I dont understand when people say that the TH is down to nic level, I think this is wrong TBH I am a low nic user ( maybe 4-8mg ) and the TH really depends on setup, pg/vg and flavour the nic level has never made any difference to the TH on every setup I have tried.
- Status
Less vapor? VG will give you more vapor... Yes it does mute TH... I use it at 30mg nicotine so I still have TH....
My tank is setup with LR boge carts, and it doesnt work well with 100% VG. I have slotted the carts plenty big enough, but it just doesnt work. Most times when I get half way through the tank, the juice just sits there and burns out till its super dark and nasty. Lately I have been using nothing but vision clearomizers instead, and its soo much better. If you insist on vaping 100% VG like me, you should explore other options.
Do you thin your VG? I've had a tough time with clearos wicking pg let alone vg with the pace that I vape. I only use sr slotted carts at 4.5 to 6 volts lately and it's been working great.
Ragedoll I don't understand this "Hey, you must mix PG and VG together, its the best solution.
You can mix more VG to get more vapor but I never heared about someone use only VG !? %-)". So is everyone that is vaping Boba's Bounty mixing it with a bit of PG? I'm so lost right now. I slotted my cart today and it helped a little. Instead of 5v I moved down to 4.8v with the same lack luster vapor production. I did try dripping it with the atty that came with my VTube and I was getting clouds at 3.8v, but I vape so much it is way to tedious to drip on a constent basis.
You can mix more VG to get more vapor but I never heared about someone use only VG !? %-)". So is everyone that is vaping Boba's Bounty mixing it with a bit of PG? I'm so lost right now. I slotted my cart today and it helped a little. Instead of 5v I moved down to 4.8v with the same lack luster vapor production. I did try dripping it with the atty that came with my VTube and I was getting clouds at 3.8v, but I vape so much it is way to tedious to drip on a constent basis.
Put a really nice slot in those Boge Cartos with the Dremmel, I make mine 1/8 wide x 3/8" long Slot and do 2 of these slots and I never have a wicking issue usinga thick VG Juice, though I rarely use a carto anymore but doing them like this they keep wet, take a pin and make sure the corners of your slots are open also by pushing any thin metal left from the slotting of it, even take your pin and make sure you can push it into the corner and make sure there is a small opening in between the filler and the metal in the metal corners. Depending on the juice start with one slot, if its not enough just pull the carto and make a second slot.
To many people run there cartos with a small punched hole with VG Juice or thick juice and the carto runs to dry and they burn up to fast this way, slotting them like above insures they keep nice and wet and will also net you more flavor.
On DC Cartos I prefer small holes and use the dremmel but only make a score into the side of the Carto wall not going all the way threw, just a deep score into the metal carto wall, then I take a sharp needle and hold it with a rubber jar opener or something that allows me to grab it really good, then turn it into the scored carto wall while applying very little pressure to make a small hole. I usually start with 2 of these and if need be go to 3 or even 4 at times.. Seems for some reason with the DC Cartos these smaller holes work better and on the Boge style making the bigger slot in the carto works better. Remember make 1-2 of those nice slotted cuts with the dremmel on the Boges when using a thick VG juice and try these smaller holes and as many as you need on the DC Carto's
I'll post a picture of how I do a DC Carto below,
DC Carto =
To many people run there cartos with a small punched hole with VG Juice or thick juice and the carto runs to dry and they burn up to fast this way, slotting them like above insures they keep nice and wet and will also net you more flavor.
On DC Cartos I prefer small holes and use the dremmel but only make a score into the side of the Carto wall not going all the way threw, just a deep score into the metal carto wall, then I take a sharp needle and hold it with a rubber jar opener or something that allows me to grab it really good, then turn it into the scored carto wall while applying very little pressure to make a small hole. I usually start with 2 of these and if need be go to 3 or even 4 at times.. Seems for some reason with the DC Cartos these smaller holes work better and on the Boge style making the bigger slot in the carto works better. Remember make 1-2 of those nice slotted cuts with the dremmel on the Boges when using a thick VG juice and try these smaller holes and as many as you need on the DC Carto's
I'll post a picture of how I do a DC Carto below,
DC Carto =
Attachments
Last edited:
Switched to Boge 3.0 XL SR and slotted them and am using Boba's without having to thin it with no problems and tons of vapor. I am one happy camper right now 
- Status
Similar threads
