510 adaptor what is the correct way to screw in?

[metapuff]

noticed that if i screw the adaptor to the buzz all the way first then the atty next, there is a gap between the adaptor and atty

but if i screw the adaptor to the atty first then to the buzz it doesn't go down as far and there is a gap between the adaptor and the buzz

 

[Hyperspace]

noticed that if i screw the adaptor to the buzz all the way first then the atty next, there is a gap between the adaptor and atty

but if i screw the adaptor to the atty first then to the buzz it doesn't go down as far and there is a gap between the adaptor and the buzz

I've used the adapter both ways and it works either way, so I don't think there is a correct way. I have a VP2 and that's a different story. It would only work if you screwed the atty into the adapter first .

 

[WitchWay]

I screw the atty or carto into the adapter first then onto the Buzz. If the bottom of the adapter touches the top of the Buzz it triggers the short protection when you try to use it.


Happy vaping!!!

 

[BuzzKill]

I go 1/2 way , I have never had it short ?????
HUmmmm

 

[WitchWay]

I go 1/2 way , I have never had it short ?????
HUmmmm

On my original screw I had one adapter that when it screwed on it went all the way down until it touched the top of the Buzz, it didn't stop. If I put a carto or atty on it, then hit the button, the short light would come on. If I put the atty or carto on the adapter first then screwed it on the Buzz that didn't happen. Since hubby changed the screw it doesn't happen anyway but I just got in the habit of putting the carto/atty and adapter together first before putting them on the Buzz.

Happy vaping!!

 

[BuzzKill]

I need to find a better adapter ? well 510 caps will be out in a week so ??

 

[paco]

really? in a week or soo, guess im gonna take my package back to the mail office and tell them i didnt order anything from you, then when you get it switch out the 901 buzz and the adapter and put a silver 510 buzz back in and ship it back to me

just kidding, im planning on getting a 2nd one anyways, one for heavy vaping at a lower volt around 4-4.5v, and another for my everyday vaping, around 5v, and if the caps can be switched out easy then ill order a 510 cap for my first one so i dont have to fiddle with those tiny adapters that when dropped are a pain in the A to find.

 

[BuzzKill]

I should have been on the 510 connection much earlier but I was swamped just getting the unit out and available ( only 1 guy here so ? )

SOOOOOOON= 510

 

[paco]

hey no problem, I will rather wait for something that is built or made good rather then have something rushed. like my Joker, i think that was rushed and its already KIA,

 

[mixitman]

What will be involved with swapping out 901 for the 510? I still haven't pulled the top off mine yet! I'm paranoid to jack something up and be without my Buzz! LOL

Also, have you got enough coming in to sell them separate or are they just going on new orders?

 

[BuzzKill]

They will be available separately for replacement , only the first orders say below 30 will not be able to replace them at home ( they were soldered connections ) the current Buzz's use a small ring terminal for the wire and screw into the bottom of the connector.

I will make a short video showing how to do it correctly

 

[WitchWay]

Well I have one of the few under 30, but won't be changing my cap out, so that's 1 you don't have to worry about I'll just wait until you make a purple one then get it with a 510 connection and have one of each

 

[BuzzKill]

Man you and purple !! I will talk to a local anodizer about some specials

 

[Hyperspace]

Man you and purple !! I will talk to a local anodizer about some specials

If you had purple my wife would have wanted that color too. I'm sure you'll sell plenty of them once you get them.

 

[ejoker]

They will be available separately for replacement

+1