I got a bad batch of Cannons apparently. Sent an email for return authorization last week. Crickets. 
Are your 510 Cannon's leaking? Let us know!
- Thread starter Iken
- Start date
- th_trl_thread_readers 0
- Status
I happen to like mine, and the leaking doesn't bother me. don't have to fill up as often since the catch cup holds some of the juice, and i find as i draw on mine it sucks the juice up to coil. only thing i could ask for is more ohm options =D i like to rotate my atties and having 4 or 4.5 ohms for fresh batteries and being able to exchange them out as the batteries drain for the 3.5's would be nice. (of course i could always buy a VV device or a 5 volt mod, which I'm sure i will eventually so its not really a big deal)
I was wondering what's up with these too.I sent them a message a while back just asking if I could trade my leaking ones in for different ones and got ignored also.
I've had my Canon for a while now, and yes it weeps a bit at high voltage, but it's not a bad vape. I finally finished my writeup on it here Ikenvape 510 LR Canon Stealth: Impressions to view it with pictures and formatting
The text from the review is pasted below if you would like to save a trip
Lately, after doing a number of atomizer reviews it seems I've been warming up to atomizers lately. My electronic cigarette can be seen sporting the devices a little more frequently than before. The latest atomizer I have been toting around is the 510 LR Canon Stealth from Ikenvape.
Design
Canon compared to standard 510
The Canon is part of a new atomizer trend - hybrids. Hybrids basically take the good parts of two different atomizers and do a mashup to in theory provide one good atomizer. IkenVape's take on that is to combine 510 threading and an 801 atomizer and add a little bit of a twist.
Ike's Stealth is actually fatter than a standard 801 on the bottom and tapers up to the normal size. This allows for more room inside for the components. The extra real estate was put to good use. The bridge in this thing is enormous and features plenty of extra steel wool. The end result is a dripping atomizer that can handle a lot of juice at the same time (about 12 drops to prime and 4-6 drops to top off in between).
The general design of the casing is top notch. Unlike many other black e-cigarette atomizers, the finish on the IkenVape model is not a black sticker. These atomizers are powder coated with a nice glossy black finish. While more durable than a sticker, the paint will chip and flake off in small spots if you are rough with it. IkenVape and the resistance rating (2.5 in my case) are etched into the coating. No mistaking what atomizer you have adorning your e-cig in this case.
Atop the atomizer itself is a rubber tip. The tip tapers down to a very thin mouthpiece. I actually enjoyed using that mouthpiece, but removing it every time I needed to re-up my drops got old really fast. Unfortunately, when I ordered my atomizer, I didn't realize it required 801 drip tips because I apparently don't pay attention as it is clearly mentioned on the product page.
I spent several days using the factory tip while I was waiting for a suitable drip tip to make its way to me. I found that after a while, the constant removing and reinsertion of the tip did a pretty good job of chewing up the rubber where it connects to the atomizer. The tip still functioned perfectly, but it looked like my dog got ahold of it.
Performance
Good looks are nice, but the real question is how does it vape? I loaded up with my cherry tobacco juice and put it through its paces on a few different electronic cigarettes. I used a few different electronic cigarettes to see how the performance would vary. One thing I noticed right off the bat was that the draw would change depending on what e-cig was in use.
Huge wick and extra steel wool
The draw on the Canon is quite airy to begin with, however, on a standard eGo battery, the draw was entirely too airy. On the Lea and the box mod, the draw tightened up because the bottom of the atomizer sat flush with the connector and there were no air gaps on those models.
I sort of ruled out the eGo as a valid test platform (and the Revolution where the Canon just wouldn't work at all) and focused on the Lea and the generic variable volt box. The 2.5 ohm atomizer is recommended for 3.7-5v so the Lea is probably a little bit under powered for the job. Still, performance was not bad with decent production and flavor.
Performance really shined around 4.5v to 5v. Decent performance all around, and even at higher voltages running a little dry wasn't a major catastrophe. At higher voltages I've found many atomizers make your life miserable if you let them get dry. You're treated to a nice, dry hit that will have you hacking up your gall bladder. The Canon more or less gently reminds you its time to add a little more goodness.
