The review today will be for the AVP Cube, sent to me by Aspire. There is a lot to like about this nice-looking device and I know it will please MTL vapers, I will explain more later. As always, I am happy to share relevant information and my personal opinions with our vaping community.

First some information taken from Aspire website. Picture attached.

Here is the link in case you want to know more

Aspire AVP-CUBE - Aspire® Official Site

Inside the Box

• Aspire AVP-Cube device (1300 mAh)
• Pod (3.5 ml)
• Mesh Coil 0.65Ω
• Standard Coil 1.15Ω
• USB Type C Cable
• User manual

Device

The colour of my AVP Cube is navy blue, made of aluminium alloy and PCTG for the pod. As the name suggested the shape of this device is a cube.



At the front it has a very comfortable fire button, the shape is square with rounded edges, slightly raised and has texture to it, and Aspire branding at the bottom. The green arrow is show the white dot which will indicate which airflow is being used, more of this a bit later on, the next side it has the USB type C for fast charging at 2A, on the next side at the bottom AVP-CUBE and the last side is clear. It good to see at the bottom of the device vents holes for the internal battery (1300 mAh).


On this device they provided four different airflow options, one of each side of the device. It ranges from 0 holes, 2 holes, 4 holes and 8 holes. To select or change the airflow the user just needs to rotate the pod matching the side of the pod with the white dot with the airflow desired.


The airflow ranges from a very tight MTL with some options to make it slightly lesser tight. Especially when using the standard 1.15Ω coil. When using the Mesh 0.65Ω coil one can achieve a very restricted direct lung with 4 holes but mostly with 8 holes airflow selected. Worth mentioning that 6 holes would have been a good addition to give RDL and loose MTL vapers a bit more choices.

To on and off the mod press fire button five times. When using the standard 1.15Ω coil you can select the wattage by pressing the fire button twice, red light 10W, blue light 12W, green light 14W and white light 16W. When using the Mesh 0.65Ω coil the device will work on bypass mode so there is no wattage to be selected.


When firing the device, the LED light will light up, colours will indicate battery level, red (60-100%), then blue (30-60%) and finally red (under 30%). It has a 1300 mAh internal battery that can be charge using the USB C provided (2A Charge), it charges in around an hour.

This is a very solid device, nice feel on the hand with the cube shape and fires instantly.


Pod

The pod connects to the device top metal inner ring by two strong magnets. The pod will not come off by itself. It also used standard 510 drip tip so it can be changed to your preferred drip tip which is a big plus in my opinion.

The pod can hold 3.5 ml of juice (2ml for TDP version), it is lightly tinted, is quite easy to see the liquid level. It has bottom fill by using a rubber plug. If you fill with bigger bottles (100 ml) is better to do it slowly.

The coils provided in the box are:


Always remember to prime the coils, press fit the coil in the pod, fill with juice of your choice and let it sit for at least 10 minutes. Just to make sure the coil is fully saturated.

I started with the standard 1.15Ω coil (white) this is in my opinion a true MTL coil not quite my preferred style, but I do think MTL vapers will be happy.

Then I tried the Mesh 0.65Ω coil (light blue), for me depending on airflow selected MTL but I can happily do a very restricted DL with 4 holes, but my preferred airflow setting is 8 holes. Both coils give excellent flavour.

In my opinion this device does MTL very well with the coils available and different airflow options. When it comes to RDL vapers only the Mesh 0.65Ω coil will work from 4 holes to mainly 8 holes selected. I wish there could have been a 6 holes option for RDL vapers and those who like a loose MTL.

Positives

• On point flavour.
• Excellent construction and nice finish. It feels very solid.
• Comfortable to hold and can stand by itself.
• Replaceable coils just press to fit and ready to use.
• No need to replace the pod.
• Can use any 510 drip tip.
• Strong magnets.
• Fast firing and charging.
• Very easy to use.
• No leaks.
• Very suitable for MTL vapers

Wishlist

• More airflow options for the Mesh 0.65Ω coil for the RDL vapers.

