clicks in place securely and has no movement whatsoever. I like these 510 adaptors for pod mods as they allow them to be used as a compact out and about standard device. The Zeus Nano fits nicely on top of both the Boost and Boost Plus and with the Boost Plus adaptor which was sent we have a mm either side to play with so tanks up to 26mm will fit without overhang!



___________________________________________________________________



How It Vapes? And Thoughts!

If you think the Zeus Nano tank is just to maybe use up surplus Boost coils you would be very much mistaken as the Boost coils give very good flavour used with the Boost devices but in the Nano whether it is to do with a superior airflow system or metal chamber or combination of both the flavour is serious pinging from both coils in conjunction with a very smooth draw.

The 0.6ohm coil has a narrower bore than the 0.4ohm and wide open gives a restricted direct lung vape which can be closed down for even more restriction and even just open a loose MTL is possible although really it's more suited for RDL but it told me enough that if a MTL boost coil became available the Nano could give satisfactory both medium-loose and loose MTL draws with the airflow just slightly open. The 0.4ohm coil which i preferred at 28W and the airflow two thirds open for the restriction i like gives a semi restricted draw fully open. The 0.6ohm coil i both used at 20w with airflow half open for a very restricted direct lung vape but also closed it down to a 6th open and at just 15w for a reasonable loose MTL vape.

When it comes to stock coil tanks there seems a lot of both MTL and high wattage Sub-ohm tanks but this covers the more neglected area which is how a lot of vapers prefer to vape which is a low wattage restricted direct lung vape many of whom when the mood takes also like a loose MTL. My first con will be only 2 coils are still available as far as i am aware and i would like to see a dedicated MTL coil to show the full versatility the Nano could offer. My only other con is those narrow juice ports which are set within a deep channel so if the e-liquid struggles to go through the port from the nozzle it's not messy just you have to wait as it finds it's way through the juice port.

With the 2ml straight glass i found myself filling quite often but that was my choice as i could of fitted the bubble glass so not an issue and i love the bayonet fitting all the Zeus range employ. The coils can get fitted and removed in an instant and although it's a nice touch receiving a tool to help it really isn't needed, also as long as the juice level falls below the chamber cut-outs when the tank is turned upside down the coil can be swapped out with the juice in the tank!

Also the fact the Zeus Nano uses the Boost coils is a big pro as cross compatibility is something we need to see more of and also the Zeus Nano looks great on top either the Boost or Boost Plus with the use of a 510 adaptor!



___________________________________________________________________



Likes

Very good build quality
6 Colour options
Bayonet top-cap fitting
Comes with 2 different mesh coil heads
Utilises Boost Coils (cross compatibility)
3.5ml Bubble glass included
Fits good on top either Boost or Boost Plus with 510 adaptor
Very good low wattage RDL tank on it's own merits
Very loose MTL possible with 0.6ohm coil
Spare drip tip (wish it was a different option to pre-installed tip)
Very smooth draw
Flavour pinging from both coils
Included coil removal tool (not really needed)
Top to bottom leak resistant adjustable airflow
Press fitted coil heads (quick to install and remove)


Cons

Narrow juice ports
Only two available coils
Only a very loose MTL possible with 0.6ohm coil
No dedicated MTL coil to fully utilise the Nano's potential
Both supplied drip tips identical (a different option would be preferable)



I would once again like to thank Geekvape for supplying the Zeus Nano Tank for the purpose of this review, thanks for reading and stay safe!

ZEUS Nano Tank

___________________________________________________________________

I am selling my entire collection of vape gear, but I wanted to sell these separately first.

1.) Bennett Tool Customs SqArias XL - 21700 mechanical squonk full green stabwood - $330

2.) Bennett Tool Customs SqArias V2 - 18650 mechanical squonk - transparent light blue acrylic with teal anodized aluminum plates - $280

3.) Infinite Modz Hype - 18350 mechanical mod - teal and brown ring - $100

Paypal only. PM me if interested.

The Oumier Wasp Nano S is the next logical progression of the old Wasp Nano single coil RDA. The Nano S is a dual coiler with a very interesting deck and airflow layout compared to other dual coil drippers on the market.

═╣ Oumier Wasp Nano S ╠═

00:00 ◄ Intro and specs
02:00 ◄ Close up and build & wicking
15:58 ◄ Vape
17:26 ◄ Thoughts


Login to view embedded media

I've tried a few av theese juices and haven't found one that doesn't taste bad, burnt, alcohol-ish or just wrong.

