Anybody Using A Kabuki?

[Zen~]

I make sure the coil is very tightly mounted when I put it in the base, Zen. Since it's done it every time I go out I thought it was normal.

It's not at all normal, and this is the first case of this, so I'd like to figure it out!

You may have a bad O-ring or a hairline crack in the glass near the top. Also, when you invert the tank for filling, do you keep it inverted as you thread the top back on, or flip it back over to thread it?

 

[Katdarling]

I hope this is the start of manufacturers turning the corner and realising the power race is a race to no-where and finally acknowledging the flavour chasing tootle puffing section of the vaping community

+++++ 1.

One more question. What's "HTH"??

Hope that helps, Simply Red.

Wiggle it...

Just a little bit....

 

[classwife]

So...a few days into this Kabuki...

I need to get one with a 510 connection now - I love this thing !


You have no idea how happy this makes me !

 

[Moxienator]

If the base and threads have juice on them when you change the coil, it may leak... you need to make sure to wipe this area out with a vaper's towel.

 

[PamW]

Ok, I think it must have been improperly seated in the base. Thought I had it very tight but I just did another test and all was ok. Appreciate everyone's feedback!

 

[ChuffPuffer]

I need to correct one thing here... The Kabuki isn't ZenKoted™... there will be ZenKote versions available eventually, and a limited number have been made with the Z2 thread in Gun Metal ZenKote™, but in general, that's not a feature of the Kabuki at this time. The other stuff is right on the money, however.

Sorry, my bad. I got confused. The black ones are CeraKoted not ZenKoted. Good news about you making ZenKoted ones in the future though, at least that won't wash off!

 

[Zen~]

Sorry, my bad. I got confused. The black ones are CeraKoted not ZenKoted. Good news about you making ZenKoted ones in the future though, at least that won't wash off!

yeah, no foolin'

 

[ScandaLeX]

I find the air flow to be perfect for the way I vape. I can have it tight for a nice mouth-to-lung or when it's all the way open, gives the perfect (for me) restrictive direct to lung inhale with the supplied wide bore drip tip.

It actually took the guys at the B&M a bunch to finally talk me into one, I just didn't want to have to buy coils. I always wanted to get one of Zen's carto tanks though and before the Kubuki there was an adapter he made that retro'd the Nautilus coil into his Catro tank. What sealed the deal for me was when the guy at the B&M let me try his on a ZNA. Then, like I said above, I bought 1 then went back the next day for another lol...

Not sure about the juice but I believe it's 3, maybe 3.5 ml.

Don't want this to be a "gush fest" but I was really surprised with this atty. The only issue that I had was when my Ant mod tipped over (dang cat) on my desk and the quartz tank cracked. Since I use that mod as my daily carry, I replaced it with the stainless tank as pictured. I did also pick up another quartz tank too (for dress occasions ).

Don't stop! I like a good 'ole gush fest!



I just realized how old this ^^ post is. Don't mind me, I'll get caught up eventually.


Now onto page.....2


Sent from my i6S+

 

[MKID]

@Zen, are the green O rings for the Kabuki similar in color to the Tiffany colored P3?

 

[Zen~]

@Zen, are the green O rings for the Kabuki similar in color to the Tiffany colored P3?

No, they are more of a forest green. Tiffany is much much much more Blue

 

[jwbnyc]

So...a few days into this Kabuki...

I need to get one with a 510 connection now - I love this thing !


You have no idea how happy this makes me !

We have no idea what you're talking about.

 

[Zen~]

So.... ummmm... remember when I kinda said an adapter to put P3 attys on 510 mods was a silly idea?

I'm vaping on a prototype of a P3 atty to 510 mod converter that I designed last week. yep adds a little height, but... solves the issue... look for it to be for sale in about a month. I also designed a P3 atty to Z2 adapter as well... same time frame... ONE P3 Kabuki will fit ANYTHING

 

[ENAUD]

So.... ummmm... remember when I kinda said an adapter to put P3 attys on 510 mods was a silly idea?

I'm vaping on a prototype of a P3 atty to 510 mod converter that I designed last week. yep adds a little height, but... solves the issue... look for it to be for sale in about a month. I also designed a P3 atty to Z2 adapter as well... same time frame... ONE P3 Kabuki will fit ANYTHING

ANdddddd, ThAnK YoU!!!!!

I really do need one of those adaptors Sir.

 

[Brian Hille]

So.... ummmm... remember when I kinda said an adapter to put P3 attys on 510 mods was a silly idea?

I'm vaping on a prototype of a P3 atty to 510 mod converter that I designed last week. yep adds a little height, but... solves the issue... look for it to be for sale in about a month. I also designed a P3 atty to Z2 adapter as well... same time frame... ONE P3 Kabuki will fit ANYTHING

That's awsome! Thanks Zen. Any thought as to making a p3 connector to replace the 510 on the zna? Then you could use the zna without the adaptor. Only thing that could make it better would be a provari power board.

 

[Zen~]

That's awsome! Thanks Zen. Any thought as to making a p3 connector to replace the 510 on the zna? Then you could use the zna without the adaptor. Only thing that could make it better would be a provari power board.

In the post you quoted I mentioned the Z2-P3 adapter... yes, you'll be able to put a P3 Kabuki onto a ZNA directly Or any OTHER Z2 threaded PV for that matter.

 

[MKID]

No, they are more of a forest green. Tiffany is much much much more Blue

Do you carry something similar to the Tiffany, I am trying to put a Kabuki package for a friend that already owns the P3 Tiff.

 

[Peter_C]

I must mention a very kind ECF member that took the time and skills to make me two plastic tank setups~! One for a spare, and O-rings to go with them~! (due to my bad hands, there was no way I could do this for myself, and to date, I have broken five glass tanks) I am such a klutz!

I have the metal tank (again, thanks to another kind ECF member), but I tend to worry if I can't see my juice level. This is just perfect!! You can't even tell that it's not glass by looking at it either.

Also thanks to Stanley for bringing it up and listing various parts, links, prices

 

[Housedag]

So.... ummmm... remember when I kinda said an adapter to put P3 attys on 510 mods was a silly idea?

I'm vaping on a prototype of a P3 atty to 510 mod converter that I designed last week. yep adds a little height, but... solves the issue... look for it to be for sale in about a month. I also designed a P3 atty to Z2 adapter as well... same time frame... ONE P3 Kabuki will fit ANYTHING

Hi Zen,

Will this connector be available on the HoH site, and will you ship to Canada?

Tracy



Sent from my iPad using Tapatalk

 

[drugarth]

interesting, apparently Aspire will launch a new Triton mini, but the important part for us is that it uses Nautilus compatible coils, including some new ones:

Aspire - Aspire Odyssey mini kit

Wonder if these new coils will fit the Kabuki, and if so how they will perform

 

[Zen~]

Hi Zen,

Will this connector be available on the HoH site, and will you ship to Canada?

Tracy

Yes, and Yes, and I have not presented this to ProVape yet, but it seems like they might be interested in selling it as well... in either case they'll be available internationally at some point.