In conclusion, I would really recommend the Aspire AVP-CUBE without a doubt. It will be an excellent choice for MTL vapers and those who like a very restricted DL. Solid device and it does look nice. Relatively small carry around device. I am liking mine with 8 holes airflow selected and the flavour is on point. Overall a great pod system.

I will like to thank @Aspire_Tina and Aspire for providing the APV-CUBE for review.

The review today will be for the AVP Cube, sent to me by Aspire. There is a lot to like about this nice-looking device and I know it will please MTL vapers, I will explain more later. As always, I am happy to share relevant information and my personal opinions with our vaping community.

First some information taken from Aspire website. Picture attached.

Here is the link in case you want to know more

Aspire AVP-CUBE - Aspire® Official Site

Inside the Box

• Aspire AVP-Cube device (1300 mAh)
• Pod (3.5 ml)
• Mesh Coil 0.65Ω
• Standard Coil 1.15Ω
• USB Type C Cable
• User manual

Device

The colour of my AVP Cube is navy blue, made of aluminium alloy and PCTG for the pod. As the name suggested the shape of this device is a cube.



At the front it has a very comfortable fire button, the shape is square with rounded edges, slightly raised and has texture to it, and Aspire branding at the bottom. The green arrow is show the white dot which will indicate which airflow is being used, more of this a bit later on, the next side it has the USB type C for fast charging at 2A, on the next side at the bottom AVP-CUBE and the last side is clear. It good to see at the bottom of the device vents holes for the internal battery (1300 mAh).


On this device they provided four different airflow options, one of each side of the device. It ranges from 0 holes, 2 holes, 4 holes and 8 holes. To select or change the airflow the user just needs to rotate the pod matching the side of the pod with the white dot with the airflow desired.


The airflow ranges from a very tight MTL with some options to make it slightly lesser tight. Especially when using the standard 1.15Ω coil. When using the Mesh 0.65Ω coil one can achieve a very restricted direct lung with 4 holes but mostly with 8 holes airflow selected. Worth mentioning that 6 holes would have been a good addition to give RDL and loose MTL vapers a bit more choices.

To on and off the mod press fire button five times. When using the standard 1.15Ω coil you can select the wattage by pressing the fire button twice, red light 10W, blue light 12W, green light 14W and white light 16W. When using the Mesh 0.65Ω coil the device will work on bypass mode so there is no wattage to be selected.


When firing the device, the LED light will light up, colours will indicate battery level, red (60-100%), then blue (30-60%) and finally red (under 30%). It has a 1300 mAh internal battery that can be charge using the USB C provided (2A Charge), it charges in around an hour.

This is a very solid device, nice feel on the hand with the cube shape and fires instantly.

Pod

The pod connects to the device top metal inner ring by two strong magnets. The pod will not come off by itself. It also used standard 510 drip tip so it can be changed to your preferred drip tip which is a big plus in my opinion.

The pod can hold 3.5 ml of juice (2ml for TDP version), it is lightly tinted, is quite easy to see the liquid level. It has bottom fill by using a rubber plug. If you fill with bigger bottles (100 ml) is better to do it slowly.


The coils provided in the box are:


Always remember to prime the coils, press fit the coil in the pod, fill with juice of your choice and let it sit for at least 10 minutes. Just to make sure the coil is fully saturated.

I started with the standard 1.15Ω coil (white) this is in my opinion a true MTL coil not quite my preferred style, but I do think MTL vapers will be happy.

Then I tried the Mesh 0.65Ω coil (light blue), for me depending on airflow selected MTL but I can happily do a very restricted DL with 4 holes, but my preferred airflow setting is 8 holes. Both coils give excellent flavour.

In my opinion this device does MTL very well with the coils available and different airflow options. When it comes to RDL vapers only the Mesh 0.65Ω coil will work from 4 holes to mainly 8 holes selected. I wish there could have been a 6 holes option for RDL vapers and those who like a loose MTL.

