Product introduction
Lost Vape Grus Mod 100W mod with 0.96 inches display,made of Zinc / Aluminum,powered by single 21700/ 20700/ 18650 battery with maximum power output 100W,fast charging by USB type C connector,suitable for temperature-controlled steaming (TC),also compatible with max 30mm diameter tanks. You can operate this Mod in the operation modes of VW (variable wattage), VV (variable voltage), and TC (temperature control), and change the mode at any time.

Parameters:
Size: 94.6 x 40.5 x 30.5 mm
Material: zinc / aluminum
Power Range: 5-100W
Output Voltage: 0.8V-7V
Screen:0.96" color TFT display screen
Compatiable Batteries: 21700,20700 or 18650 (not included)
Resistance Range:0.1ohm-5.0ohm
Thread: 510
Current Range: 0.3A-30A
Modes: VW / VV / TC Mode

Features:
-Maximum power output 100W
-Powered by single 21700/ 20700/ 18650 battery
-0.96 inch color screen display
-USB type C connector
-Compatible with max 30mm diameter tanks
-Suitable for temperature-controlled steaming (TC)
-Accurately Temperature Adjustment
-Multiple Safety Protection

Package includes:
1 x Lost Vape Grus Mod mod
1 x Battery adapter for 18650 battery cells
1 x USB type C cable
1 x Manual
1 x Warranty Card

Product introduction
Stratum Zero mini style mechanical mod is powered by an OLC Mosfet 2.0 chipset rich in numerous protections, escorting you a smooth and reassuring vaping experience.It is constructed from stainless steel and powered by single 18350 battery (Not included).The Stratum Zero Prestige Mini works with a side switch perfectly integrated in the tube.The ZERO Stratum combines small size, refined aesthetics, quality of machining and design to obtain a very high quality tube and totally different from the standard of the vape market.

Parameters:
Size: 26 x 46
Material: Stainless Steel
Chipset: OLC Mosfet 2.0
Thread: 510
Battery: 1 x 18350 battery ( Not included )
Resistance Range: 0.1-3ohm
Standby Operating Current: > 10uA

Features:
-Ergonomic Design
-Work with an external 18350 battery, available for enduring and strong power
-Internal OLC Mosfet 2.0 chip with multiple protections
-Side Fire Button System
-Comfortable Hand feeling
-Special mosfet inside

Package includes:
1 x Stratum Zero mini style mechanical mod

1. Augvape Druga RTA 24mm
Augvape Druga RTA is made of stainless steel with 24mm diameter. Augvape Druga RTA has 4.2ml capacity with bottom filling design. Augvape Druga RTA comes with easy dual coils building deck.


Parameters:
Diameter: 24mm
Material: stainless steel
Capacity: 4.2ml
Pin: 510

Features:
Stainless steel construction
Bottom filling design
Dual coils configuration

Packages:
1* Augvape Druga RTA
1* Bubble Glass Tube
1* Screw Kit
1* Seal kit

2. Augvape Intake MTL RTA By Mike Vapes 24mm
Augvape Intake MTL RTA By Mike Vapes comes with 24mm diameter and 3.1ml(Straight glass)/ 4.6ml(Bubble glass). Augvape Intake MTL RTA features 5 different size airholes to adjust airflow. Augvape Intake MTL RTA brings top to bottom airflow for better flavor. Augvape Intake MTL RTA adopts top filling design and leakproof design.


Parameters:
Diameter: 24mm
Tube: 3.1ml(Straight glass)/ 4.6ml(Bubble glass)
5 Different Airflow inserts: 1mm, 1.2mm, 1.4mm 1.6mm, 1.8mm
Thread: 510

Features:
Top to bottom airflow
Leakproof design
Top refilling system
5 different size airholes

Packages:
1* Augvape Intake MTL RTA
1* Bubble glass
5* O rings
4* Air plugs
4* Reverse thread screws
2* Clapton coils
1* User manual
1* Warranty card

Geekvape Mero Aio Kit 2100mAh!


