The Kick by Evolv--Coming to Super-T!

Discussion in 'Super T Manufacturing' started by forcedfuel50, Nov 8, 2011.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. forcedfuel50

    forcedfuel50 Forum Supplier ECF Veteran

    Joined:
    May 13, 2009
    Location:
    The Great State of Minnesota
    I am pleased to announce that Super-T Manufacturing will be carrying the Kick drop-in module by Evolv! Like it's bigger brother, the Darwin, the Kick will feature power regulated, adjustable wattage with safety features like low battery cutoff and short-circuit protection. The Kick is designed as a drop-in module that will physically fit into your existing 18650 device while using an IMR 18490/18500 battery.

    These are in the testing phase, so some aspects are subject to change and i will keep you updated with any news.

    David

     
  2. Knucks

    Knucks Senior Member Verified Member ECF Veteran

    Joined:
    Feb 21, 2011
    Location:
    NC
    Best news Ive heard in a while! The beauty and simpliciy of a P18 with an inexpensive VW module and all under one roof, right here at Super T. I cant wait!!! Keep us posted David!!!
     
  3. intuition

    intuition Senior Member Verified Member ECF Veteran

    Joined:
    Apr 10, 2011
    Location:
    Germany
    Appreciate the "engagement" - Can't wait to "attend the wedding" :p
     
  4. skinnee

    skinnee Senior Member ECF Veteran

    Joined:
    Aug 29, 2011
    Location:
    Minneapolis
    yup, that seals it... P+18650 will be added to the stable.
     
  5. forcedfuel50

    forcedfuel50 Forum Supplier ECF Veteran

    Joined:
    May 13, 2009
    Location:
    The Great State of Minnesota
    Remember too, it'll go nicely with most all makes of 18650 mods, not just the Precise :) I think it's especially appealing with the Precise in that you get to keep the quality of the Precise and have the adjustability of the Kick without having to modify your mod and can revert back to all mechanical in a flash!
     
  6. Vaporologist

    Vaporologist Vaping Master Verified Member ECF Veteran

    Joined:
    May 26, 2010
    Location:
    Epic Journey
    That is very good news indeed! A VW P+ is an absolute dream come true!!! :thumbs:

    David, can you speculate on whether the Kick will work with a P+18500 and AW IMR 18350 battery?
     
  7. mwa102464

    mwa102464 ECF Guru ECF Veteran

    Joined:
    Oct 14, 2009
    Location:
    Outside of the Philadelphia Burbs, NJ & Fla
    That's some good news right there !
     
  8. mianker

    mianker Super Member Verified Member ECF Veteran

    Joined:
    Mar 10, 2010
    Location:
    USA
    Yeah, I am currently waiting for a shipping notice on my P+ 18650 and the kick will be a MUST have accessory. :D Nice to know I will be able to purchase it from Super T.
     
  9. forcedfuel50

    forcedfuel50 Forum Supplier ECF Veteran

    Joined:
    May 13, 2009
    Location:
    The Great State of Minnesota
    That will be tested by one of the beta testers of the kick and i'll give a test too with my kick, so we will find out.

    I really should also load test the IMR 18350 vs the IMR 18490/18500 at some higher wattages and see what i come up with.
     
  10. 440BB

    440BB Vaping Master Verified Member ECF Veteran

    Supporting member
    Joined:
    Apr 19, 2011
    Location:
    The Motor City
    After the Kick proves itself, will there be a P+ version that will accomodate an 18650 with a Kick?
     
  11. Vaporologist

    Vaporologist Vaping Master Verified Member ECF Veteran

    Joined:
    May 26, 2010
    Location:
    Epic Journey
    That would be great if you would test that! I know the IMR18350 batt would have to be changed a lot more often but I would love to have the P+500VW when out-and-about because of it's perfect size... I really hope this could work, can't wait to see what your tests reveal. Thanks.
     
  12. ChaosAffect

    ChaosAffect Moved On ECF Veteran

    Joined:
    Dec 19, 2010
    Location:
    Georgia
    Hallelujah, someone other than nHaler is carrying the Kick! My money is yours, good sir!
     
  13. strprswpr

    strprswpr Vaping Master Verified Member ECF Veteran

    Joined:
    Apr 29, 2011
    Location:
    Bronx, NY
    Bookmarking this one too.....
     
  14. cba191

    cba191 Vaping Master Verified Member ECF Veteran

    Joined:
    Aug 11, 2011
    Location:
    Salt Lake City
    If there's a list, can I be on it? :D
     
  15. cba191

    cba191 Vaping Master Verified Member ECF Veteran

    Joined:
    Aug 11, 2011
    Location:
    Salt Lake City
    I'd be interested in the p+18500 with the 18350 as well.
     
  16. ED-209

    ED-209 Super Member Verified Member ECF Veteran

    Joined:
    Jul 17, 2010
    Location:
    Florida Panhandle
    Darn it, I knew I should have ordered the 18500 instead of the 18350, here's hoping they come out with a 18200 battery so the kick can be used on the 18350 version or if maybe an extension cap (which I know goes against the Precise motto) comes out but not holding my breath :(
     
  17. forcedfuel50

    forcedfuel50 Forum Supplier ECF Veteran

    Joined:
    May 13, 2009
    Location:
    The Great State of Minnesota
    First thing we'd have to see is just how long it would be, might start to get a bit long, though an IMR 18650 saves a couple of MM over a protected 18650.
     
  18. forcedfuel50

    forcedfuel50 Forum Supplier ECF Veteran

    Joined:
    May 13, 2009
    Location:
    The Great State of Minnesota
    First things first will be determining whether the AW IMR 18350 will even adequately power the Kick. If so, even if the vape times are reduced, it might be viable. Time will tell.
     
  19. RippleInStillWater

    RippleInStillWater Supplier's Manufacturer - Offline ECF Veteran

    Joined:
    Jun 18, 2010
    Location:
    Land Of Corruption
    After today you have a fanboy for the duration, I know where I'm buying mine when they become available........:thumb:
     
  20. cappadoc

    cappadoc Super Member Verified Member ECF Veteran

    Joined:
    Sep 9, 2010
    Location:
    Michigan
    I'm definitely in for an 18650 based Kick mod. Is there any way to just add a small extension to existing P18's. A 15mm spacer with a drop in kick would be amazing.
     
Thread Status:
Not open for further replies.

Share This Page