Positives

• On point flavour.
• Excellent construction and nice finish. It feels very solid.
• Comfortable to hold and can stand by itself.
• Replaceable coils just press to fit and ready to use.
• No need to replace the pod.
• Can use any 510 drip tip.
• Strong magnets.
• Fast firing and charging.
• Very easy to use.
• No leaks.
• Very suitable for MTL vapers

Wishlist

• More airflow options for the Mesh 0.65Ω coil for the RDL vapers.

In conclusion, I would really recommend the Aspire AVP-CUBE without a doubt. It will be an excellent choice for MTL vapers and those who like a very restricted DL. Solid device and it does look nice. Relatively small carry around device. I am liking mine with 8 holes airflow selected and the flavour is on point. Overall a great pod system.

I will like to thank @Aspire_Tina and Aspire for providing the APV-CUBE for review.

I'm nterested in what other vapers are using in their daily rotation.

Since we already have the long running Squonk Porn! thread, this isn't a picture thread. If you want to show off your mods, post a pic in Squonk Porn thread.



My favourite setups are 2 Asmodus Pumper 18s, A Vandy Vape Pulse v2 and and a mech dotSquonk. All four have Axial RDAs on top

Hi ECF members, In this review i take a look at the Anani V2 MTL RTA from Asmodus. The asMODus Anani V2 MTL RTA was supplied for the purpose of this review by Ella from Sourcemore.

https://www.sourcemore.com/asmodus-anani...l-rta.html



Introduction

Asmodus are an American vaping company manufacturing out of China and have released many popular products most notably their Minikin range of devices and devices with stabwood finishes!

Here we have an upgraded version of their budget MTL RTA the Anani. The Anani V2 is smaller than the original being 22mm at it's base and has added adjustable airflow as well as coming with an extra drip-tip and 2 different pre-wound coils. With all the quality MTL RTA's that we have seen over the past 12 months let's see how the second rendition of the Anani shapes up!

___________________________________________________________________



In The Box



Contents:

1x Anani V2 MTL RTA
1x Kanthal A1 fused clapton 0.6
1x Kanthal A1 28GA 1.0
1x Phillips screwdriver
1x Spare Parts pack
1x User Manual



___________________________________________________________________



Aesthetics

The Anani V2 has a unique futuristic look which is going to divide opinion and possibly give most a nightmare when it comes to what to match it up with. I am all for unique looking original products when it comes to aesthetics but even i am a bit undecided about this, not sure i really like it!!! It comes in the Asmosdus customary cannister style packaging and a Silver/Grey sticker confirmed i had received the Blasted Stainless Steel version which is more a light Grey than Silver, the options are Black, Gold, Blasted Stainless Steel or Brushed Stainless Steel. The V2 does look taller than the original but that's just an illusion due to the V2 only being 22mm at the base giving it a slightly slimmer appearance!

We have a thick base section with heavy knurling before the bottom of the chamber section tapers out severely giving it a unique look. The two tone Ultem top cap then sits sealed with an o-ring on the bottom of the chamber section. The two tones are achieved by the main section of the Ultem cap being unpolished while the top is highly polished! We then have a section which matches the base of the chamber which acts as a base for your drip-tip to fit (it's a standard 510 fitting) which just adds to the funky look! Pre-installed is a rather nice looking short profile Ultem 510 drip-tip.

Moving back to the base we have a short airflow slot which can be lined up with a single hole or slot then moving to the underneath of the base we have printed branding and safety stamps. Finally the 510 positive pin barely protrudes so please avoid using this RTA on an unregulated device!



___________________________________________________________________



Anani MTL RTA Specs and Features:

22mm in diameter
24.5mm outer diameter
Capacity: 2ml
Adjustable airflow
Premium stainless steel & impact/heat resistant Ultem construction
Easy to build two post build deck
Single coil
Compatible with 510 sized drip tips
Top-fill
Thread: 510
Colours: Black, Gold, Blasted Stainless Steel, Brushed Stainless Steel



___________________________________________________________________



What You Receive?

