AFS v2 Tips & Technical Help

Status
Not open for further replies.

Rippspeed

Super Member
ECF Veteran
Jun 18, 2010
842
144
Inland Empire
I said this so you can avoid burn taste. But the liquid in mouth needs the steps I told you buddy:)


I'll try when I get home Imeo ... Man, why cant all manufacturers be like you and actually back their products ... You sold me man ... If the AFS doesnt work out for me I still what to buy the GG Slim just because its just beautifull mod, plus I need a sweet looking 3.7volt mod
 

imeothanasis

Unregistered Supplier
ECF Veteran
Feb 13, 2009
47,882
34,510
Athens, Hellas
gg-goldengreek.com
I'll try when I get home Imeo ... Man, why cant all manufacturers be like you and actually back their products ... You sold me man ... If the AFS doesnt work out for me I still what to buy the GG Slim just because its just beautifull mod, plus I need a sweet looking 3.7volt mod

Thanks a lot Rip for your very kind words. You will never get dissapointed by me and I hope from my sellers too. I want to be the best team for my friends and customers.

Please inform me for your results:)
 

Rippspeed

Super Member
ECF Veteran
Jun 18, 2010
842
144
Inland Empire
Thanks a lot Rip for your very kind words. You will never get dissapointed by me and I hope from my sellers too. I want to be the best team for my friends and customers.

Please inform me for your results:)

Imeo; if you were a woman I would kiss you. your advise WORK !!! I'm in love with my afs v2. I cant wait till Rob @ vaporkings have your tips in stock. And I cant wait to try this out with emonty's carto mod!!!

I'm vaping liquid free from my mouth. And its vaping perfect with you GG i6 atty. Its hitting sooo hard. perfect vape and I apologize for ever doubting you.

Imeo, I'll forever hold you and your products in high regard from now. With manufacturers like you no wonder the vaping community has grow the way it has. Thank you once again ... for all your help...
 

mwa102464

Resting In Peace
ECF Veteran
Oct 14, 2009
14,447
12,564
Outside of the Philadelphia Burbs, NJ & Fla
Hey Guyz,

Another good trick I have been doing is to use a piece of the blue foam or filler tucked under the special Imeo tip, this stops any fluid from coming into the mouth at all, you know how you sometimes get a little bit, well with this it stops it for good and still vapes like the king of all GG mods.!!!
 

imeothanasis

Unregistered Supplier
ECF Veteran
Feb 13, 2009
47,882
34,510
Athens, Hellas
gg-goldengreek.com
Imeo; if you were a woman I would kiss you. your advise WORK !!! I'm in love with my afs v2. I cant wait till Rob @ vaporkings have your tips in stock. And I cant wait to try this out with emonty's carto mod!!!

I'm vaping liquid free from my mouth. And its vaping perfect with you GG i6 atty. Its hitting sooo hard. perfect vape and I apologize for ever doubting you.

Imeo, I'll forever hold you and your products in high regard from now. With manufacturers like you no wonder the vaping community has grow the way it has. Thank you once again ... for all your help...

I am very happy that you are ok my friend Rip! and I am so honored with your words. I will give my best for ever to my customers and friends:)
 

imeothanasis

Unregistered Supplier
ECF Veteran
Feb 13, 2009
47,882
34,510
Athens, Hellas
gg-goldengreek.com
Hey Guyz,

Another good trick I have been doing is to use a piece of the blue foam or filler tucked under the special Imeo tip, this stops any fluid from coming into the mouth at all, you know how you sometimes get a little bit, well with this it stops it for good and still vapes like the king of all GG mods.!!!

MWA, I had never a "liquid in mouth" issue with my tip, thats why I made it. And maybe the foam will have the opossite results than you think if it gets full of liquid after some time of use.:)
 

mwa102464

Resting In Peace
ECF Veteran
Oct 14, 2009
14,447
12,564
Outside of the Philadelphia Burbs, NJ & Fla
Imeo,

I still am getting a bit of liquid at times because I like to only open the CR a very little bit when I use the AFS just maybe a 1/4 turn and thats it especially at 6-7.4v. It creates more sucktion through the Atty but it stops any of the liquid that potentially can come through when I add this small piece of blue foam under the Imeo tip, Everybody doesn't have to do this im sure but for me it's just a little trick that I like to use since the lquid is strong mg I use and doeasnt taste so good but vapes great.!!
 