Efun.top new arrival Efun New Arrivals - Latest Vaporizers and Vape device
Sale Products Efun.top Vape Sales Online Shop
US Warehouse Vapes and E-juice in US Warehouse - Efun.top

1. VOOPOO Argus 40W Pod Mod Kit 1500mAh
VOOPOO Argus 40W Pod Mod Kit is constructed of Alloy & Leather & PCTG with lightweight and exclusive hook. VOOPOO Argus 40W Pod Mod features GENE.AI chipset and 0.96 inch OLED screen to show the vaping information. VOOPOO Argus 40w Pod Mod Kit works with built-in 1500mAh battery with max 40W output. VOOPOO Argus has two pods: 4.5ml PnP Pod & 2ml PnP MTL Pod to provide half-DL and MTL vaping. VOOPOO Argus cartridge adopts infinite airflow system and bottom filling design. VOOPOO Argus pod is compatible with PnP coils.



Parameters:
Size: 108(with PnP Pod)/ 107(with PnP MTL Pod)* 33* 30mm
Material: Alloy & Leather
Battery: 1500mAh Built-in Battery
Output: 5-40W
Output Voltage: 3.2-4.2V
Chipset: GENE.AI Chipset
Resistance Range: 0.3-3.0ohm
Charging: Type-C, 5V/1A
Screen: 0.96 OLED Display
Capacity: 4.5ml(PnP Pod) / 2ml(PnP MTL Pod)
Pod Material: PCTG
Resistance: 0.3ohm PnP-VM1(DL, 32-40W)
1.0ohm PnP-R2(MTL, 10-15W)

Features:
Metal Leather Craft Design, Lightweight Design
Internal 1500mAh Battery, Adjustable output 5-40W
GENE.AI Chipset
0.96 inch OLED Screen
Infinite Airflow System
Magnetic Pod Connection, Dual Pod: PnP Pod & PnP MTL Pod
Compatible with PnP Coils
Upgraded Half-DL and MTL Vaping
Bottom Refill Design
Exclusive Hook

Packages:
1* Voopoo ARGUS 40w Device
1* PnP Pod (4.5ml)
1* PnP MTL Pod (2ml)
1* PnP-VM1, 0.3ohm
1* PnP-R2, 1.0ohm
1* Type-C Cable
1* User Manual


2. VOOPOO Argus Pro 80W Pod Mod Kit 3000mah
VOOPOO Argus Pro 80W Pod Mod Kit, made of Zinc Alloy, is powered by built-in 3000mAh battery with adjustable output of 5-80W. VOOPOO Argus Pro 80W Pod Mod kit features the GENE.TT chipset with Double ignition mode/ Smart mode/ RBA mode/ Manual mode. VOOPOO Argus Pro Mod is equipped with OLED Screen. VOOPOO Argus Pro cartridge has 4.5ml large capacity with bottom fill design. VOOPOO Argus Pro pod adopts dual slotted sliding airflow adjustment.


Parameters:
Size: 124* 35* 31mm
Mod Material: Zinc Alloy
Battery: 3000mAh built-in battery
Output: 5-80W
Output Voltage: 3.2-4.2V
Resistance Range: 0.1-3.0ohm
Chipset: GENE.TT Chipset
Screen: OLED Display
Capacity: 4.5ml

Features:
Internal 3000mah battery with max 80W output
GENE.TT chipset
OLED screen
Double ignition mode/ Smart mode/ RBA mode/ Manual mode
4.5ml large capacity with bottom fill design
Dual slotted sliding airflow adjustment
Magnetic pod nonnection
Atomizer Short Circuit Protection
Low Resistance Protection
Temperature Protection
Overcharge Protection
Output Over-Current Protection
Overtime Protection

Packages:
1* Voopoo Argus PRO Pod Mod
1* 4.5mL PnP Pod
1* Silicone Pod Sleeve
1* 0.3ohm PnP-VM1 Coil
1* 0.15ohm PnP-VM6 Coil
1* MicroUSB Cable
1* User Manual

You May Like:
VOOPOO Argus GT 160W TC Box Mod
Voopoo Argus Air Pod System Kit 900mah
$5.99 Stratum Zero Prestige Mini 18350 Mech Mod

So I’m thinking of switching my flavor profile, or expanding a little. For the past few years I’ve been using Strawberry/Strawberry candy flavors. I usually go to a place called Cool Vapors in Oxford (just in case anyone knows it) but I’m getting tired of it. (Chocolate, pineapple, and tobacco/menthol flavors are a no). What would be a good juice for me to try? From your experience?