As well as the Anani V2 with pre-installed Ultem drip tip and manual you also receive the usual goodies. You get spare O-rings and deck screws and the customary useless Blue screwdriver for the useless Blue screwdriver collection! You also receive an alternative long MTL delrin 510 drip tip and 2 different pre-wound coils with full specs given.



You get a Kanthal round wire 28ga 1.0ohm and a Kanthal fused clapton 2x30g/40g 0.6ohm, both have a 2.5ID.

___________________________________________________________________



It's Various Parts



Up top we start with that futuristic section with 510 drip tip fitting, pre-installed is a short profile Ultem drip tip which actually looks nice but i found my lips were touching the section below which was uncomfortable so switched for the long MTL delrin drip tip which was much better but made the RTA look even funkier!



The section which accommodates your 510 drip-tip also unscrews to reveal 3 fill port holes rather than slots. Looking at them although obviously air can escape from the holes not being occupied by your nozzle it does look like filling will need to be done very carefully else it could get messy. Fair enough you can't use droppers or thick nozzles but standard gorilla nozzles are fine. The holes are actually slanted and filling surprised me as it could be done quickly and mess free, much better than it looks!



The base section with deck unscrews from the chamber and then the chimney which is part of the chamber section can get unscrewed from the top of the Ultem cap. The chamber has a short chimney section with very narrow bore and looking at why this also has a protruding base section as well as standard chamber we can see 3 slots which will allow e-liquid to cascade down to the base to feed the wicking channels! The threading and machining in general is very good and as you can see from the pictures plenty of substantial O-rings keeps the RTA well sealed but i will point out when unscrewing or screwing back in place the base section with deck it gives an annoying squeak, the threading could be better!



___________________________________________________________________



The Airflow

Looking at the deck you can see a ring of 8 tiny holes plus a central hole, it could be described as a shower head. Your coil will be positioned directly above this shower head which is fed by air from the side of the base. On the side of the base we have both a 1mm hole and then a short slot, the airflow control ring then has a short slot that matches the slot on the base section.

You can line the slot up with the 1mm hole for it's tightest draw or can move the AFC so the hole is still exposed but so is the very outside of the slot essentially given the equivalent of two 1mm holes. You can move the AFC further to line up with the slot to give a very loose MTL draw! Looking inside the chamber you can see it's quite a small area and has a conical ceiling so it will give a reduced area to go with the narrow bore short chimney!



___________________________________________________________________



The Deck And Build

I need to add this section to up the content but kind of feel i will be offending people as this is so easy to build and wick you can't go wrong and it also doesn't need explaining. But at the risk of offending people (i apologise in advance) and just in case some readers are completely new to building i will go through it.

The deck has two posts facing each other and your coil leads just get slid in from the sides where a lip on each post stops them popping out while securing from above via the philips grub screws. So once your leads are slid into the terminals just hold the coil over the "shower head" airflow outlet and tighten down before adjusting the position of your coil if needed with a coiling rod or fit for purpose tool. Then snip your access leads as close to the posts as possible before checking the screws are still nice and tight. Then just give your coil a low wattage pulse and strum any hotspots to eradicate although i used both coils and had no hotspots whatsoever, nice mtl coils!



Wicking is just as easy, you have a channel each side for each end of your cotton to rest in which have 2 small holes on the bottom to feed your cotton with juice. Just cut your cotton bowtie style and just gently rest your cotton ends into the channels and that's it!



___________________________________________________________________



How It Vapes? And Thoughts!

I have always liked Asmodus products but the Anani V2 is a mixed bag and really depends if it falls in your wheelhouse or not. The flavour is up there with the other quality MTL RTA's of late and that "shower head" airflow outlet underneath the coil makes this a silky smooth vape but airflow versatility let's it down!