Can't figure it out. I would really like to find a dessert juice that really tastes like its supposed to.

I looked around for an "award winning" juice and found Vapetasia's Killer Kustard. Tons and tons of top reviews so i figured so many people can't be wrong.

Well I got it, tried it and it tasted like straight upp a*s. I've tried some others as well but I get ruined by spending cash on juices that I have to throw in the garbage.

I've tried them on different coils, tanks and rda's. Steeping and differens watts or degrees in TC mode.

(this post is not related to my recent post about my change in taste and smell, this issue goes way back)

Can you guys please give me some advice and tips on your favorite juices thats dessert, breakfast amd pastry. I would really appreciate it

Please use code get20more at checkout for your discount!

100ml+ For $9.52- (at least 100ml of ejuice) combination from 100ml and 120ml bottles

Keep it 100 bottles from $9.52

Nude 240 (2x120) only $13.60

Hi peeps
Question!!!
I build coils and the resistance is never same as the Vape tool app or steam engine site...I am not talking about very small difference but like my coil reads 0.9ohm on one mod and 0.86 at another mod I have, but the vape tool and steam engine shows same, that it should be 0.74ohms
It's like one wrap difference when I try match the resistance
The vape tool shows a way to count the wraps

But even with that way to measure still I don't get correct resistance....
I also checked the legs of the coil but seems they can't make that difference anyway.....is it possible that has to do with the coils material??? In my case is kanthal a1 or however it's called hahaha but I mean maybe it's not the same quality ?

Anyone else have same difference??? It's not I get crazy about it cause I guess not matter much but just curious why....

Hiya,

The newest dual battery mod by Smok the Rigel. It is a kit that comes with the TFV9 which I reviewed with the Scar-18 kit.

What makes this box special is its weight and size, it is both light and small for a dual battery mod.





Specifications:

SMOK RIGEL 230W Box Mod Features:
Dimensions - 88mm by 44mm by 28.8mm
Dual High-Amp 18650 Batteries - Not Included
Wattage Output Range: 1-230W
Voltage Output Range: 1-8V
Resistance Range: 0.1-2.5ohms
Firing Speed: 0.001s
Zinc-Alloy Chassis Construction
Soft-Rubberized Coating
Single Firing Button
0.96" TFT Display Screen
Two Adjustment Buttons
Magnetic Battery Back Cover
Intelligent Atomizer Recognition
Puff Monitoring System
8S Cut-Off Protection
Short-Circuit Protection
Over-Heating Protection
Low Battery Warning
Threaded 510 Connection
Type-C USB Port
Available in Black Red, Silver, Black Blue, Black, Black Green

SMOK TFV9 Sub-Ohm Tank Features:
28mm Diameter
6.5mL Tank Capacity
Pyrex Glass Reinforcement
Superior 304 Stainless Steel Chassis Construction
Sliding Top Fill System - Single Fill Port
SMOK TFV9 Coil Series
0.15ohm V9 Meshed Coil - rated for 40-90W
Press Fit Coil Installation
Dual Slotted Airflow Control Ring
510 Connection









Packaging:

1x RIGEL Mod
1x TFV9 Tank
2x 0.15ohm V9 Meshed Coil
1x Replacement Glass Tube
1x Type-C Cable
1x User Manual



Review:

Indeed it is small, the smallest dual battery mod I have ever owned. Also because of the box being made fully out of plastic it is extremely light. How light? With batteries (190g) inserted it was just 10g heavier than the Geekvape Aegis X without batteries. See below a comparison with the Aegis X.



Plastic sounds cheap, I know, but the technology used is key here. It has the same kind of pattern as the Vaporesso Gen (one of my favs) giving it a grippy, almost silicone like, and solid feel.

Like the looks of this device, the carbon panels on the front look cool. I would have preferred the black frame around the screen and panels to be of the exact same design as the rest of the device. The tank is as well silver but does not have the same kind of pattern as the mod which makes it not a perfect match.









Had to get used to the irregular shape of the device, in the beginning it did not feel very comfortable. I found a way of holding it and I got used to it. For me its a thumb fire device only, as index finger feels a bit akward. Everyone has their own way of holding devices, I guess that with this device everyone would find a way for a comfortable hold.