BOO!!! Halloween Surprises!

Surprise part #1: Gift Cards Sale

Offer:GET EXTRA 5% FREE when you buy gift cards.
Valid Date: October 19,2020 - October 29,2020 (UTC-6)

Surprise part #2: Site-Wide Coupon

Offer: Site-wide 10% off
Valid Date: October 31,2020 - November 1,2020 (UTC-6)
Coupon Code: CANDY2020

Know more here:FastTech 2020 Early Bird Halloween Sale

FORZ TX80 is an all-around protected vaping device, it's tank and mod are shock-proof,water-proof, and dust-proof. If you have it, how will you test it?

RULES
1:Follow us and comment below how will you test its shock-proof/water-proof/dust-proof features. 2:You must be the legal age in your country to enter.

There will be 3 winners and all winners will be randomly selected. And winners will have 48 hours to contact us with your delivery information.

The deadline for this event is October 27.

Hey guys. This time let's look at the AVP Cube Kit by Aspire Vape. I think it will be a good choice if you are in need of a portable and easy to use MTL device. Here we go!

Aspire AVP Cube Kit adopts the next generation AVP design, with a new cube shape fits perfectly in the palm of your hand, designed for comfort. Aspire AVP Cube Kit includes AVP-Cube battery and AVP Cube cartridge with adjustable airflow. The aluminum alloy body, and weighs only 64 grams. The device is powered by a 1300mAh battery. Large battery to help achieve great performance and longer run time. It can be charged at a charging current of up to 2A via USB Type-C port. The AVP Cube has a wattage range of 10W-16W with the option to personalize your vaping experience. The operation is very simple, double-clicking the ignition button will change the power between 10W, 12W, 14W, and 16W. AVP Cube inherits the ASP chipset, with comprehensive protection to ensure safe use.

Aspire AVP Cube is equipped with a 3.5ml refillable pod. Filling the e-juice from the bottom of the pod, lift the bottom seal to refill. The pod with a magnetic base that fits snugly onto the device. The AVP Cube Pod is compatible with the brilliant AVP Pro coils. The coils are available in 0.65ohm and 1.15ohm, perfect for both MTL and sub-ohm vaping. AVP Cube has 4 airflow setting options. There are 0/2/4/8 airflow holes on both sides. You can choose the ideal airflow according to your vaping needs. Rotate the pod to adjust the airflow. Combined with precise airflow adjustment this allows you to choose between a tight or airier vape.

You may also like:
drag max vape
innokin sceptre price

Hello everyone. I'm new on here and don't know my way around yet so I hope this is in the right place. Lol. Just wanted to say hi to everyone.

I have been building my own coils for about 6 months and I am fixing to get my first mech mod. I have been learning everything I can about ohms law, battery safety how to figure battery amp by volts÷ohms. I would appreciate any advice or tips anyone feels like sharing. Also being this will be my first mechanical mod I would appreciate some recommendations. I don't want to break the bank but I don't want any junk either, so any recommendations for a good one for $60-$100 would be greatly appreciated. Have a good day.

If you are looking for a simple pod kit which is easy to use and also can fully express the taste of the juice, letting your enjoy a strong throat hit and feel the real nicotine satisfaction, this New Slyeek Pod from OMARI-O should really on your shopping list!



After our real trial of this pod, except the superb flavore, there is one thing that also pretty impressive, which is soundless. There are always some noise when you vaping, but for this little pod kit, try it, you can definitely enjoy a better and soundless vaping experience. That's kind of interesting.

Main Features:
1. Innovative air activation design
2. fully express the taste of the juice
3. Built-in 1000mAh battery, long standby time. ( Almost twice as much as Uwell Caliburn Battery, even compare to the new caliburn kit, Caliburn G, Slyeek pod is still more powerful.)
4. Support Type-C fast charging, full charge only 90 minutes

Learn More:
OMARI-O Slyeek

Register now to get your new user coupon that worth $1,000 (wholesale only) and 20% OFF coupon for retail and then enjoy better price of more latest vape devices.

Some may say, the new Thallo series from SMOK are kind of similar like Drag series from VOOPOO. So is it real? let check them out at below.

