Anybody Using A Kabuki?

[Moxienator]

No one here is required to reply to his posts, or agree with them. If you don't want to help, move on to the next post - but to tell him it's already been discussed and to read up is poor taste in my book, as well as unfriendly.

Thanks to a few posters here, I am in a bad mood, most won't care in the slightest, but I am done for a while.

Sorry you feel that way. It wasn't my intention to be rude. Merely to point out that the topics he needed to read up on were a few pages back. IMHO, I pointed him to the information that could be read at his leisure. If you think that is a break of decorum/etiquette/manners then I apologize. I do however, completely disagree. Lets move on anyway?

 

[jwbnyc]

Thank you. I appreciate your taking the time to give me the back story on why people respect them and your personal experiences.

Oh and @Moxienator Rayburn indeed! I do like that drip tip. Do you fine
Does it enhances flavor? I once tried a long one but it killed vapor. Maybe good for planes and movie theatres!

And to explain again I'm really trying to keep up and proof read. If so,etching isn't gotten just quote or ask and I'll go fix it. I can't really help what's happening. It looks right to me when it goes out and even subsequently. Until it doesn't. Then I fix them.

I'm sorry about that but I don't want to sit around doing nothing until surgery cuz I get word jumble itis sometimes.

My boxer won't fire my kabuki for so,e reason. Period. Will not fire it. Shows it there but nothing happens. Never seen this before.

Adjust the hex screw.

 

[AstroTurf]

I'll try to isolate and not keep up anymore from this point on. Also the loss of function is new to me, like a mom or six weeks. And temporary. I haven't really adjusted at all I hammer away. Give it a look over. Seems fine. Post. Twenty minutes later realize I typed garbage. I will work on slowing down and really proof reading. I am excited about it all.

Like!!!

 

[jwbnyc]

There's kayfun's puzzler Raygun lol

Ha. I have a couple of those drip tips.

 

[AstroTurf]

Ha. I have a couple of those drip tips.

No Way...

I've always wondered what the draw was like?

Thanks, Jim

 

[jwbnyc]

No Way...

I've always wondered what the draw was like?

Thanks, Jim

it's slightly variable, depending on what bits you use but always in the range of kayfun MTL.

 

[h00ligan]

Adjust the hex screw.

Yah I have been. It's registering but it's not firing.

Hex screw too far in starts pushing out the insulator. Too far out it doesn't sit right., gets wobbly. In the middle it's registering even when I press the up down to refresh it reads the perfect resistance it just won't fire

Super weird. Never had this happen before. Mm listen all in really sorry I created such abler fiddle in here. Not wasn't my intention. I'll do my best from here on out to go slower and try to restrain more. If you can all cut me a bit of slack for typos and forgetfulness. I'd appreciate it. I'm excited by the kabuki. It's very nice. Id like to learn more about the provari.

I am getting s bit tired of coiling and I can't really do it any more for at least four months.

I need a small device to pair with the kabuki that is easy to pocket easy to care for. Fill and will allow me to stay off smokes. No probably need two of these setups. A second kabuki is probably going to be ordered sooner than later unless I can find someone who needs a gem rts or tai fun gt2.

Any suggestions for a mod to pair that fits small? And due to medical bills price is a factor. So if anyone is selling one let me know or I'll look for something. I just don't know how far back I should go. And thence have to adapt the kabuki as I just bought the 510. Perhaps I need to get hands on a provari to appreciate it fully. Certainly seems many in here find it the perfect combo. And you guys were right on the kabuki.

I really appreciate the patience and help. Thank you all sincerely.

 

[AstroTurf]

it's slightly variable, depending on what bits you use but always in the range of Kayfun MTL.

Thanks!

 

[AstroTurf]

Yah I have been. It's registering but it's not firing.

