The Overlooked Tootle Puffer Gear Thread

Status
Not open for further replies.

Shawn Hoefer

ECF Guru
ECF Veteran
Verified Member
Jan 21, 2015
11,191
49,147
58
Arkansas Ozarks
It was either Mooch or Baditude that identified those 35A Efests as HE4s, which are excellent batteries. I'm sure they've treated you very well. You're also a smart cookie. I don't like, on an ethical level, a company that over-specs its products like that. There are some vapers who will pick up that "35A" battery and push it to 38 or 40A. Mislabeling and outright lying are simply variables I'd like to see disappear from vaping. The process is already far to difficult for the average smoker. Just my :2c:.
I have several of this vintage with button tops because I have two mechs that don't cooperate with flats. I build to around .3 which comes out to around 16 Amps so I feel OK.

Now, I never buy anything except HG2s for my regulated devices, Samsung 25R for most everything else.

With my MXJOs and Efests, I kinda figured they were putting pulse ratings, so I built to 1/2 the rating or lower.

Sent from my SAMSUNG-SM-N910A using Tapatalk
 

DavidOck

ECF Guru
Supporting Member
ECF Veteran
Jan 3, 2013
21,239
178,485
Halfway to Paradise, WA
With my MXJOs and Efests, I kinda figured they were putting pulse ratings, so I built to 1/2 the rating or lower.

Yep, good to have some "headroom" in your planning, as the actual performance ratings will decrease over time as the battery ages.
 

subwayaznm

A Geek with a Cool slice
Verified Member
Jan 24, 2016
1,433
6,323
USA
Can I hear from anybody that has tried the Tilemahos v 2 and the Springomizer Build Deck?

I have the Authentic and a Clone and enjoy the flavor produced by both. Of course the Authentic is built better, but with the GG springomizer it seems to balance out the Clone.
Let me know what you think pleaseView media item 429391
 

MikeyConti

VapeBro
ECF Veteran
Verified Member
Jul 22, 2014
3,885
17,524
35
South Carolina
Can I hear from anybody that has tried the Tilemahos v 2 and the Springomizer Build Deck?

I have the Authentic and a Clone and enjoy the flavor produced by both. Of course the Authentic is built better, but with the GG springomizer it seems to balance out the Clone.
Let me know what you think pleaseView media item 429391
Pretty interesting! Where did you get the Springomizer Deck? Just kind of browsing around right now. :)
 

subwayaznm

A Geek with a Cool slice
Verified Member
Jan 24, 2016
1,433
6,323
USA
Pretty interesting! Where did you get the Springomizer Deck? Just kind of browsing around right now. :)
Here ya go Mikey, Tilemahos V2plus Parts eSmokeGuru
Enjoy I sure have F L A V O R! and simple If you would like to see how to build the Simple Deck PBusardo on You Tube has a review up on it. That is how I found out about it; and his review was spot on I must add. I'm sure a witness to that. Twice Real Deal & a Clone both with the Upgrade SPringomizer @ 1.4 ohms.
PS: Imeo the Distributor is a member here on ECF and their is a Thread on the SPringomizer
Tilemahos new rebuildable part (springomizer)
 

O.C.D.MakesMeDoIt

Super Member
Verified Member
Jan 9, 2016
547
3,025
Arizona
I don't like a fast heat up. It gets too hot too fast. I'm good with 28g. Haven't tried 26. Might need to try that.

Sent from my LG-V700 using Tapatalk
Don't forget 27 :lol:
Why are the odd numbers almost always skipped (and harder to find)?
 

O.C.D.MakesMeDoIt

Super Member
Verified Member
Jan 9, 2016
547
3,025
Arizona
Browsing the 70% off isle at HG, stumbled on a mod promising a "safe and profound vaping experience", perhaps achieved from its "Button twist lick"?
If Flavor & Clouds isn't enough and you seek a more Profound vaping experience...
65W Vision DEUS 18650 MOD Kit W/O Battery

There is so much amusement to be had between typos and translations. (I'm obviously easily amused) :lol:
 

rhelton

Vaping Master
ECF Veteran
Verified Member
Aug 15, 2014
4,161
15,514
spokane, wa
I got vapemail today and I think it's tootle-puffer gear. A shiny new Sat22 is sitting on my old iStick 30 with a whopping 1.1 Ohm build at a raging 16 watts.

Sent from my SAMSUNG-SM-N910A using Tapatalk
I seen you last night on Tommy's show and I could not remember where I had seen or met you before.

Now I remember :)
 

rhelton

Vaping Master
ECF Veteran
Verified Member
Aug 15, 2014
4,161
15,514
spokane, wa
Can I hear from anybody that has tried the Tilemahos v 2 and the Springomizer Build Deck?

I have the Authentic and a Clone and enjoy the flavor produced by both. Of course the Authentic is built better, but with the GG springomizer it seems to balance out the Clone.
Let me know what you think pleaseView media item 429391
I want to get a clone from FT so I can order a Springomizer. I think that is a great idea for a build deck.
 

MikeyConti

VapeBro
ECF Veteran
Verified Member
Jul 22, 2014
3,885
17,524
35
South Carolina
Here ya go Mikey, Tilemahos V2plus Parts eSmokeGuru
Enjoy I sure have F L A V O R! and simple If you would like to see how to build the Simple Deck PBusardo on You Tube has a review up on it. That is how I found out about it; and his review was spot on I must add. I'm sure a witness to that. Twice Real Deal & a Clone both with the Upgrade SPringomizer @ 1.4 ohms.
PS: Imeo the Distributor is a member here on ECF and their is a Thread on the SPringomizer
Tilemahos new rebuildable part (springomizer)
Thanks for the info! :thumb:
 

subwayaznm

A Geek with a Cool slice
Verified Member
Jan 24, 2016
1,433
6,323
USA
I want to get a clone from FT so I can order a Springomizer. I think that is a great idea for a build deck.
Good deal; I'm pretty sure that you'll enjoy the Vape. You'll find that the Deck that comes in the Clone isn't as nice nor simple as the Springomizer Deck. Much better made and simple as can be. Perfect fit also.
Enjoy:) and of course Vape On
 
Don't forget 27 :lol:
Why are the odd numbers almost always skipped (and harder to find)?
Lightning vapes has a promo going on for wire for another 24 hours or so, add in ohmsweetohm code and you can get 32% off wire. 250ft of 29ga (or 27) shipped for 10$. :thumbs:
 
Status
Not open for further replies.

Users who are viewing this thread