Actually the difference between the Thallo series so far is the battery.
SMOK Thallo come with 3000mAh built-in battery with max 80W output power, and for Thallo S, it come with external 18650 or 21700 battery with max 80W/100W output power.



Any new and great features?
1. 5ml side-filling cartridge, with an adjustable airflow ring at the top of mod
2. Compatible with RPM 2 coil 0.6Ω/ 0.16Ω, support for DTL/MTL vaping
3. Driven by new IQ-XS chip, 0.001s firing speed, to provide you a seamless ignition for vaping
4. Engineering metal matching leather with dreamy fluid patterns, comfortable & textured

Learn More: (Remember login first to check better price)
SMOK Thallo Pod
SMOK Thallo S

So which one do you prefer? Voopoo Drag or SMOK Thallo?

Wait, if you are not that interested in Pod kit now, we can also recommend a new 80W Box Kit from SMOK too, it's SMOK Scar Mini. Yes a new member of Scar series, with IP67 Waterproof & Dustproof & Shockproof function. Login on ElegoMall now to learn more with better price.

Register now to get your new user coupon that worth $1,000 (wholesale only) and 20% OFF coupon for retail and then enjoy better price of more latest vape devices.

https://www.2fdeal.com/search/?Keyword=drag&CateId= Voopoo Drag Max 177W 18650 VW Pod Kit 4.5ml

Display: 1.08 inch TFT Color Screen
Pod Capacity: 4.5ml
Fill Type: Bottom Fill
Pod Material: PCTG
Resistance: 0.2ohm (PnP-VM5), 0.15ohm (PnP-VM6)
Protections: Overtime / Short-circuit / Overcharge / Output Over-current / Over-Discharge / Over-temperature / Balance Charge with Different Brand Battery / Battery Reverse Protection
5V / 2A Type-C Fast Charging
Max 177W Output Power
Brand New GENE.FAN 2.0 Chip
SMART mode for beginners
Power-free RBA mode desired by professional players
Dual UI Theme Interfaces
PnP Magnetic Atomizer
Suitable for Multiple PnP Models (PnP Pod / PnP MTL Pod / PnP RTA Pod)
Compatible with All PnP Coils


https://www.2fdeal.com/_p14388.html$12.85 Vazzling Nio Style Dripper RDA / RSA Master Kit with 5 Spare Colorful Top Caps & 510 Drip Tips & Beauty Rings - Silver + Black

Features
Material: Acrylic
21.3mm diameter
Single Coil Postless Build Deck
Supports top airflow intake to reduce leaking
Bridge design airflow directed to the bottom and sides of the coil
Over squonk release ports on the lower bridge under the airflow
Top airflow intake to reduce leaking



https://www.2fdeal.com/search/?Keyword=college&CateId=Dovpo College DNA60 60W TC VW Variable Wattage Vape Box Mod 18650

Chipset: DNA60 By Evolv
Powered by 1 x 18650 Battery (not included)
Variable Wattage: 1~60W
Output Voltage: 3.2~4.2V
Resistance Range: 0.1~3.0ohm
Charging Time: 2~3 Hours
Charging Port: Micro USB Port
510 threading connection
EVOLV DNA60 chipset
Unique Side by Side Design
Ergonomic shape, comfortable to hold, agile to operate
Automatically adjust its output power to meet the desired temperature
Compatible with 24mm atomizer without overhang





https://www.2fdeal.com/_p15294.html$24 ULTON Dvarw FL MTL Facelift 22mm Style 316SS RTA 5ml w/10pcs AFC Insert

510 threading connection
22mm diameter
Capacity: 5ml
Pre-installed 1 air insert
Offset posts
Improved coil leg clamps. Ridge on the edge
Easier bottom fill (fewer turns of the tank section)
Shorter chimney, smaller chamber
Easy to replace with the help of the hex key you will find in the box with the RTA.
INSERTS ONLY FIT THE MTL FL 22 and MTL FL 24 tanks!
3 x 0.6mm
3 x 0.8mm
2 x0.8mm
2 x1.2mm
2 x1.5mm
2 x2.0mm
0.8mm
1.0mm
1.5mm
2.0mm

As is known to us, Freemax M Pro won the awards of best sub ohm tanks on Vaping360 website in 2019. Now good news comes again. This time Freemax new M Pro 2 Tank ranked first place of best sub ohm vape tanks 2020 on Vaping360 once again. M Pro 2 scores get the highest marks of 9.7. Now you should buy one M Pro 2 Tank without hesitation.



