Ammit 25 RTA

[HenTheKing]

I lied i got leaking on the base where the 510s at any tips i cant ever catch it leaking just happens should i be closing juice control all the way when not vaping yeah looks to be on the air flow just turned it notices it there

Keep forgetting to close the jf when refilling

Yeah you should. It's happening to me as well at this very moment. Re-wicked the bloody thing three times this morning. I also had juice actually pooling in the 510 connection on my mod.

I contacted Geekvape on Facebook and showed them my wicking process step by step and the bottom of the deck (serial number) and the guy offered to send me a replacement deck if it leaked again. Useful for anyone who really does have a problem.

I'm not 100% convinced it's a fault, but something has been off the last couple of days. The more you know chaps/chapettes.



Sent from my iPhone using Tapatalk

 

[fifamymaingame]

Haven't had it happen since closing thank the lord now its full blown open while i sleep to see

 

[markfm]

Since I wick right to the juice input ports, I check the wick when I open the jfc after filling. If I see any space, anything other than the wick tails, next time I'm due for a fill I'll unscrew the tank and reposition the tails a little. It's pretty rare, but an easy fix (I use a paperclip).

 

[fifamymaingame]

Loving this bad boy fixed my leaking issues was the chamber and deck not being as tight as it should of been

 

[janne303]

I sold mine... After buying Engine nano when it came out ive been testing ALOT of rtas and none has been as great as my nano!

Skickat från min SM-G935F via Tapatalk

 

[HenTheKing]

I sold mine... After buying Engine nano when it came out ive been testing ALOT of rtas and none has been as great as my nano!

Skickat från min SM-G935F via Tapatalk

What are you running in the Nano build wise, if you don't mind me asking?

All I got was muted flavour. Interesting how polarising some bits of hardware are!


Sent from my iPhone using Tapatalk

 

[janne303]

What are you running in the Nano build wise, if you don't mind me asking?

All I got was muted flavour. Interesting how polarising some bits of hardware are!


Sent from my iPhone using Tapatalk

I use 3.5 flat claptoncoil and its about 1mm from the top area and it tastes amazing. The cotton is like in the vaping with vic video (check it out on youtube)

Skickat från min SM-G935F via Tapatalk

 

[HenTheKing]

I use 3.5 flat claptoncoil and its about 1mm from the top area and it tastes amazing. The cotton is like in the vaping with vic video (check it out on youtube)

Skickat från min SM-G935F via Tapatalk

Yeah, tried that as well as a 4mm one. I found the best I got was when I blocked off the smaller airflow hole in the chamber. Still pretty bad.

Glad it's working for you. [emoji106]


Sent from my iPhone using Tapatalk

 

[markfm]

I liked the nano, but the Ammit does better for me flavor wise. Other than for having to be careful when setting up the wick tails (so no leaks), it's been an absolute pleasure to vape.

 

[janne303]

Not even the serpent smm beats my Engine nano... What am I doing? Haha

Skickat från min SM-G935F via Tapatalk

 

[fifamymaingame]

Just threw in a stapled by geekvape

So lately no matter the coil and how i wick if i draw past 2 seconds i taste burning cotton although the wick dont show it?

 

[markfm]

No help from the peanut gallery. I've had consistently good results with rayon in it, I only get a dry hit if I forget to open the jfc after refilling (what can I say - CRS [emoji5]).

 

[fifamymaingame]

Here is what im using at 65 watts im tasting burnt thought was the coil but not sure what to do im getting about 2.2 second draws before i taste it

 

[fifamymaingame]

Any ideas what it could be im not getting good vapor the fused clapton was alot better for flavor and production

After 2 seconds i just taste nastyness though it was the coil not juiced up enough but hasnt fixed it

 

[BlackCRX]

Any ideas what it could be im not getting good vapor the fused clapton was alot better for flavor and production

After 2 seconds i just taste nastyness though it was the coil not juiced up enough but hasnt fixed it

What is your resistance reading? I would assume it should be 0.15-0.16ohm
Did you dry fire it to make sure there is no hot spots?
Try lowering the wattage?
Try spacing them out?

 

[fifamymaingame]

What is your resistance reading? I would assume it should be 0.15-0.16ohm
Did you dry fire it to make sure there is no hot spots?
Try lowering the wattage?
Try spacing them out?

0.162
65 watts get burnt hits anything Lower no flavor no vapor well not to my liking

Defo did a dry pulse to get the spots out these things are hard to space out

I trimmed more wick off while its soaked and seems to fix it a bit

Yup that seemed to be the problem must of had to much wick in causing a flow issue

 

[fifamymaingame]

Someone show me a good premade coil

These frame stapled leave a nasty after taste in my mouth i feel like i taste nickel what ever fused clapton i has before gave me better experience but i don't like the shop i was in

I dont see my self learning how to wrap period i cant understand ohms law steam engine and vape tool confuse me and never work properly for me when messing with it

I just want great flavor with abilty to draw for a 3 4 seconds starting to think this tank isn't for me my throat hurts and all i taste is metal after using these frame stapled

 

[hittman]

I use 26/32 Clapton wire in kanthal mostly but have some in stainless also. I like mine at 4/5 wraps spaced. You can get a tool that is stepped for a couple dollars. I make most of mine at 3mm. I think I got mine from one of the china stores but here's one that's not bad priced in the US.
Micro Coil Jig

 

[hittman]

I just realized that MVS is out of stock. Here's another one.

Amazon.com: DIY Coil Tool - Micro Coils Jig: Arts, Crafts & Sewing

 

[Vaperx]

Not even the serpent smm beats my Engine nano... What am I doing? Haha

Skickat från min SM-G935F via Tapatalk

You have some crazy ... Nano from another world lol.

Sent from my Galaxy S8