Pity the 510 connector is not centralized, which limits to 28mm without overhang. If it would be centralized it would nicely fit a 30mm tank, for example one of my favorite tanks the Aromamizer plus V2.

Battery door can be easily pulled with the slot on the bottom if the device. The door is held together strongly by magnets and there is no play to it, stays in place very well.



Bright and large enough screen that contains all relevant information. Like the fact here is battery indication in % for both batteries. You can switch between 6 themes (colors) by simultaneously holding fire and plus.



All buttons are very clicky and are not wiggling. Fire button is nice and large, hard to miss. The downside of these buttons is that there is not so much you can do with it.

Very limited in functionalities, it only supports VW. Other things you can do is reset puff counter, change theme, lock wattage and lock fire button, that's it. I do like that you can choose to either lock wattage or fire button. For me the limited functionalities are not a very big deal as I use VW in 99% of the cases anyway, but I can imagine it is a no for some vapers.

It fires up quick and the fire button is very reactive, always good. It has USB-C, which for me on an external battery mod is not very important as I charge my batteries outside of the mod.

TFV9 tank is what you get in the kit, and I really like this tank.





It has a quite unique fill system by pulling the top cap up and sliding the top cap to the side and away from the tank. It feels a bit fragile while opening and closing, I didn’t have any issues with it. Its child proof system is always a good thing as I have a kid.



Because of the system the rubber plug gets a bit deformed overtime, that is why SMOK included another one in case it needs replacement. Large enough fill hole for easy filling.

Coils are screwed into the base, a system which I overall am not a fan off, I am more a fan of plug systems, but then again, those systems don’t use large high wattage coils. Screwing coils on and off is smooth.

Airflow has one large sleeve, but the base of the tank has two sleeves, probably to make the base more solid. It is quite loud this airflow, no matter if its fully open or almost closed, it also whistles when the airflow is about 80% closed, pity.

If it’s about flavor and performance there is nothing to complain. These new Kanthal mesh coils deliver outstanding flavor and have a proper lifespan. Been using the initial coil for 2 weeks now and it still performs well. It says the coils are recommended from 40-90 Watts, but I have a feeling that above 80W they are having trouble keeping up and providing a dryer hit. I liked vaping these coils most at 75W, at which it has no issues with chain vaping.



Not sure about the coil options, on the SMOK website I can only find this one V9 Meshed coil that is compatible.

Conclusion

A very light-weight box mod with a well performing tank. It is a pleasure vaping on this kit, no trouble with it really. It feels nice in the hand and is small for a dual 18650 mod.

This kit is for those that are looking for a light-weight box-mod and don’t care about functionalities, such at TC, as this box is very limited. For wattage vaping it does the job well.

You have to be careful with the coil as I feel it can’t keep up with 80+ watts.

Its shape is something I had to get used to, but it gets comfortable overtime.

For 60$ you will be able to pick up this kit on various websites.

Special thanks to @SMOK_Sophia for sending me this kit.

Thank you,

Sjoerd

Hiya,

The newest dual battery mod by Smok the Rigel. It is a kit that comes with the TFV9 which I reviewed with the Scar-18 kit.

What makes this box special is its weight and size, it is both light and small for a dual battery mod.





Specifications:

SMOK RIGEL 230W Box Mod Features:
Dimensions - 88mm by 44mm by 28.8mm
Dual High-Amp 18650 Batteries - Not Included
Wattage Output Range: 1-230W
Voltage Output Range: 1-8V
Resistance Range: 0.1-2.5ohms
Firing Speed: 0.001s
Zinc-Alloy Chassis Construction
Soft-Rubberized Coating
Single Firing Button
0.96" TFT Display Screen
Two Adjustment Buttons
Magnetic Battery Back Cover
Intelligent Atomizer Recognition
Puff Monitoring System
8S Cut-Off Protection
Short-Circuit Protection
Over-Heating Protection
Low Battery Warning
Threaded 510 Connection
Type-C USB Port
Available in Black Red, Silver, Black Blue, Black, Black Green

SMOK TFV9 Sub-Ohm Tank Features:
28mm Diameter
6.5mL Tank Capacity
Pyrex Glass Reinforcement
Superior 304 Stainless Steel Chassis Construction
Sliding Top Fill System - Single Fill Port
SMOK TFV9 Coil Series
0.15ohm V9 Meshed Coil - rated for 40-90W
Press Fit Coil Installation
Dual Slotted Airflow Control Ring
510 Connection









Packaging:

1x RIGEL Mod
1x TFV9 Tank
2x 0.15ohm V9 Meshed Coil
1x Replacement Glass Tube
1x Type-C Cable
1x User Manual



Review:

Indeed it is small, the smallest dual battery mod I have ever owned. Also because of the box being made fully out of plastic it is extremely light. How light? With batteries (190g) inserted it was just 10g heavier than the Geekvape Aegis X without batteries. See below a comparison with the Aegis X.