What are the reasons for Freemax M Pro 2 Tank ranking first place?
1. This M Pro 2 utilizes FM COILTECH 4.0 with SS904L Mesh and Tea Fiber Cotton formula (95% Tea Fiber Cotton plus 5% Organic Cotton).
2. There are five types of Freemax M Pro 2 904L M Coils available. What’s more, all the SS904L M Mesh Coils are compatible with M Pro tank and vice versa
3. Compared to M Pro, the Freemax Mesh Pro 2 is designed with three steel balls into the top cap to increase friction for anti-leakage.
4. M Pro 2 is designed with the combination of resin and metal, together with stylish diamond glass, which makes it so unique among all the other tanks.

Buy one Freemax M Pro 2 Tank here>> M Pro 2 Tank | Freemax - Taste the Clouds, Feel the Flavors!

Geekvape Mero AIO Kit has Stylish and simplistic appearance, with Geekvape B Series Coil to meet your flavor expectations, and a large built-in 2100mAh battery with USB Type-C for longer battery life, faster and easier charging experience.It is an all-in-one kit and is easy to handle and also has the luxury of being ultra-nomadic.Geekvape Mero AIO maintains 0.4ohm/ 0.6ohm Geekvape B Series Coils and adopts adjustable bottom airflow intake to provide MTL & DTL flavor.On the top of the Mero Aio GeekVape is a 3ml cartridge equipped with top fill.






Features:
-Adjustable airflow intake for both MTL or DTL flavor chasing
-Long-lasting battery with USB Type-C
-510 connector - Pick your favorite tank
-Three Power Output Adjustment to meet all your demand.
-Perfectly compatible with all upcoming Geekvape B series coils
-Three Power Output Adjustment
-LED Power Indicator Light
...

Click here for more:

Geekvape Mero AIO Kit: Geekvape Mero AIO Starter Kit 2100mAh 3ml

$52.99 YiHi SXmini SL Class Mod

SXmini SL Class Mod is a box mod that supports single 18650/21700/20700 cell. It is powered by YiHi SX485J and is made by 316 stainless steel and aluminum with etching. Besides, It is designed with various taste modes: Powerful+, Powerful, Standard, Soft, Eco & SXi-Q-S1~S5 and Novice mode. And you can customize your own taste through the innovative technology SXi-Q control system. SXmini SL Glass Mod also comes with some innovative features: upgradable firmware, reverse polarity, low resistance and so on.


Details:

1. Powered by the YiHi SX485J
2. 316 Stainless Steel + Aluminum with etching
3. TFT color screen
4. Supports 18650/20700/21700 battery
5. Max 100W (require battery current over 35A)
6. Joystick control
7. Precise temperature control
8. 26mm 510 connector
9. Added the Novice mode, more easy to operate for starters
10. Variable Joule supports all TC wire, SS/Ti/Ni
11. Innovative technology SXi-Q control system
12. Buck-Boost & Boost, DC-DC Converter
13. Upgradable firmware. Graphic user interface
14. Reverse polarity, short protection, low resistance, low battery voltage, overheating & battery over-charge protection





Oumier Voocean 80 Kit

Voocean 80 Kit is a pod mod system kit that is polished to be gentle, smooth and lightweight. And it comes with a 4ml large pod cartridge for whole day vaping. And it adopts innovative airflow control system from 0-10 level to provide you with fantastic flavor and effortless cloud production. Plus, it is compatible with VOM 0.8ohm and 0.2ohm mesh coils, rated for 50 to 80 watts. In addition, it is designed with the 510 thread adapter, allowing you to experience different vape with RDA, RTA or other types of the tank of 510 adapter. Besides, there is a magnetic connection between the pod and the Voocean mod. The Voocean Mod is powered by single 18650 battery and features an adjustable output range of 5 to 80W. And it is equipped with a screen to display clear vaping information.


