If you don't mind my asking - what 306 atomizers did you measure / test fit with these? The reason I ask is because every 306 vendor seems to have different sizing and I don't want to order one if it doesn't fit. Or if you could post the ID (Inner Diameter) size of the 306 connection side?
306 adapter sleeve?
- Thread starter RedAlert
- Start date
- th_trl_thread_readers 0
- Status
No prob. I designed it around the Cisco 306, and the ID is 0.297" (7.57mm).
I'm pretty sure that they will work fine. There have been a couple people that use IK attys that have had no problems.
Unfortunately the FDA approved virgin teflon only comes in white. Safety first.
I have black carbon fiber 3m vinyl that will do the trick, once I get mine I'll cut a strip and apply it around the tip that protrudes, I'll post a pic soon.
We made it out of the same virgin teflon that we make our ptfe tru flow drip tips out of.
Forgot to order the Tru-Flow drip tips and didn't realize the sleeve doesn't work well with regular dts, no biggie. Just put an order in for 2 Tru-Flow dts..Ultra is working great so far
That black looks good on the adapter sleeve.
Is the brass piece on top of the switch assembly supposed to come off? I assembled it back together and seems to be working fine..Just wanted to make sure I didn't hurt anything.
Matrix: are you referring to the brass piece that contacts the atomizer? if so, yeah, it comes off at times. easily pressed in just make sure the beveled side points to the atty.
Last edited:
Yeah sometimes the battery contact will get pushed up too far in the switch housing and will pop the atomizer contact out. All you have to do is set it back in the housing, making sure the beveled side is facing up towards the atomizer.
It shouldn't because the heat will stay in the teflon. It might get hot if you power vape on it though. Mine has not gotten hot in the adapter sleeve, not yet at least.
Was having some issues with the batt sleeve sliding up far enouph to make contact with the switch, So I cut some 3M carbon vinyl into strips and applied them in several grooves in batt sleeve, much better grip..what a difference! You guys should design custom battery sleeves for each model and incorporate some kind of gripping in grooves..er sumtin lol
Man, I really do love this thing!!
Man, I really do love this thing!!
Last edited:
We do have EA (end activation) main bodies for the UltraMax. We designed them for people that have a hard time sliding the battery sleeve up. You can find them here: Alpha UltraMax Main Body-EA: Your source for the best electronic cigarettes / personal vaporizers in the world.
I recommend a redesign of the 306 sleeve with the lip about 2-3 mm deeper so regular dts work and the True-flow DT can be applied a little deeper into the sleeve Mine currently falls off with little force and afraid of loosing the metal true-flow DT that I like so much Thank you!!
Mine currently falls off with little force and afraid of loosing the metal true-flow DT that I like so much Thank you!!- Status