Having adjustable airflow is an upgrade from version 1 but when we see most MTL RTA's coming with numerous inserts as well as a choice of 5 or 6 different sized holes on the airflow ring sometimes even being followed by a slot so you can have 1,2,3 or however many holes open as you like then the adjustable airflow on the Anani V2 is very limited. I do rate MTL RTA's that go down to a very tight draw as a good MTL tank should cover the full MTL draw spectrum however i personally don't like a tight draw but more a mid to loose draw and the Anani V2 gives me that draw on the single hole which is it's tightest setting so those that say this gives a tight draw i have to disagree with because this is a mid to loose MTL at it's tightest and then moves to a loose followed by a very loose MTL with the slot. For those that have used the Wotofo Cog then the draw spectrum is the same, similar flavour but the Anani V2 is smoother!

Other things to point out is although the machining and threading of the top section and where the chimney screws to the cap is all spot on the threading where the base screws on to the chamber isn't very smooth and is squeaky! Whether i like the looks or not is subjective and will divide opinion although i do think the Ultem drip tip is nice looking but not very comfortable, the longer delrin drip tip is much better but as already mentioned looks even funkier with the look of the tank! The airflow control ring moves with a nice tolerance when not attached to a device but is difficult to adjust when on a device! The final pro for the Anani V2 is just how simple the build is making this a good choice for the first time builder!



___________________________________________________________________



Likes

Unique looking (pro for some but also see cons)
4 Colour options
Standard 510 drip-tip fitting (can use your own)
Alternative drip-tip included
Top-fill (works much better than it looks)
Adjustable airflow (upgrade, but limited)
2 different pre-wound coils included with full specs given
Very smooth draw
Very good flavour (with both supplied coils)
Very easy to build
Suitable for first time builder


Cons

Very unique Aesthetically (will be a con or pro subjective to the individual)
Pre-installed Ultem drip tip not comfortable
Airflow adjustment limited (medium loose through to very loose MTL)
Hard to adjust airflow with RTA on device
Base threading not smooth (gives an irritating squeak)

I would once again like to thank Ella from Sourcemore for supplying the asMODus Anani V2 MTL RTA, thanks for reading and stay safe!

https://www.sourcemore.com/asmodus-anani...l-rta.html

$19.99 asMODus Anani V2 MTL RTA
Code: ANANI

Disclaimer: I am not affiliated with Sourcemore or benefit in any way from the use of the above code but was asked if i would include it in my content!

___________________________________________________________________

The ZQ Essent is ZQs entry into the single battery mod market which is now starting to gain more popularity due to the rise in MTL tanks which don't need a lot of power that dual battery mods make available.

═╣ ZQ Essent ╠═

00:00 ◄ Intro and specs
01:35 ◄ Close up
08:45 ◄ Temp Control & Wattage Vape
12:16 ◄ Thoughts


Login to view embedded media

hi,
I wanted to share the news
My company from italy was developing a pod system style e-cigarette in 2013, but the project was never realized

other details
Volari V: La Sigaretta Elettronica del passato che viene dal futuro

Is the admin or any of the mods familiar with this site and it's services? I used it when I was a mod on my webhosts' forum. The forum doesn't exist anymore, so I don't use it anymore, but I did use it for a while on my own websites' contact page, when I had a form on that page.
Stop Forum Spam

I also installed this program on my PC and used it in conjunction with SFS.
Gunners Software - Forum Spam List Checker - Info Tab

Hi,

I just picked up a 2nd hand Hastur, mainly because I broke both the glass tanks of my old one. This has been my favourite tank for over a year now and I'm not even looking into buying anything else at the moment. However I cannot get the new one to fire, well it does fire a couple off times after installing a new coil and then I just get "coil not found" messages on my mods. The original one I have works fine and I've compared both side by side and nothing seems off in the new one. Any ideas?