The opposite end of the dripping spectrum is where things start to break down on the shiny, black wonder. At higher voltages, certain models of the Canon have a tendency to leak from the battery connector. My 2.5 ohm Canon was one of those unfortunate models. At lower voltages on the Lea, I did about 6 drops when I re-dripped. At 4.5v and above on the box mod I would find myself with little juice slicks on the mod after the atomizer warms up.
IkenVape is aware of the issue and they have a thread on ECF about the subject. They are looking into a fix, but in the interim if you happen to get one of these fickle atties, you'll want to turn the heat down a notch or be a little more cautious in your dripping activities.
Too Long; Didn't Read
The IkenVape Canon is a handsome and durable atomizer put together by combining an oversized 808 body and engine with 510 threading. The large capacity ensures less frequent grabs at your favorite juice bottle. The 2.5 ohm like many IkenVape products performs decently at lower voltages but really gets its groove on when you turn up the heat a little. Unfortunately, some models experience a leak issue with higher voltages, which has me looking forward to a revision of this model in the near future.
Performance:
Draw: loose to very loose
Vapor Production: Good
Throat Hit: Excellent
Warmth: Moderate to Warm (depending on voltage)
Pros:
Very attractive
Durable finish
Large capacity
Good performance
Cons:
Uses 801 drip tips, despite 510 threading
Loose draw
Some models have leaking issue
Details:
Product: 510 LR Canon Stealth
Vendor: IkenVape
Price: $7.99
Threading: 510 (801 body)
Resistance: 2.5 (available in other levels)
The text from the review is pasted below if you would like to save a trip
Lately, after doing a number of atomizer reviews it seems I've been warming up to atomizers lately. My electronic cigarette can be seen sporting the devices a little more frequently than before. The latest atomizer I have been toting around is the 510 LR Canon Stealth from Ikenvape.
Design
Canon compared to standard 510
The Canon is part of a new atomizer trend - hybrids. Hybrids basically take the good parts of two different atomizers and do a mashup to in theory provide one good atomizer. IkenVape's take on that is to combine 510 threading and an 801 atomizer and add a little bit of a twist.
Ike's Stealth is actually fatter than a standard 801 on the bottom and tapers up to the normal size. This allows for more room inside for the components. The extra real estate was put to good use. The bridge in this thing is enormous and features plenty of extra steel wool. The end result is a dripping atomizer that can handle a lot of juice at the same time (about 12 drops to prime and 4-6 drops to top off in between).
The general design of the casing is top notch. Unlike many other black e-cigarette atomizers, the finish on the IkenVape model is not a black sticker. These atomizers are powder coated with a nice glossy black finish. While more durable than a sticker, the paint will chip and flake off in small spots if you are rough with it. IkenVape and the resistance rating (2.5 in my case) are etched into the coating. No mistaking what atomizer you have adorning your e-cig in this case.
Atop the atomizer itself is a rubber tip. The tip tapers down to a very thin mouthpiece. I actually enjoyed using that mouthpiece, but removing it every time I needed to re-up my drops got old really fast. Unfortunately, when I ordered my atomizer, I didn't realize it required 801 drip tips because I apparently don't pay attention as it is clearly mentioned on the product page.
I spent several days using the factory tip while I was waiting for a suitable drip tip to make its way to me. I found that after a while, the constant removing and reinsertion of the tip did a pretty good job of chewing up the rubber where it connects to the atomizer. The tip still functioned perfectly, but it looked like my dog got ahold of it.
Performance
Good looks are nice, but the real question is how does it vape? I loaded up with my cherry tobacco juice and put it through its paces on a few different electronic cigarettes. I used a few different electronic cigarettes to see how the performance would vary. One thing I noticed right off the bat was that the draw would change depending on what e-cig was in use.
Huge wick and extra steel wool
The draw on the Canon is quite airy to begin with, however, on a standard eGo battery, the draw was entirely too airy. On the Lea and the box mod, the draw tightened up because the bottom of the atomizer sat flush with the connector and there were no air gaps on those models.
I sort of ruled out the eGo as a valid test platform (and the Revolution where the Canon just wouldn't work at all) and focused on the Lea and the generic variable volt box. The 2.5 ohm atomizer is recommended for 3.7-5v so the Lea is probably a little bit under powered for the job. Still, performance was not bad with decent production and flavor.
