Apex BF Customs
- Thread starter Roscoe01
- Start date
- th_trl_thread_readers 0
- Status
Atomics and Cyclones. That's about all I can think of in that "mid-size" range.
And I agree - there should be someone else making 18's or 20's!
And I agree - there should be someone else making 18's or 20's!
Not to bring up the old Stump again, but shrink that down to 18mm, make the airholes a little smaller so there's no modification needed for restricted airflow, and that might be my favorite atty ever.
My Nectar didn't make noise first time I built it. I just reworked it and am getting an bit of a noise now. I thought I had the wick a bit thick and maybe it had balled it up some feeding it into the holes. Other than nicking the o ring when I first took the top off I like it a lot. The MantaV2, Chalice and Nectar are at the top for me (right now at this moment
) Gotta say my Atomic is never far out of reach and is always built and ready to go, it's still pretty darn good and I know it won't me down. I also like like the Vector closed up to 1 1/2 holes, plenty of flavor. Leaking is my big bugaboo. I take care of dogs, I gotta be able to stuff it in my pocket quick and not have to think about it. If they can't go to work, they aren't for me. Except the short tank Lancia and it is a stay home with my Woodvils cause they don't go out of the house.
I have a Stumpy too and I like it well enough, I didn't think it was the second coming. The air for me, shut down to the one hole both sides is ok (single coil on the side), but the AFC is a PITA to try to move and the dt adaptor thing in the top is a bit loose. I will shut it down more when I get home and can get dirty. Having to take it apart to make an adjustment doesn't cut it for me. It makes a bit of a noise too, but I will give it some time and see if it stays in rotation or goes down the road. It certainly is top quality. I try to give them all time for me to figure out. I don't rush any of them down the road before I try to get them right for me.
Roscoe, if you see a decent 18-20 ish type I'd sure be game.
) Gotta say my Atomic is never far out of reach and is always built and ready to go, it's still pretty darn good and I know it won't me down. I also like like the Vector closed up to 1 1/2 holes, plenty of flavor. Leaking is my big bugaboo. I take care of dogs, I gotta be able to stuff it in my pocket quick and not have to think about it. If they can't go to work, they aren't for me. Except the short tank Lancia and it is a stay home with my Woodvils cause they don't go out of the house.I have a Stumpy too and I like it well enough, I didn't think it was the second coming. The air for me, shut down to the one hole both sides is ok (single coil on the side), but the AFC is a PITA to try to move and the dt adaptor thing in the top is a bit loose. I will shut it down more when I get home and can get dirty. Having to take it apart to make an adjustment doesn't cut it for me. It makes a bit of a noise too, but I will give it some time and see if it stays in rotation or goes down the road. It certainly is top quality. I try to give them all time for me to figure out. I don't rush any of them down the road before I try to get them right for me.
Roscoe, if you see a decent 18-20 ish type I'd sure be game.
My Nectar didn't make noise first time I built it. I just reworked it and am getting an bit of a noise now. I thought I had the wick a bit thick and maybe it had balled it up some feeding it into the holes. Other than nicking the o ring when I first took the top off I like it a lot. The MantaV2, Chalice and Nectar are at the top for me (right now at this moment
I have a Stumpy too and I like it well enough, I didn't think it was the second coming. The air for me, shut down to the one hole both sides is ok (single coil on the side), but the AFC is a PITA to try to move and the dt adaptor thing in the top is a bit loose. I will shut it down more when I get home and can get dirty. Having to take it apart to make an adjustment doesn't cut it for me. It makes a bit of a noise too, but I will give it some time and see if it stays in rotation or goes down the road. It certainly is top quality. I try to give them all time for me to figure out. I don't rush any of them down the road before I try to get them right for me.
Roscoe, if you see a decent 18-20 ish type I'd sure be game.
If the Stumpy ends up needing a new home, you know where to find me.
For a day or so. I received it in trade and sent it packing with a Mini 2.1 before ever using it. Not the most refined machining but not terrible for the price. Mark Todd did a pretty thorough review of it on YouTube.
Saw that, looks like he made it way more complicated than it has to be...
I may have found a new 18mm rda for us to try! Waiting to hear back from the manufacturer.
I thought about the hellfire viper but can't see any clones or speed which is a very well respected rda
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I have the big brother which is called aventador. It's a Fantastic atty but fiddly to build. It's built to be a budget friendly authentic..
I have a mephisto coming, straight off the OG Avion,
as close as I've come so far to the Avion, getting closer....closer
Thanks Ross
as close as I've come so far to the Avion, getting closer....closer
Thanks Ross
Still a few left not spoken for[emoji6]
Forge v2
1: element77...paid...shipped
2. Robbieblood
3. Evil Speakers..paid..shipped
4. Loopy1224
5. RiverNut..paid..shipped
6. Papa_Lazarou..paid..shipped
7. Walter Ego
8. NatGasMan..paid..shipped
9.
10.
Forge v2
1: element77...paid...shipped
2. Robbieblood
3. Evil Speakers..paid..shipped
4. Loopy1224
5. RiverNut..paid..shipped
6. Papa_Lazarou..paid..shipped
7. Walter Ego
8. NatGasMan..paid..shipped
9.
10.
Buhawi interest list (10 on the way)
1- marshallb... copper for the avion
2- roscoe01 ...copper
3. Robbieblood ...SS
4.AllPepperS.....copper
5. element77......brown (interesting)
6. RiverNut...copper
7.
8.
9.
10.
Note: 4 copper, 1 brown, 5 SS ordered
1- marshallb... copper for the avion
2- roscoe01 ...copper
3. Robbieblood ...SS
4.AllPepperS.....copper
5. element77......brown (interesting)
6. RiverNut...copper
7.
8.
9.
10.
Note: 4 copper, 1 brown, 5 SS ordered
- Status
Similar threads
- Locked
- Locked