The Rincoe Jellybox 228W vape box mod can provide a variety of sub-ohm experience and high power output. Rincoe Jellybox 228W vape box mod uses a transparent PC shell and a zinc alloy frame to make the entire mod highlight the visual beauty. The inside of the mod and the battery packaging can be seen directly from the outside. The innovative design of Jellybox makes it unique. The body size is compact while providing a comfortable grip. The complete control panel has a round fire button, a display screen, and a pair of adjustment buttons. The mod runs on two 18650 batteries (not included) and has an impressive maximum power output of 228W. To access the battery chamber, simply press and lift open the cap on the bottom of the device. And the Jellybox mod implements 5V / 2A quick-charging via the Type-C USB port, so you can spend less time charging. There are 6 LED lights on both sides of the transparent panel of Jellybox, the color of the lights can be changed by changing the UI settings. To turn off the LED light, just press the fire button and the right button together in VW mode.



The Rincoe Jellybox 228W Jelltank Kit is combined with Jellybox 228W Mod and Jellytank.

The Rincoe Jellytank is an adjustable translucent tank with a detachable threaded 510 connection. The Jellytank holds 4.8ml capacity and is made of environmentally friendly food-grade PCTG plastic, which has an excellent vaping experience. The built-in proprietary drip tip provides simplicity and comfort. The bottom of the pod has a filling port, unscrew the bottom base, open the white silicone case to fill the e-juice. There is a narrow slot on the thread base to control the incoming airflow. Jellytank features mesh coil 0.15ohm makes the clear flavor and dense cloud.



More details of Rincoe Jellybox >> https://www.3fvape.com/47522-.html

More details of Rincoe Jellbox Jellytank kit >> https://www.3fvape.com/47515-.html

The Rincoe Jellybox Mini Box Mod is made of durable zinc alloy & high end PC, which is sturdy and anti-drop. The whole machine adopts a unique transparent design from the tank to mod, providing stunning aesthetics and strong visual impact. This compact, sleek, user-friendly device is powered by 1 x 18650 / 20700 / 21700 battery (not included). Its very easy to remove and install batteries and the doors all fit very stable. Fast charging through the Type-C port under the side. The Jellybox Mini mod has a proprietary RINCOE board on the internal side, which not only provides a variety of security protections but also provides a variety of modes for you to customize the performance of the device. Variable Wattage mode allows you to select precise power output, maximum support 80W. The temperature control suite can be used for more custom coil types, like Stainless Steel and Titanium. Jellybox also features 6 LED lights and shines through into the full device lighting it up.



The Rincoe Jellybox Mini 80W Jelltank Kit is combined with Jellybox Mini Mod and Jellytank.

The Rincoe Jellytank is an adjustable translucent tank with a detachable threaded 510 connection. The Jellytank holds 4.8ml capacity and is made of environmentally friendly food-grade PCTG plastic, which has an excellent vaping experience. The built-in proprietary drip tip provides simplicity and comfort. The bottom of the pod has a filling port, unscrew the bottom base, open the white silicone case to fill the e-juice. There is a narrow slot on the thread base to control the incoming airflow. Jellytank features mesh coil 0.15ohm makes the clear flavor and dense cloud.





More Details for Jellybox Mini >> https://www.3fvape.com/47519-.html

More Details for Jellybox Mini kit with Jelltank >> Buy Authentic Rincoe Jellybox Mini 80W Box Mod w/ Jellytank Kit Amber

I have been vaping many years and I don’t use it too excessive and I must say I’m get totally out of breath doing the most smallest of things like getting out of the bath or getting into bed at night

Does anyone wanna try how it taste?
Note: Mesh and regular coil in one deck are not recommended without professional guidance.

Looking for a larger quantity of these. Please let me know what you have.

Thanks!

Will Freemax Maxus 50W Box Mod Kit be your first choice, compared to Maxus 200W and Maxus 100W Kit? Maxus 50W Kit is powered by a 2000mAh built-in battery with 2A fast charging and FM Chip, providing an all-day going power and 80 minutes charging time for maximum. The Fireluke 22 Tank Resin Edition originally paired with features child-resistant top fill design and leak-proof mechanism.

Do you want to know more details about the Freemax Maxus 50W Kit? There is one video below to show you the details of Maxus 50W.

