Search results

It's not illegal to do here in my state, they only put the sign up so that people who are really against it don't freak out

Do yourself a favor. Pick up some Hold Fast Vapors - Jaws or Mutiny. At my local south California shops they are far and away the best selling liquids

Best batteries I've found to date are the MXJO, purple and green efest (not rated as high but 4200mah), and if you can find an orbtronics 26650

Good post ;)

If you can still find this mod (custom plume veil 26650 cloud kicker society hybrid. Beware I've melted batteries with this mod)

Both are great for flavor. Veritas for no leaking at all, but harder to build than magma. If you're experienced building go veritas. If not, magma is right up there. Also changing your pg/vg ratio can really help your itchy throat

I would use 28g triple vertical coil. Reason I would use 28g is 3 coils with 6 wraps comes out to .3 ohms. Use more wraps to get to .5 to really start

You have to use something with a smaller chamber. Everyone else is saying magma, I'm in agreement. Tho if you're trying to do it on a 454, you can't be sub ohming it.

Technically you should be able to get this effect with most RDAs and RDTAs if they have adjustable air flow. I've done it with plume veil, veritas, kayfun, you name it. You should've drilled out your Kayfun

I think everyone here tinkering with rda's has had this issue at some point. Personally I have run .12 builds and I've dusted 15ml bottles in a day and a half. All of a sudden it was cheaper to smoke cigarettes! But I NEEDED that warm to hot throat hit to keep me off cigs. What to do? You have a...

Vape Citi in Fullerton. Guys are awesome and actually work for top name manufacturers in the industry

The easiest way to put this is the longer the total wire used, the more resistance. If you find a way to use less wire, your resistance will be lower. Try a smaller diameter, less wraps, more coils, or go down to a 22g. Your ohm meter is more like +/- .2 ohms so really anything near that can...

MXJO batteries are supposed to be rated at 35A continuous, 60A pulse. Whether these are rebranded / rewrapped cells remains to be seen

Thanks for the info. In real situations these numbers can become construed by a lot of variables. Has anyone actually tested the resistance change on an actual build? I see people use these ohm meters that are rated at +/- .1 or .2 ohms which makes sub ohm builds inaccurate

As a high voltage engineer, I know what impedance is (equivalent to resistance in an A/C circuit) but not really resistance. In its basic form the same rules apply. Basically the law says that the higher the temp, the higher the resistance. We are using circuits that are trying to increase temp...

CloudKicker | S x Aether Tech = 26650 hybrid with custom plume veil and tip. Notorious

As a high voltage engineer (not d/c current, mind you), it's pretty safe to say that none of you are factoring in demand factors, coincidence factors etc. You are probably testing your coils with equipment that is + / - .2 ohms making any of your measurements below that number completely moot...

That doesn't really matter when using a rebuildable Atty as the coil you build determines the power / resistance. GGTS is telescoping so you can use different voltage batteries with it as well.

Thats fairly easy, buy it direct from provape on their website. Any 510 connector will do. Don't know your specific accessories but I would recommend boge 2.2 carts if that's what you're into. Also a simple tank. Of course 2.2 won't let you max the limits on it but that's another discussion and...

You're receiving errors ABOVE E-2? I've never received an error higher than 2 with voltage changes. I'll have to look it up. If I'd have to guess something is shorting due to the resistance change lol. That definitely shouldn't happen.