Details:

1. Single 18650 battery and 80W max output
2. 4ml pod cartridge and bottom filling design
3. Compatible with VOM 0.2ohm and 0.8ohm mesh coils
4. Inventive airflow control system from 0-10 level
5. Designed with a 510 adapter for different vape with RDA, RTA, etc
6. Magnetic pod connection
7. Integrate multiple protections
8. Equipped with a screen







GeekVape Mero AIO Kit

Mero AIO Kit features stylish and simplistic appearance. Having large built-in 2100mAh battery capacity, it can offer you two-day vaping. It comes with three power outputs adjustment: Low, Med and High. With 510 connector design, it is of great compatibility and you can use your favorite tank to work with Mero device. Mero AIO Kit has 3ml e-juice capacity and features adjustable airflow intake. Compatible with GeekVape B Series Coils, It will provide you bigger cloud, smoother flavor and strong throat hit. Besides, you can also enjoy great MTL or DTL vaping experience with Mero AIO.


Details:

1. 2100mAh large battery capacity
2. USB type-c charging
3. Adjustable airflow intake for both
4. MTL or DTL flavor chasing
5. 3ml e-juice capacity
6. Supports GeekVape Boost Series Coils
7. 510 connector
8. Three power output adjustment: Low, Med and High

Hi, guys! Welcome to New Product Introduction! I have a question: do you need a Pod Kit at present? Today let me introduce you one pod kit named VapingGT GT Pen Pod Kit. Now let’s take a closer look at the pod kit below.
The Original VapingGT GT Pen Pod Kit is a pod system kit that features compact and portable. It consists of a 2.0ml pod cartridge with side filling design and a 900mAh built-in battery that can fire up to 40W. And it is charged via a safe and fast Type-C port. In addition, it provides Overcharge protection, Short circuit protection and Security protection to ensure your safety. Besides, it supports 0.5ohm GT Pen coil.


Main Features:
Material: Stainless Steel + PCTG + leather
Battery: Built-in 900mah battery
Pod capacity: 2.0ml
Resistance: 0.5ohm GT Pen Coil
Powered by 900mAh built-in battery with Max output power 40W
Compact & portable size
0.5ohm GT Pen Coil, with a base to steady the coil and prevent oil leakage
Half-transparent cartridge
Side-filling system Design
900mAh built-in battery and 40W max output
2.0ml pod cartridge and side filling design
Stable and fast type-C charging port
Battery power indicator and multiple protections
There are six colors for you to choose, so which color is your favourite? If you want to get one, you can come here:
VapingGT GT Pen Pod Kit >>>
Pod Cartridge:
VapingGT GT Replacement Pod Cartridge(1 PC) >>>
Coil Head:
VapingGT GT Replacement Coil Head(5 PCS) >>>

Last week we have shared a comparison between the SMOK Thallo and Voopoo Drag S. It looks like VOOPOO has known SMOK’s plan on Thallo, which has a good advantage over the Drag S – larger battery capacity and wattage output range, now VOOPOO released a new product to match Thallo – the Argus Pro from the Argus Line.

In this post, we will have another comparison for below 3 products – Argus Pro, Drag S and Thallo. Here we go:



Obviously, the Argus Pro is able to match up with the Thallo in the key specifications. While after having boths products in hands, honestely I have to say the Argus Pro is a better one out of its good quality leather material. For the vaping performance, I believe both of them are top winners, if you like PnP coils the Argus Pro will be a nice choice, while if you like RPM coils, Thallo is another choice.

BTW, the lanyard hook on the Argus Pro is totally fixed, you cannot remove it if you dont like it.

Share us your voices in comments below.

Hi again all. So here's the deal. Wanted a Nugget (gold) and now have 3. Before everyone rips me a new a hole for gouging, I'm only looking for what I paid. I'll pay shipping on my end so priority box $8.30.

So this is going to be higher than China vendors but EVERYONE is out of the Nuggets. Found this at NatureVapes in the UK so euro to dollar conversion plus $13 US to ship. SXK 70watt. I'm losing some money here.

I've had 2 SXK 70s since 2016 and have 0 problems with the Asmodus board. Resistance is same as my TAB.

So I'm looking for $117 USD shipped priority. CONUS only. No trades!

I've spoken with Evolv and because of Covid thier supplies are 3+ months out so SXK ain't getting boards either. You wanna wait, cool. You want instant gratification, here's your chance.

Thanks for looking all!