mwa102464

Resting In Peace
ECF Veteran
Oct 14, 2009
14,447
12,564
Outside of the Philadelphia Burbs, NJ & Fla
Hey Guys,

OK after finding my little trick with the blue foam on my AFS, I decided to experiment a little bit further with it. I'm now having the best vaping experiance with my AFS, better than ever before.!! I'm not sure how everyone uses there CR ring on there AFS but I like to use my AFS with the control ring just slightly open this gives me the most enjoyable vape, however I was still getting some juice coming up into the tip and in my mouth a bit since the draw is tighter like this. I put one piece of the blue foam over top of my Atty trimmed and cut to fit snug inside the top cap, then I would put on the top cap and tip, it worked great but after a while it got a bit wet. I decided to put a second piece now inside of my Imeo tip, the whole length of it, cut it the inside length and a bit thicker and took my tweezers and inserted it all the way up inside the tip, along with the second piece over my Atty cut to fit inside of the top cap.

Now with my CR open just a very little bit maybe a 1/4 turn it seems that theres more juice going into my Atty and the taste is OMG GREAT with nothing coming up into the tip and a great draw on the AFS and the juice is even better than it ever has tasted in my AFS. Sometimes I was loosing taste at 6v-7.4v while vaping, now no loss of taste at all, great vape and my personal experience is just awesome WAY BETTER. I'm just saying TRY IT, it might not be for everyone but for me it's best BY FAR.!! Try it guy's
 
Last edited:

Rippspeed

Super Member
ECF Veteran
Jun 18, 2010
842
144
Inland Empire
OK guys ... got a new problem ...

I'm not getting that much juice in my i6 atty... After about 10 to 15 hits, the atty seems to have run dry. After awhile the atty starts to run dry even when I'm all most close on the cr... And then I have to close the CR completely and take a a couple of hits to get juice back in the atty ... Is this the same you guys are experiencing ??? It get soo harsh for me ( TH hit wise) that I cant vape on any liquid after the atty runs dry... I have to put the afs away for a bit and vape on a carto for a few hours... How do I get more juice in the atty and keep her juiced up...



Basically heres the run down on what I do to set up the afs...
1) fill the afs v2 all the way to the threads
2) closed the top rings ( soo no liquid with spill out)
3) open the cr wide open and then take a few hits off that
4) start closing the cr to get more juice in...
5) end up drying the atty out with the cr pretty much close
6) open the top rings open again to let more juice in
7) close top rings and start over ( but the TH is sooo harsh... that it kills me)


I know I havent tried the carto in the afs yet ... I'll try to drill the cartos tonight and try the afs with the cartos...
 

vapn

Vaping Master
ECF Veteran
Jul 10, 2009
3,457
525
UK
Try another 901 atty. They are all so different in the draw department that the juice can't find its way to the atty. When they put the threads into the bottom of the atty there is a little cut out for the hole and if they don't get that lined up just right we get blockage. There are a few other things inside the atty that have to be lined up just right also. So just try another atomizer and you should see a difference.
 

imeothanasis

Unregistered Supplier
ECF Veteran
Feb 13, 2009
47,882
34,510
Athens, Hellas
gg-goldengreek.com
OK guys ... got a new problem ...

I'm not getting that much juice in my i6 atty... After about 10 to 15 hits, the atty seems to have run dry. After awhile the atty starts to run dry even when I'm all most close on the cr... And then I have to close the CR completely and take a a couple of hits to get juice back in the atty ... Is this the same you guys are experiencing ??? It get soo harsh for me ( TH hit wise) that I cant vape on any liquid after the atty runs dry... I have to put the afs away for a bit and vape on a carto for a few hours... How do I get more juice in the atty and keep her juiced up...



Basically heres the run down on what I do to set up the afs...
1) fill the afs v2 all the way to the threads
2) closed the top rings ( soo no liquid with spill out)
3) open the cr wide open and then take a few hits off that
4) start closing the cr to get more juice in...
5) end up drying the atty out with the cr pretty much close
6) open the top rings open again to let more juice in
7) close top rings and start over ( but the TH is sooo harsh... that it kills me)


I know I havent tried the carto in the afs yet ... I'll try to drill the cartos tonight and try the afs with the cartos...