Login to view embedded media
In a short conclusion, Freemax Maxus 50W Kit has four highlight features below:
1. FM Coiltech4.0 - SS904L mesh and tea fiber cotton formula
2. 2000mAh built-in battery and 2A fast charging and Type-C charge port
3. Child-resistant top fill design and leak-proof mechanism
4. Multiple output modes and smart coil detection function



Do you want to be the first batch of testers of Maxus 50w? Now please enter Freemax official website, official Instagram page, and Facebook page to join in Maxus 50W Giveaway.

Aegis Boost LE Bonus Kit is the Aegis Boost Luxury Edition that includes 5 GeekVape B Series Coils in the package to bring you more powerful vaping enjoyment. It is built with 1500mAh battery with 40W max output. With the construction of zinc alloy, top grain leather and food grade silicone, it is stain-resistant, tear-resistant and water-proof. What's more, Aegis Boost LE Bonus Kit can support Pod or RDTA and provide MTL or DTL vaping. It has 3.7ml e-juice capacity and comes with easy top filling system. Aegis Boost LE Bonus Kit is engineered for maximum comfort and ease, so it comes with some innovative designs: easy access air flow valve design, easy access top-refill pod design, quick lock & release design. May it offer you amazing vaping!


Details:

1. 5 coils in one pack
2. 1500mAh built-in battery, 40W max power
3. Supports Pod or RDTA (RDTA sold separately)
4. Provides MTL & DTL vaping
5. Easy access air flow valve/top-refill pod design
6. Quick lock and release design for switching pod system
7. Stain-resistant and tear-resistant leather sleeve
8. Rust-proof and corrosion-resistant zinc alloy body frame
9. Food-grade silicone rubber for water-proof
10. 3.7ml e-juice capacity with easy top filling design
11. Equipped with 0.42 inch OLED Screen to show vaping data

Being here is really amazing and i think i can finaly put my knowledgeabout vaping too the test here!!!

Artery Cold Steel AIO RBA Version



Artery Cold Steel AIO introduction:
As you can see from the pictures, this is a "Dual System" Mod Pod and Box Mod kit, but it has some features that make it special.
It is constructed of durable zinc alloy and can work with three different types of batteries (18650-20700-21700).

Available in two distinct versions, Artery Cold Steel AIO XP and Artery Cold Steel AIO RBA Version, the latter is the version of this test.

The Artery Cold Steel AIO RBA Version Kit comes with a 3ml capacity cartridge compatible with a refined postless rebuildable deck, the kit also includes a 510 adapter that allows you to install any atomizer just like any Box Mod.

The Artery Cold Steel AIO XP kit comes with a 4ml cartridge, its coils are compatible with those of the Nugget GT including the RBA that can be purchased separately.

The Artery Cold Steel can deliver a maximum power of 120W and supports VW (Low, Medium High), TC (NI_TI_SS), TCR, Curve Mode (3 options) Bypass and Voltage modes.
The super-complete chipset through the integrated resistance detection function (can be deactivated) automatically sets any atomizer to the best wattage, negating the possibility of exceeding the physical limit of the Coil.
It also has an intelligent and patented sensor, able to keep the liquid level under control, practically when the Pod is empty, to avoid dry shots, the sensor detects the temperature of the coil in difficulty, immediately zeroing the power.
Truly a combination of useful and innovative options, cheers !!



Enjoy the reading.

Artery Cold Steel AIO RBA Version, package:
The cardboard box with which the product arrives is black, finely finished in shiny gold color, on the front there is simply the name of the device together with an identification label (RBA Version).

On the back are the packing list, the various Artery addresses, the product code, color indication (Gun Metal 3ml), the security code, the usual logos & brands.

The remaining sides of the package are embellished with the following gold lettering: "Born For DiY Hobbyst", "Artery", "Cold Steel Aio".



