Tootle Puffers, Part Three! (The Sequel of the Redux)

TrollDragon

ECF Guru
ECF Veteran
Dec 3, 2014
10,556
57,665
NS, Canada
I'm using a juice that's really high VG, but it's not listed ANYWHERE (what the exact mix is). It's running fine, but I do need to recoil (Ha!) often. The juice is Namber Nostalgia, if anyone knows what that mix is. It's fargin' THICK (is all I know).
This site here says it is a 50/50 ratio, a reviewer on a different site claimed it was 50/50 as well.
Namber Juice - Vaporium Online Shop
 

DPLongo22

"Vert De Ferk"
ECF Veteran
Verified Member
Dec 17, 2011
32,954
182,700
Midworld
@DPLongo22, what are these "Drop In" coils of which the illustrious Madame Kat speaks? (I'm asking you because she's prolly still drooling into her pillow ;) )

Believe not what comes from my mouth (or fingers), Dinger. ;-)

It's the second biggest lie currently being spread in Vapeworld. Ms. Kat fancies herself a blister-packer, as do I (obviously), and has fought the concept of doing this work (and it IS "work") with every cell in her body. It's possible that I convinced her into believing in unicorns (or Santa Claus, "honest politicians", etc,) by creating a mental construct of something that doesn't really exist, but that would be about the extent of it.

Does that make sense or did I wind "The Story" into something even MORE confusing (as I sometimes/occasionally do)?

Put more simply, there is no such thing. We're LYIN' through our teeth. :D
 

DPLongo22

"Vert De Ferk"
ECF Veteran
Verified Member
Dec 17, 2011
32,954
182,700
Midworld

TrollDragon

ECF Guru
ECF Veteran
Dec 3, 2014
10,556
57,665
NS, Canada
For those having trouble trapping wires on a Kayfun style deck or any deck for that matter with a flat surface. Take a small file and cut a little groove on an angle away from the screw hole. That way the wire will trap in the groove and stay there even if the coil screws are a little rounded on the bottom.

rLRqo7hh.jpg
 

DPLongo22

"Vert De Ferk"
ECF Veteran
Verified Member
Dec 17, 2011
32,954
182,700
Midworld
For those having trouble trapping wires on a Kayfun style deck or any deck for that matter with a flat surface. Take a small file and cut a little groove on an angle away from the screw hole. That way the wire will trap in the groove and stay there even if the coil screws are a little rounded on the bottom.

rLRqo7hh.jpg

I think I love you.
 

Uncle

Resting In Peace
Supporting Member
ECF Veteran
Verified Member
Jun 15, 2011
32,527
116,452
Even closeted Aspies. :mad: Only Uncle will understand that one.


Who "Me" . . .
b73bb6f6_nah.gif


WAIT . . . SO - "If you find talking to yourself enjoyable, actually more enjoyable than talking to other people." AND - "If someone asks "How are you?" and you actually explain your current physical & mental state to them." THEN - "You wonder why people ask you how your day was, but then they walk away before you have finished telling them?" Or - "You edit a post 6 times just for typos and spelling mistakes because you're paranoid someone will misinterpret what you say." But - "You have over 100 friends on Facebook that you have never talked to online or in person." Yet - "You're reading this thread on your iPhone while someone is trying to talk to you."

Okay - I Guess "You're" Correct - I Do Understand (but then again looking closely it really could be any one here or Ya' All ;) ) . . .

gSSS1mQ.jpg



(BTW: Ya can read more of these quotes here: You Might Be An Aspie If...)
 

TrollDragon

ECF Guru
ECF Veteran
Dec 3, 2014
10,556
57,665
NS, Canada
I think I love you.
It's all good... :lol: :lol: :lol:

I do that to all my KF's, just makes things so much easier and should have been done at the factory.

Some user had the unmitigated audacity one time to tell me that wires didn't trap because my Kayfun was NOT an authentic... :facepalm:
 

DPLongo22

"Vert De Ferk"
ECF Veteran
Verified Member
Dec 17, 2011
32,954
182,700
Midworld
It's all good... :lol: :lol: :lol:

I do that to all my KF's, just makes things so much easier and should have been done at the factory.

Some user had the unmitigated audacity one time to tell me that wires didn't trap because my Kayfun was NOT an authentic... :facepalm:

But, of course they did. ;)

Kat's going to be thrilled. She can use the black one now. :thumbs:

Me too, for that matter.

...IF we were into that sort of thing (building), of course. :unsure::laugh:
 

DPLongo22

"Vert De Ferk"
ECF Veteran
Verified Member
Dec 17, 2011
32,954
182,700
Midworld
Some user had the unmitigated audacity one time to tell me that wires didn't trap because my Kayfun was NOT an authentic... :facepalm:

And if I tried really hard, I could probably guess which user. :lol:

But I will not do such a thing. :danger:
 

DavidOck

ECF Guru
Supporting Member
ECF Veteran
Jan 3, 2013
21,231
178,420
Halfway to Paradise, WA
@TrollDragon, I'm using 65p/35v in the KF Mini 2.1. My normal juice is more like 70-80 VG - do I need to reformulate some of my flavors for higher PG to use in the KFs (including the newer ones I'm ordering?)

65 P should be fine, Dinger. That's about where my DIY comes in, and no problems on any of my KFs. (I mix my nic base to 60/40, the flavorings bring up the PG some.)

I'm using a juice that's really high VG, but it's not listed ANYWHERE (what the exact mix is). It's running fine, but I do need to recoil (Ha!) often. The juice is Namber Nostalgia, if anyone knows what that mix is. It's fargin' THICK (is all I know).