You can also blow on the atty to clean it and then put it again inside AFS Rip. Blow air from the both sides of atty and then suck to its side hole. Wash your mouth and suck again. That way atty is totally cleared from liquid
 

sonabraham

Full Member
Feb 25, 2010
52
2
USA
I just received my new AFS v2. Using at 6 volts, 901 atty on a Silver Bullet. Worked great for about an hour then the switch on the Bullet blew. Took AFS apart cleaned, rechecked instructions and put it back together. This time with an Indulgence @ 3.7 volts. Again worked fine until I removed AFS and switched to 6 volts and a cartomizer. The switch on the Indulgence was gone before I even got started. Now I'm afraid to even touch the AFS.

I'm stumped. Any ideas?????
 

imeothanasis

Unregistered Supplier
ECF Veteran
Feb 13, 2009
47,882
34,510
Athens, Hellas
gg-goldengreek.com
I just received my new AFS v2. Using at 6 volts, 901 atty on a Silver Bullet. Worked great for about an hour then the switch on the Bullet blew. Took AFS apart cleaned, rechecked instructions and put it back together. This time with an Indulgence @ 3.7 volts. Again worked fine until I removed AFS and switched to 6 volts and a cartomizer. The switch on the Indulgence was gone before I even got started. Now I'm afraid to even touch the AFS.

I'm stumped. Any ideas?????

A short caused this my friend sona because of faulty atomizers. AFS is totally irrelevant with that. Maybe the switches were ready to die. Thats the problem with electrical or touch switches. They die very easy with the first short. I am really sorry friend but its not an AFS fault. AFS is so simple and so robost that cant cause a short in any possible way.


ps...... check those atomizers that you used on AFS. I am sure that their poles meet each other
 
Last edited:

Rippspeed

Super Member
ECF Veteran
Jun 18, 2010
842
144
Inland Empire
Rippspeed, I don't open the top o ring to allow more flow, I nearly close the CR and suck mouth piece to draw juice in then open the CR to continue vaping.


even doing this the TH is still super harsh ... The only way to fix it for me is to open the top 2 rings and start over ...

But, I fixed this by going to the emonty carto mod ... And its perfect the way I like my old analog cigarettes smooth with alot of vapor...
 

imeothanasis

Unregistered Supplier
ECF Veteran
Feb 13, 2009
47,882
34,510
Athens, Hellas
gg-goldengreek.com
even doing this the TH is still super harsh ... The only way to fix it for me is to open the top 2 rings and start over ...

But, I fixed this by going to the emonty carto mod ... And its perfect the way I like my old analog cigarettes smooth with alot of vapor...

:thumb::thumb:. Very nice Rip my friend
 

emonty

Flavor Junky
ECF Veteran
Verified Member
Oct 15, 2009
7,612
8,850
the Netherlands
even doing this the TH is still super harsh ... The only way to fix it for me is to open the top 2 rings and start over ...

But, I fixed this by going to the emonty carto mod ... And its perfect the way I like my old analog cigarettes smooth with alot of vapor...

Happy to hear you got it right!!! Happy Vaping my friend and don't forget :when you need help: your family will be here to support you all the way!!!
 

vapn

Vaping Master
ECF Veteran
Jul 10, 2009
3,457
525
UK
I just received my new AFS v2. Using at 6 volts, 901 atty on a Silver Bullet. Worked great for about an hour then the switch on the Bullet blew. Took AFS apart cleaned, rechecked instructions and put it back together. This time with an Indulgence @ 3.7 volts. Again worked fine until I removed AFS and switched to 6 volts and a cartomizer. The switch on the Indulgence was gone before I even got started. Now I'm afraid to even touch the AFS.

I'm stumped. Any ideas?????

What kind of adapter are you using to go from the 510 on the SB to the AFSs 901 threads? I think you are having issues with that adapter causing a short and burning out the switches. The AFS has no possibility of causing a short. It either has to be the adapter OR possibly a bad atty inside the AFS. Check the center pole of the atty and if it looks like the picture below then it is causing the problem. Check the adapter you are using to make sure it has a good gasket between the two poles.... If you over tighten this stuff you can cause problems like this without knowing it. Hope you get it figured out....

IMG_0202.JPG
 
Status
Not open for further replies.

Users who are viewing this thread