Plastic sounds cheap, I know, but the technology used is key here. It has the same kind of pattern as the Vaporesso Gen (one of my favs) giving it a grippy, almost silicone like, and solid feel.

Like the looks of this device, the carbon panels on the front look cool. I would have preferred the black frame around the screen and panels to be of the exact same design as the rest of the device. The tank is as well silver but does not have the same kind of pattern as the mod which makes it not a perfect match.









Had to get used to the irregular shape of the device, in the beginning it did not feel very comfortable. I found a way of holding it and I got used to it. For me its a thumb fire device only, as index finger feels a bit akward. Everyone has their own way of holding devices, I guess that with this device everyone would find a way for a comfortable hold.

Pity the 510 connector is not centralized, which limits to 28mm without overhang. If it would be centralized it would nicely fit a 30mm tank, for example one of my favorite tanks the Aromamizer plus V2.

Battery door can be easily pulled with the slot on the bottom if the device. The door is held together strongly by magnets and there is no play to it, stays in place very well.



Bright and large enough screen that contains all relevant information. Like the fact here is battery indication in % for both batteries. You can switch between 6 themes (colors) by simultaneously holding fire and plus.



All buttons are very clicky and are not wiggling. Fire button is nice and large, hard to miss. The downside of these buttons is that there is not so much you can do with it.

Very limited in functionalities, it only supports VW. Other things you can do is reset puff counter, change theme, lock wattage and lock fire button, that's it. I do like that you can choose to either lock wattage or fire button. For me the limited functionalities are not a very big deal as I use VW in 99% of the cases anyway, but I can imagine it is a no for some vapers.

It fires up quick and the fire button is very reactive, always good. It has USB-C, which for me on an external battery mod is not very important as I charge my batteries outside of the mod.

TFV9 tank is what you get in the kit, and I really like this tank.





It has a quite unique fill system by pulling the top cap up and sliding the top cap to the side and away from the tank. It feels a bit fragile while opening and closing, I didn’t have any issues with it. Its child proof system is always a good thing as I have a kid.



Because of the system the rubber plug gets a bit deformed overtime, that is why SMOK included another one in case it needs replacement. Large enough fill hole for easy filling.

Coils are screwed into the base, a system which I overall am not a fan off, I am more a fan of plug systems, but then again, those systems don’t use large high wattage coils. Screwing coils on and off is smooth.

Airflow has one large sleeve, but the base of the tank has two sleeves, probably to make the base more solid. It is quite loud this airflow, no matter if its fully open or almost closed, it also whistles when the airflow is about 80% closed, pity.

If it’s about flavor and performance there is nothing to complain. These new Kanthal mesh coils deliver outstanding flavor and have a proper lifespan. Been using the initial coil for 2 weeks now and it still performs well. It says the coils are recommended from 40-90 Watts, but I have a feeling that above 80W they are having trouble keeping up and providing a dryer hit. I liked vaping these coils most at 75W, at which it has no issues with chain vaping.



Not sure about the coil options, on the SMOK website I can only find this one V9 Meshed coil that is compatible.

Conclusion

A very light-weight box mod with a well performing tank. It is a pleasure vaping on this kit, no trouble with it really. It feels nice in the hand and is small for a dual 18650 mod.

This kit is for those that are looking for a light-weight box-mod and don’t care about functionalities, such at TC, as this box is very limited. For wattage vaping it does the job well.

You have to be careful with the coil as I feel it can’t keep up with 80+ watts.

Its shape is something I had to get used to, but it gets comfortable overtime.

For 60$ you will be able to pick up this kit on various websites.

Special thanks to @SMOK_Sophia for sending me this kit.

Thank you,

Sjoerd

Hey I'm new in the forum. I've been vaping since the dawn of times. I'm not an expert I can help you with almost any question besides high-end devices. But more important I'm looking to learn the latest news all around vaping from you. Thanks. Sorry for my bad English