4wick Vision Grande 6ML ..Has anyone tried this one yet?

[mekks]

4wick Vision Grande 6ML(canvape has it on their site) Has anyone tried this one yet? Or know if Mindfield has done a review on it?

Thinking of getting this on my next purchase, but was hoping for a little bit of feedback on it. Thanks

 

[Toronto_Mike]

4wick Vision Grande 6ML(canvape has it on their site) Has anyone tried this one yet? Or know if Mindfield has done a review on it?

Thinking of getting this on my next purchase, but was hoping for a little bit of feedback on it. Thanks

Got a LR clear on Friday, been using it since. First off the bat, great clean taste with reasonable vapour. Mine was leaking a little on top - the filler cap wasn't aligned straight & completely pushed down enough. Since setting it, the leaking has slowed down.

Took about 20 puffs to fully wick out the harsh dry hits. After that worked, pretty good for about 3ml.

Next day, some harsh hits again & wicks started to work again, today I now have some gurgling/flooding.

It has only been 48 hours with use & things could change but I'm not going to hold my breath.

Others may have more favourable results & I wish them so.

I didn't have high expectations & $10 isn't going to kill me, so verdict, so far is to wait for the Star Dusts or try something else.

Just my 2c.

 

[mekks]

Thanks for the feedback , sounds like its a bit more hassle then its worth. I'll wait for the stardust, pretty sure I already put that on my wish list with canvape.

 

[MadValleyVapingMama]

Hmmmm. That's disappointing TO_Mike

I have one coming Monday or Tues. Hoping I don't end up with another trinket to ad to my drawer of stuff I don't like/want.

I can't wait to get a Star Dust. I hope they work the way they look.

 

[Toronto_Mike]

I really don't want to discourage anyone from trying them as results may vary depending on ratios of pg/vg & frequency of draws as well as the draw itself whether you pull in slowly or a quick harsh pull. Insert joke here. For the record, I was using e-juice from MLV(Joosy Fruit) & tend to have a quick harsh draw.

Clearomizers may "not be my bag, baby".

 

[Mindfield]

I have a couple on the way next week, should probably see them around mid-week, so I'll put them to the test.

 

[martinc]

I am using one on my VV box mod at 4.5V,no gurgling,no leaks but some condensation issues..well,not really an issue,its normal really.

No dry hits at all,I filled it exactly with 6ml of liquid and been vaping it no problems.

In fact,it need a refill

 

[Toronto_Mike]

I am using one on my VV box mod at 4.5V,no gurgling,no leaks but some condensation issues..well,not really an issue,its normal really.

No dry hits at all,I filled it exactly with 6ml of liquid and been vaping it no problems.

In fact,it need a refill

Are you using the SR version? I was using the LR & flipped it on/off with the ego booster to see if there was any difference. Booster at full would give dry hits. Half way seemed better.

 

[zer0ith]

I've been using mine since Friday night on the LT. I started it at 3.7v and am now up to 4.7v and working great. IMO looks great on the LT as well.

My only complaint is the mouth piece, I would like it to be a tad taller and see the same sort of underside as the Vision mouth pieces.

 

[martinc]

Standard res (which reads 3.0) is more suited to higher voltage

Low res reads 2.2 and wuld be better with lower voltage

 

[MadValleyVapingMama]

I'm loving my Vision Grande so far. No dry hits or leaking, great flavor & vapor.

The mouth piece could use a bit of reworking, mine sits on there pretty loose. I can see crawling around on the floor trying to find it if/when it falls off

 

[KevinT]

I got mine in the mail too this morning, and I've got to say that it's working half decent so far. I'm using some pretty bad PG juice that came from China with an old order, so the taste has a hint of plastic in it. I can chock that up the juice I think, which might not be so bad.

Good vapor production and stops tasting burnt after the first 10-20 pulls.

My issue is really with the leaking from the bottom...it's slow but eventually I end up with juice on my finger...especially when I'm using a 510 to 901 converter to put it on my Riva.

If anyone know how to correct this, it would be appreciated.

 

[zer0ith]

I got mine in the mail too this morning, and I've got to say that it's working half decent so far. I'm using some pretty bad PG juice that came from China with an old order, so the taste has a hint of plastic in it. I can chock that up the juice I think, which might not be so bad.

Good vapor production and stops tasting burnt after the first 10-20 pulls.

My issue is really with the leaking from the bottom...it's slow but eventually I end up with juice on my finger...especially when I'm using a 510 to 901 converter to put it on my Riva.

If anyone know how to correct this, it would be appreciated.

Check that your cup seal is seated correctly. If its pulled up a tad it will cause leaks

 

[KevinT]

I've actually aligned it perfectly, took me forever. I'm thinking it might have something to do with not filling it via the holes, the pressure of putting the cap on after filling, etc.

I'll have to put it away and try again when I can get get a proper bottle for filling this.

 

[zer0ith]

I've just been using a syringe. Just have to make sure that after pulling it out I don't move the cup seal

 

[KevinT]

Yeah, that's what I figured. I'm a noob with these sorts of things...well, noob in general, just got back in to vaping after failing with a mini last year.

Anyways, I filled it FIRST and then put the cup seal on after. I'm thinking this caused the liquid to force out the battery end.

 

[zer0ith]

Definitely quite possible. Have you tried blowing it out and letting it sit?

 

[MadValleyVapingMama]

Hey Kevin, you should be able to get a syringe & needle at the drug store