don't give up man, that's an awesome
mod. we'll get you workin' it.
here's grimm green talking about your
mod:
https://www.youtube.com/watch?v=JtFZrIkDHnc
start at about 5min 10 seconds.
do you understand how to use your mod's variable voltage and variable wattage?
definitely learn how to change the watts.
know how to check your ohms of your atomizer?
What mg ejuice/pg/vg ratio are you
vaping? Harsh hits can be because you're using too high a mg count.
first let's make sure you're on a fully charged battery.
*don't screw your tank together too tightly, or screw it onto the device too tightly btw**
If you have a new atomizer head, let's go ahead and start fresh in case you've messed up the other one.
after you've filled your tank up, got your new atty head on (give it a few minutes of time to let the coil get wet from the juice, shake it a little bit if you want.), and get it on the device (don't screw it on super tight, just a little snug)
start with your wattage really low, about 5watts, then we'll gradually increase the wattage, to taste, until we get something you feel is a good vape.
what can help is before you take that first vape, give it a few dry pulls "suck in on the drip tip without firing the mod, do a few real sharp fast sucks without firing the mod just to help get a better hit to start)
be sure to be taking slow, long mouth drags, while breathing through your nose until you wait for your mouth to fill with vapor.
then go ahead and inhale.
Now if none of this is getting us anywhere, and if you're getting "burnt" or "dry" hits, we can try something called "removing the top wicks".
Here's a video i made a while ago about how to remove the top wicks from your atomizer to help eliminate dry or burnt hits. It's very easy to do (Evod and Protank atomizer heads are interchangeable and work the same way so don't be alarmed by the video title):
https://www.youtube.com/watch?v=g3D...ew-vl&list=PL9SeNx6gnMOlJSffRfhKxUEH-rFzsVd0g
