AFS feedbacks

[moog]

Hello again....Just tried the AFS and getting the same problems. My draw is quite hard to start with so that can't be the problem. I think the lasered hole hasn't quite gone through the atomiser. I changed my liquid to be really thin, changed batteries, changed position so the air hole is on the bottom and checked the atomiser which was working as it glowed hot when button was pressed. I draw really really strong and theres no vapour but I can feel the liquid is heating up inside the AFS.

 

[toshi]

Hello again....Just tried the AFS and getting the same problems.

Hi moog,
Do you have a bright flashlight?
You can check the state of the hole by using the flashlight.

 

[Lisaf01]

Sorry to hear that you're still having troubles Moog.
What type of cart/mouthpiece are you usin? Is it definitely not obstructing the atty hole?

 

[moog]

Hi moog,
Do you have a bright flashlight?
You can check the state of the hole by using the flashlight.

Thanks Toshi....I went into a dark room with my gg and atomiser, pressed the button, the atomiser lit up and I can see a very very small hole. Which makes it more a conundrum...

 

[moog]

Sorry to hear that you're still having troubles Moog.
What type of cart/mouthpiece are you usin? Is it definitely not obstructing the atty hole?

No Lisa...its just the base of an RN...I just don't understand...

 

[Lisaf01]

No Lisa...its just the base of an RN...I just don't understand...

Does the atty work fine and properly on its own dripping - without the AFS?

I am stuck as to what to suggest next, Moog. Perhaps Imeo can suggest something?

 

[moog]

Does the atty work fine and properly on its own dripping - without the AFS?

I am stuck as to what to suggest next, Moog. Perhaps Imeo can suggest something?

Lisa it works a treat....LOL....I'm jinxed...

 

[toshi]

Hi moog,
Even if the liquid is put in under the thread, AFS is safe.
And, incline AFS about 10 times below when you inhale.
It went well for me when inhaling strongly and smoothly.

 

[moog]

Hi moog,
Even if the liquid is put in under the thread, AFS is safe.
And, incline AFS about 10 times below when you inhale.
It went well for me when inhaling strongly and smoothly.

Toshi I did all that...and I am a strong vaper I'm always getting liquid in my mouth from it....

 

[toshi]

Oh my Buddha...
There is a possibility of problem of the atomizer.
We should wait for the opinion of Imeo.

 

[moog]

I do appreciate the help Toshi and Lisa.... I think Imeo will know...

 

[imeothanasis]

Hello again....Just tried the AFS and getting the same problems. My draw is quite hard to start with so that can't be the problem. I think the lasered hole hasn't quite gone through the atomiser. I changed my liquid to be really thin, changed batteries, changed position so the air hole is on the bottom and checked the atomiser which was working as it glowed hot when button was pressed. I draw really really strong and theres no vapour but I can feel the liquid is heating up inside the AFS.

Moog, I saw an atty that had the mark of laser on it but the hole was blind!!! You are right, the laser didnt made all holes open. The reason is that he hit all the atomizers for same amount of time but some atomizers are thicker, so no hole. You took a blind hole atomizer for sure

 

[moog]

Yes I think so or its just not big enough to allow the liquid through....These atomisers are all hand made so each one varies. I tried a few of my 901/RN atomsers and each places the airhole in a different position.....No worries Imeo I'll wait until you have more atomisers in....

 

[imeothanasis]

Yes I think so or its just not big enough to allow the liquid through....These atomisers are all hand made so each one varies. I tried a few of my 901/RN atomsers and each places the airhole in a different position.....No worries Imeo I'll wait until you have more atomisers in....

sorry moog, I had to test all holes before shipping but I didnt knew that they were handmaded. I thought they were from a machine. All the next atomizers will be tested for sure.

I am really angry that you cant use AFS

 

[moog]

Don't worry Imeo......I'm in no hurry, better you know these things thats why we are beta testers.....My AFS goes together well, it doesn't leak...

 

[moog]

Just to add....I should have said that atomisers are assembled by hand.......

 

[imeothanasis]

thanks again moog for the understanting!!

Vapn said that I will find a way to face down the atomizer. Ok I found it but not for the Transformer. The solution to this is with GGTS. You can stop it anywhere with its telescope system

 

[imeothanasis]

Moog one question please my friend.

I saw a post and you were saying that you saw the hole of atomizer. You saw it from inside or outside the atomizer? If you saw it from inside, then AFS should work properly. If you saw it from outside only, then its blind

 

[vapn]

OK Today I am having flooding troubles... I seem to be getting too much juice in the atty... I was doing great last night but today it is a different story. I changed batts and that was not it. I think the atty is just getting weak already. I was really giving it a work out last night. I don't think it is keep up with the AFS today. I am thinking of going with 5v on the Prodigy to see if I can wake it up... I am scared to go with 6v in fear of blowing it... And as Lisa knows that is a heart breaking situation. imeo we need more atties...

 

[imeothanasis]

Vapn, do you remember that I said that after 2-3 days atty's hole will open? So you have flooding effect. When you see this, you turn it in the oposite way, (hole up), so no more liquid can come to the atomizer. When you see that most of liquid gone, then you turn it again.