Asking $117, READ ABOVE BEFORE YOU ..... AND GRIPE

The UNI S is a super slim and lightweight vape mod device, it's the upgrade from the Yocan UNI box mod. Engineering team design this Yocan device for outdoor enthusiasts. It has preset 3 voltage levels, and has preheat mode.



The Yocan UNI S comes with the same 510 threaded adapter that comes with Yocan UNI package box. And you can install your favorite 510 threaded oil cartridge with this adapter.

Main Features:
super slim
lightweight vape mod
preset 3 voltage levels
preheat mode
510 threaded adapter

Learn more Yocan UNI S or other vape box mod features, please visit our official site Yocan.com

A new e-cigarette from Geekvape, this time in tube and pod format. The Mero AIO Kit is an easy-to-use and stand-alone all-in-one kit with its 2000 mAh. This kit also offers interesting power. A practical, nomadic and efficient electronic cigarette. What could be better?

Parameters:
Battery: built-in 2100mAh battery
Three output: Low White, Med Blue, High Green
Capacity: 3ml
Resistance: Geekvape B Series Coil 0.4ohm(25-33W)
Geekvape B Series Coil 0.6ohm(15-25W)

This AIO Mero pod takes advantage of Boost resistance technology. Its reservoir allows it to integrate 3 ml of eliquid with a simple top-fill system. Its simplicity does not prevent a certain customization with an adjustable airflow at its base.

Its compact dimensions: 112 x 22 mm allow it to be placed discreetly in your pocket or in a bag. A perfect material to start vaping, but also perfect to act as an auxiliary device. On the top of the Mero Aio GeekVape is a 3ml cartridge equipped with top fill. To inject your e-liquid, all you have to do is lift the seal that surrounds the top of the tank.

To satisfy the most demanding GeekVape allows you to manage the airflow by simply rotating the cartridge. Compatible with Boost coils, the Mero Aio pen vape kit from Geekvape ensures a tasty vape that will delight novices and experts alike.

Related vape kits you may prefer:
geekvape zeus nano tank for sale
geekvape aegis hero for sale

From Dick Durbin:

".. Many of these products were illegally introduced to the market after August 8, 2016, without an FDA marketing order. For years, FDA has inadequately enforced this deeming rule requirement, stemming from the fact that the agency never maintained a list of products on the market by August 8, 2016.

As part of FDA’s plan..., the agency committed to quickly removing from the market all new tobacco products that did not submit PMTAs by September 9. To do so, FDA has stated it will, “make publicly available a list of the deemed new tobacco products that are subject to the Sept. 9 deadline, were on the market as of Aug. 8, 2016, and for which a premarket application is submitted by Sept. 9, 2020."

It has been more than one month since PMTA applications were submitted to FDA.

In order to protect public health and uphold the duty to enforce against products on the market that are out of compliance, I urge FDA to immediately publish a comprehensive product listing of all relevant e-cigarette applications received by FDA...

... it is imperative that FDA publicize its list..., so thorough enforcement can quickly follow......"

"Richard Joseph Durbin is an American attorney and politician serving as the senior United States Senator from Illinois, a seat he was first elected to in 1996. He has been the Senate Democratic Whip since 2005, the second-highest position in the Democratic leadership in the U.S. Senate." Wikipedia

I was going to vote for Joe Biden in the coming election but now if I vote at all it will be Libertarian !

I've been using 14GA needles with 20ml syringes, the plunger is SO hard to pull and fills very slowly. Been looking for 12GA needles but the seem few and far between. I'm looking into getting bottles for measuring by volume any recommendations? Also for weight what kind of scales are you using? 500+ grams and .01g I assume would be needed? Thanks I am somewhat new to DIY

I have dabbled in mixing for a while but only now semi-seriously getting into it. I have made some good mixes for myself and a few for my grandpa. He has been vaping the same coffee from Good Life called 9 to 5 for years. I have made mix 2.5% French Vanilla Cream (TFA) 2.5% Cappuccino (FW) and 1% Sucralose, no nic, 50/50 PG/VG Steeped 2+ weeks

I didn't think it was harsh, he says it is only very slightly harsh compared with his daily juice. Any suggestion? or flavor suggestions? He likes a mild flavor with little sweetness, knocking the sweetener down as the Vanilla has some sweetness to it.

Thanks.