Hex screw too far in starts pushing out the insulator. Too far out it doesn't sit right., gets wobbly. In the middle it's registering even when I press the up down to refresh it reads the perfect resistance it just won't fire

Super weird. Never had this happen before. Mm listen all in really sorry I created such abler fiddle in here. Not wasn't my intention. I'll do my best from here on out to go slower and try to restrain more. If you can all cut me a bit of slack for typos and forgetfulness. I'd appreciate it. I'm excited by the kabuki. It's very nice. Id like to learn more about the provari.

I am getting s bit tired of coiling and I can't really do it any more for at least four months.

I need a small device to pair with the kabuki that is easy to pocket easy to care for. Fill and will allow me to stay off smokes. No probably need two of these setups. A second kabuki is probably going to be ordered sooner than later unless I can find someone who needs a gem rts or tai fun gt2.

Any suggestions for a mod to pair that fits small? And due to medical bills price is a factor. So if anyone is selling one let me know or I'll look for something. I just don't know how far back I should go. And thence have to adapt the kabuki as I just bought the 510. Perhaps I need to get hands on a provari to appreciate it fully. Certainly seems many in here find it the perfect combo. And you guys were right on the kabuki.

I really appreciate the patience and help. Thank you all sincerely.

Thumbs uP!!!

 

[Moxienator]

Mm listen all in really sorry I created such abler fiddle in here. Not wasn't my intention. I'll do my best from here on out to go slower and try to restrain more.

Don't worry about this ^

stay off smokes.

Do This ^

 

[gin828]

I tried 3 of the 5 VaporwerxUSA AP201 Nautilus BVC and well...... Its lipstick on a pig!!! The threading is nice, o-ring and insulator look good. First coil metered 1.5 on my meter and got the same on my ZNA. Started out at 7w flavor was a little funky but it had good vapor. I vaped a full tank at 7w then started to bump it up to 11w. Flavor got better but still had a funky backgound. Switched my Kabuki to a DX650 with a fresh battery and still got the funky background taste and it got worse as the battery drained. Second coil was pretty much the same experience but with different juice same background of funky that truly didn't care for. Third coil was shorted......

I was hoping that these coil would be at least on par with the Aspire Nautilus BVC but they fell way short. I see no point in trying the other two coils or recommending anyone to try them. VaporwerxUSA makes coils for other tanks and they might be solid performers but in my case with AP201 coils they are junk.....

 

[h00ligan]

I could have sworn Albee fiddle said kerfuffle sigh

 

[LittleBird]

I could have sworn Albee fiddle said kerfuffle sigh

It's ok. I read "Albee fiddle," and knew you meant something like "kerfuffle." Kerfuffle is a wonderful word

 

[DPLongo22]

I could have sworn Albee fiddle said kerfuffle sigh

Vanna, I'd like to buy a vowel please.

I'M KIDDING!!!

 

[gin828]

I'll try to isolate and not keep up anymore from this point on. Also the loss of function is new to me, like a mom or six weeks. And temporary. I haven't really adjusted at all I hammer away. Give it a look over. Seems fine. Post. Twenty minutes later realize I typed garbage. I will work on slowing down and really proof reading. I am excited about it all.

No worries dude

Just do the best you can......most of the posters in this thread are here to help and will go the extra mile to help you sort it all out.

 

[gin828]

FYI......The Spectrum Tanks glass drip tips fit the Kabuki

 

[Katdarling]

It does now... the first couple did not have that "feature" if the board was REALLY snug. At first I only did the ring if it needed it, now it happens to all of them. Because I like it

Welp. If ya like it....... Oh, oh, oh, oh, oh.



'Cause if you liked it, then you should have put a ring on it
If you liked it, then you shoulda put a ring on it
Don't be mad once you see that he want it
'Cause if you liked it, then you shoulda put a ring on it
Oh, oh, oh, oh, oh, oh



Sorry, Zen. It was "there".

 

[Yonjuro]

Just received the Dynasty drip tip and putting it through the paces

 

[LittleBird]

Cross posting, but figured this might be the better place ... A P3 Kabuki is registering 0 ohms on one P3. When I put it on a different P3, it registers 1.84 ohms. It was fine, earlier. What did I do to muck it up, and how do I fix it?

 

[Yonjuro]

and a close up