You could probably just rewick after a dry burn, DP. Yep, some flavors are real gunkers, but if you like the flavor, you just deal with it! :lol:
 

pokemom

Ultra Member
ECF Veteran
Verified Member
Apr 24, 2014
2,087
9,739
Lauderhill, Florida, United States
THANKS, TD!

Shows you what I'm used to. I can't even imagine me higher than that. Yowsa!!!!! :blink:
All of the NamberJuice originals are 50/50. If you get into the Grimm KVLT line or the EpiClouds line your are then talking high VG.
 

DingerCPA

Vaping Mistress
ECF Veteran
Verified Member
Apr 9, 2014
9,020
61,413
Corn 'n' Cows
Believe not what comes from my mouth (or fingers), Dinger. ;-)

It's the second biggest lie currently being spread in Vapeworld. Ms. Kat fancies herself a blister-packer, as do I (obviously), and has fought the concept of doing this work (and it IS "work") with every cell in her body. It's possible that I convinced her into believing in unicorns (or Santa Claus, "honest politicians", etc,) by creating a mental construct of something that doesn't really exist, but that would be about the extent of it.

Does that make sense or did I wind "The Story" into something even MORE confusing (as I sometimes/occasionally do)?

Put more simply, there is no such thing. We're LYIN' through our teeth. :D

Wait, whut? You LIED to me????? :oops: Now, now, I'm a blister-packer too. Sometimes I just want to stop, drop, fill, and roll. Other times, I want to "challenge" :sneaky: myself, just to see if I can DOOOOO EEEEET!

For those having trouble trapping wires on a Kayfun style deck or any deck for that matter with a flat surface. Take a small file and cut a little groove on an angle away from the screw hole. That way the wire will trap in the groove and stay there even if the coil screws are a little rounded on the bottom.

rLRqo7hh.jpg

MWAH HA HA HA HA HA HA HA HA..... I have the SECOND KF Mini 2.1 rolling!!!!!! 28g, SS316, 9/8, 2mm with "mulleted" rayon.... Running about 0.85Ω at 12W on a Cloupie Mini+

I WIN! I WIN! I WIN!!!!!!!!

NOW, I'll be apt to channel the deck as shown above. I am leery of adapting too much because I don't want to destroy something. (Like I did to a cheap RDA I was trying to make BF :confused: But, it *was* cheap, so I didn't feel TOO bad.)

HAPPY TOOTLER!!!!!!
 

DingerCPA

Vaping Mistress
ECF Veteran
Verified Member
Apr 9, 2014
9,020
61,413
Corn 'n' Cows

It's more expensive than FT. And, I wanted to get a "Plus" (well, 'cause I'm plus-sized mahself :D ) So, is it worth $5 to wait - I suppose it is for me.

Let me rephrase - the SXK from FT *IS* more expensive than the one at 3F, but the Plus at 3F is more expensive than FT. $30 at FT compared to $35 at 3F..... Prolly doesn't matter in the grand scheme of things
 

MikeyConti

VapeBro
ECF Veteran
Verified Member
Jul 22, 2014
3,885
17,524
35
South Carolina
All of the NamberJuice originals are 50/50. If you get into the Grimm KVLT line or the EpiClouds line your are then talking high VG.
I used to run Epiclouds - Cartomizer Crush MAX VG through my KF4 no problem! :D
 

DPLongo22

"Vert De Ferk"
ECF Veteran
Verified Member
Dec 17, 2011
32,954
182,700
Midworld
All of the NamberJuice originals are 50/50. If you get into the Grimm KVLT line or the EpiClouds line your are then talking high VG.

All I knew about it is that I like the way it tastes. The two places I'd found it had no listing (PG/VG), and were unresponsive to emails.
 

DPLongo22

"Vert De Ferk"
ECF Veteran
Verified Member
Dec 17, 2011
32,954
182,700
Midworld
Wait, whut? You LIED to me????? :oops: Now, now, I'm a blister-packer too. Sometimes I just want to stop, drop, fill, and roll.

Welp... yes. Yes, I did (lie). Please forgive? :D

I always prefer to drop-in, but gave into The Madness about six months ago. I had to try it (because of what everyone said).

Ultimately, that only made me more confused. It knocked nothing out of my lineup, and instead simply ADDED one. Just what I needed. :facepalm:

But at least Uncle Sam can't screw me now.
http://nypost.com/2016/05/01/why-is-the-government-out-to-destroy-vaping/
 

DingerCPA

Vaping Mistress
ECF Veteran
Verified Member
Apr 9, 2014
9,020
61,413
Corn 'n' Cows
Welp... yes. Yes, I did (lie). Please forgive? :D

I always prefer to drop-in, but gave into The Madness about six months ago. I had to try it (because of what everyone said).

Ultimately, that only made me more confused. It knocked nothing out of my lineup, and instead simply ADDED one. Just what I needed. :facepalm:

But at least Uncle Sam can't screw me now.
http://nypost.com/2016/05/01/why-is-the-government-out-to-destroy-vaping/

All forgiven ;)

I started building PT2 heads a couple years ago. Then I ventured into those things called RDAs. I am not super keen on dripping (don't know how y'all did it "back in the day") and prefer some amount of volume before I have to refill.

But, I can cater to my mood (and be prepared for any impending doom). I just wish I had more hands to hold all the setups I want at one time :D
 

Users who are viewing this thread