Artery Cold Steel AIO RBA Version Kit Contents:
1 x Artery Cold Steel AIO MOD
1 x Artery Cold Steel AIO RBA POD (RBA pre-installed)
1 x Prefabricated Coil (Ni80 Triple Fused Clapton)
1 x 18650 Battery Adapter
2 x O-rings
1 x RBA 510 adapter
1 x Hex key
2 x Hex Screws
1 x EN-DE-FR-IT User Manual
1 x Warranty Card



Artery Cold Steel AIO RBA Version dimensions and features:
Dimensions: 39.1x 28x106.5mm
Weight: 196gr
Battery: 21700/20700/18650 (not included)
Liquid capacity: 3ml
Material: Zinc Alloy / PCTG
Modes: VW (Low, Medium High), TC (NI_TI_SS), TCR, Curve Mode (3 options) Bypass and Voltage.
Power range: 5-120W
Voltage range: 0.5-8V
Resistance range: 0.5- 2Ω
Charging Port: Type-C
Display: 0.96 inch color screen
Coil: RBA postless deck
Compatible with XP and XP RBA Cores (sold separately)
E-liquid level sensor
Top filling
There are 4 colors to choose from: black, gunmetal, stainless steel and copper.





First impressions, Artery Cold Steel AIO RBA Version:
The name "Cold Steel" reminds me of Ehpro! ... But why is this new Mod branded Artery?
Investigating the Ehpro website I discovered that thanks to a commercial agreement, this line will have the Artery brand.
Ehpro will however continue to produce the Cold Steel 100 and 200.

The first thing I noticed when I opened the package is that in this kit there are no XP coils, the supplied cartridge uses a beautiful postless regenerable Deck (very good).
The XP model cartridge with relative XP coils can be purchased separately and used on the Mod.
Not even the charging cable is present (no problem), I have always argued that external batteries must be charged with an external charger, however, those who want to recharge the mod directly can use a Type C cable by connecting it to the PC.

For this test, I got the Gun Metal version, at first glance this new Mod seems very compact and despite the weight reaches almost 200 Gr the handling is excellent.

In the image below the Artery Cold Steel AIO RBA Version compared to the best competitors on the market.



How Artery Cold Steel AIO RBA Version is made:
The frame is built in solid zinc alloy the polygonal form factor provides an angle that narrows both the front and the rear of the mod, the side panels have a texture deeply engraved in the metal that gives a good grip, towards the front area there is a slightly recessed smooth part where the fingers love to slide, at the top on both sides there are three air-flow loops (two are fake).
Cold Steel Aio and Designed By Artery are the writings that appear at the bottom on one side.



The front side features a dark plastic insert, inside we find a good quality Fire key with a shape similar to a light switch, a 0.96 "color OLED display and the rocker containing the Up selection keys. and Down.

The rear area is smooth and bare, at the top you can see the attachment area of the cartridge, but also of the 510 adapter.



The compartment / pod is particular, there are no magnets, the hooking system for the cartridge or for the 510 adapter is made up of the internal conformation of the edges that effectively block both accessories.

On the bottom of the compartment there are the two pins isolated from a peek base, the detail indicated by the arrow instead indicates the innovative liquid control sensor, this sensor detects the coil temperature and stops dispensing before the " dry puff ".

On the bottom of the Mod there is the Type-C charging socket and the battery compartment access cap. There are two vent holes on the cap.

Use discount code "FREEFRIDAY" at ThePlumeRoom.com for a FREE 60ml with purchase of either 2x 60ml, or $56 in other product. The free 60ml will show as free when added to the cart and application of promo code. Enjoy!

This promo is going out to ECF only. Through this Saturday 12/5.

#VapeHappy #ThePlumeRoomExperience

The Ultroner Alieno Transparent Edition ios, as the name suggests, the Alieno in a new transparent shell. With the same internals as the original release of the mod, the Transparent edition is one of a few new limited edition runs of the Alieno mod.

═╣ Ultroner Alieno Transparent Edition ╠═

00:00 ◄ Intro and specs
01:35 ◄ Close up
08:45 ◄ Temp Control & Wattage Vape
12:16 ◄ Thoughts


Login to view embedded media