510 AVS connector

[imeothanasis]

tomorow I will send to MX and harpo the new tanks totally free. I will do the same for you Rock.

I am glad that finally we found our way Rock. And I never forgot you. I just saw your last post on another older thread but you never responded again. You said that you will try again with AFS but I had no news from you. Thats why I was surprised by your post.

Send me your address and I will send you a new tank Rock. And I hope from now on we will have a nice friendship. Dont forget that I am trying always to make difficult things that no other people have ever try so we are all of us a kind of testers. Of course I cant make them for free but I always try to have low prices and send replacements to all my customers if something is wrong. I dont make squeezing bottles as you see.

 

[mwa102464]

OK Guys this is a picture of the exact Danco #67 O Ring for the bigger top cap, this will stop your leaking issues into the bottom tank..!

 

[Viktro D'Vaping]

OK Guys this is a picture of the exact Danco #67 O Ring for the bigger top cap, this will stop your leaking issues into the bottom tank..!

Thank you MWA!!!

 

[mwa102464]

Thank you MWA!!!

Your welco Viktro

 

[Rippspeed]

Telling you all DANKO O RING #67 ON THE BIGGER TOP CAPS SOLVES THE ISSUE, PLEASE TRY THIS FIRST IT WORKS I had the same dang issue so I went and bought almost every darn o ring I could, when I was at the home depot one day and you can also get every O Ring for your entire AFS/AVS from these Danco o rings

DAMM You !!! MWA; I've tried ever single HomeDepot in a 5 mile radius of my house and no luck... Man, I'm close to just having you send me 2 sets brotha... LOL

 

[Rippspeed]

unscrew a little the center post of 510 connector
screw atomizer
screw again the center post to make the contact

I like to seriously and personally apologize to Imeo Because my Dumb ... didnt do these steps correct. I didnt screw out the center post out enough... I guess thats the reason why my 510 carto was sitting kinked to one side...

My issues have been solve Imeo... Sorry for the issues I've brought about...

I dont really care for a newer AVS tank because I use nothing cartos and they dont leak. And I have 2 clear AVS tanks coming... So I'm good... Thank you

 

[Viktro D'Vaping]

I like to seriously and personally apologize to Imeo Because my Dumb ... didnt do these steps correct. I didnt screw out the center post out enough... I guess thats the reason why my 510 carto was sitting kinked to one side...

My issues have been solve Imeo... Sorry for the issues I've brought about...

I dont really care for a newer AVS tank because I use nothing cartos and they dont leak. And I have 2 clear AVS tanks coming... So I'm good... Thank you

Bravo Rippspeed!!! It really takes a BIG PERSON to admit when they are WRONG and it takes an EVEN BIGGER ONE, to do so publicly!!!

 

[mwa102464]

DAMM You !!! MWA; I've tried ever single HomeDepot in a 5 mile radius of my house and no luck... Man, I'm close to just having you send me 2 sets brotha... LOL

Ripp, Lowe's also has them, Ace hardware, and many others, go to the Danco O Ring website and they have a list of suppliers, if you cant find any this week after TRYING I will send you 2 of them, get back to me this coming Monday and if you have no luck I will send you 2 of the #67.... Home depot usually restocks on a weekly basis, I bet if you did the loop again they will have them it would cost me more to mail them then what you pay for a box of 20 of these hahaahhha let me know pal I have no problem sending if you can't locate them, the Home Depot will special order them for you too if you ask them to and call you when there in, take your whole AVS and you can get every size

 

[Rippspeed]

Bravo Rippspeed!!! It really takes a BIG PERSON to admit when they are WRONG and it takes an EVEN BIGGER ONE, to do so publicly!!!

Thanx Viktro;
that didnt make me feel better... Now I'm more embarrass... LOL

 

[Rippspeed]

Ripp, Lowe's also has them, Ace hardware, and many others, go to the Danco O Ring website and they have a list of suppliers, if you cant find any this week after TRYING I will send you 2 of them, get back to me this coming Monday and if you have no luck I will send you 2 of the #67.... Home depot usually restocks on a weekly basis, I bet if you did the loop again they will have them it would cost me more to mail them then what you pay for a box of 20 of these hahaahhha let me know pal I have no problem sending if you can't locate them, the Home Depot will special order them for you too if you ask them to and call you when there in, take your whole AVS and you can get every size

I didnt know Lowe's carries them... I'll check there... Reason why I didnt look at Lowe's because they didnt have it on their website...

 

[Viktro D'Vaping]

Thanx Viktro;
that didnt make me feel better... Now I'm more embarrass... LOL

No, YOU shouldn't be at all!!! I truly meant that as a very astute compliment!!!

 

[Zaiden]

I see more people are having the 510 issue I was having as well. Imeo, could it be possible that the old AVSv1 is the cause of this problem or are people with the new AVS having the issue as well? I'm just trying to isolate the problem to a key element here. I would love to be one of the lucky ones who are enjoying the 510 on the AVS, but at this point I have completely given up. I really want to make this work as I am not very fond of 901s and I hate cartos.

 

[mwa102464]

OK everyone I have figured out the real issue working with a GGTS/AVS user tonight. "TEFLON TAPE' If your leaking into your collector tank put about 4 wraps of Teflon tape around your connector threads, then turn your connector into the tank, this stops any air leaks around your threads an will then stop liquid from going into your overflow tank, it helps pressurize the system so give it a whirl, its a very inexpensive fix and I'm pretty sure this will work for all that might be having a problem.!

 

[imeothanasis]

I see more people are having the 510 issue I was having as well. Imeo, could it be possible that the old AVSv1 is the cause of this problem or are people with the new AVS having the issue as well? I'm just trying to isolate the problem to a key element here. I would love to be one of the lucky ones who are enjoying the 510 on the AVS, but at this point I have completely given up. I really want to make this work as I am not very fond of 901s and I hate cartos.

Its the tank Zai, connector is just fine.

 

[VPDownunder]

I got 2 of these in yesterday and have been trying to get them to work correctly. I have no leaking whatsoever, my problem is I tighten the adjustable nut all the way closed then back it off a tiny bit and it works great for a few puffs then the nut appears to loosen itself and I get increased flow then bad flooding of the atty, when I empty the juice out and remove the atty I find the nut has unscrewed itself about 3 turns. At this point I'm afraid it's back to 901's or turbo cartos again for me

 

[imeothanasis]

It is NOT turned when you screw it but maybe when you unscrew it VP, trying to see what is going on, so we dont really care. If you put ring in the right place when you screw the atty then you will vape normal. You saw my 4 videos, I vape more than ok 4 times. Its your tank as I see it. Do you use the AVS V1 and you have not changed the top o-ring?

 

[VPDownunder]

I've tried it in my V1's and my V1's with the clear tank, I've had no need to change the o ring as it doesn't leak at all so I can't see how that would be a problem but I'll try and get hold of one to try, I'll have to try and find the right size online though as the hardware shop in this town is worse than useless lol.

 

[imeothanasis]

Then the solution is simple VP. Dont open the ring so much. Dont open it by 1/4 but only a little. If you havent flooding then you have no problems at all. Only adjust the ring

 

[imeothanasis]

I hope you keep the main CR totally open, yes? If not, then close more the 510's ring

 

[VPDownunder]

Yep, the CR is totally open, I can't really close off the 510 ring any more though otherwise it's completely closed, I'm only backing it off a tiny amount but it still allows flooding to the point where I get a mouthfull of juice and that's just backing it off the tiniest amount. Like I said it seems to be fine for the first 5 or 6 puffs but then it's like it backs itself off and starts to allow more and more juice into the atty until it floods it.