Performance really shined around 4.5v to 5v. Decent performance all around, and even at higher voltages running a little dry wasn't a major catastrophe. At higher voltages I've found many atomizers make your life miserable if you let them get dry. You're treated to a nice, dry hit that will have you hacking up your gall bladder. The Canon more or less gently reminds you its time to add a little more goodness.
The opposite end of the dripping spectrum is where things start to break down on the shiny, black wonder. At higher voltages, certain models of the Canon have a tendency to leak from the battery connector. My 2.5 ohm Canon was one of those unfortunate models. At lower voltages on the Lea, I did about 6 drops when I re-dripped. At 4.5v and above on the box mod I would find myself with little juice slicks on the mod after the atomizer warms up.
IkenVape is aware of the issue and they have a thread on ECF about the subject. They are looking into a fix, but in the interim if you happen to get one of these fickle atties, you'll want to turn the heat down a notch or be a little more cautious in your dripping activities.
Too Long; Didn't Read
The IkenVape Canon is a handsome and durable atomizer put together by combining an oversized 808 body and engine with 510 threading. The large capacity ensures less frequent grabs at your favorite juice bottle. The 2.5 ohm like many IkenVape products performs decently at lower voltages but really gets its groove on when you turn up the heat a little. Unfortunately, some models experience a leak issue with higher voltages, which has me looking forward to a revision of this model in the near future.
Performance:
Draw: loose to very loose
Vapor Production: Good
Throat Hit: Excellent
Warmth: Moderate to Warm (depending on voltage)
Pros:
Very attractive
Durable finish
Large capacity
Good performance
Cons:
Uses 801 drip tips, despite 510 threading
Loose draw
Some models have leaking issue
Details:
Product: 510 LR Canon Stealth
Vendor: IkenVape
Price: $7.99
Threading: 510 (801 body)
Resistance: 2.5 (available in other levels)
I got a bad batch of Cannons apparently. Sent an email for return authorization last week. Crickets.
Crickets? Ignored?? No way guys, There have been issues with the server's host and/or the current Cart in regards to email/orders. Would you please resend them so I can help you.
Everyrone, THANK YOU SO MUCH FOR YOUR INPUT!!! With all of your precise input, we have routed out the problem and now know how to remedy it. There was a major structure problem that is now addressed and will be taken care of. Thank you so much for helping us with this inconsistency.
Order 2649. I sent email through your trouble ticket system, regular email and posted here. Needing return authorization for stealth cannon attys. Opened one, tried it and contacted Ikenvape. Leaks and has burnt taste. I'm not a new vaper or dripper and don't believe it's operator error.
Iken,
Can we please return the used and unused for a store credit. I bought 2 of them before you left on vacation. I only used one so far for 5 hours and it leaked so much that I set it aside. So I have a brand new one and a used one that I would like to return for store credit to get something that works...
These 2 801 cannons 1.8s are sitting staring at me everyday mocking me...
Can we please return the used and unused for a store credit. I bought 2 of them before you left on vacation. I only used one so far for 5 hours and it leaked so much that I set it aside. So I have a brand new one and a used one that I would like to return for store credit to get something that works...
These 2 801 cannons 1.8s are sitting staring at me everyday mocking me...
Thats what i'd like to know too,of course the ones we have are used or we wouldn't know they have a leaking issue.I bought 4 of the 1.8's and 3 of the 4 leak very badly.I would also like the option of returning them for store credit or 3 of the new revised ones that have the issue solved.I order all my attys and carts from you and will continue to do so because your products and service are top notch.Also did you get my message I sent you from your website about my order #3260 that I just got?It was missing an item.Thanks.
I bought a bunch...I would feel really bad returning them. But I LOVE the Vape on them. Leakers for sure, but would love to know when new stock is in. I will order again if they won't leak. Absolute best atty ever for flavor and vapor.
Is their a way to mod the 20 I already have?
Excited the leaking will be fixed. Hurry with the new stock!
Is their a way to mod the 20 I already have?
Excited the leaking will be fixed. Hurry with the new stock!
Sent Iken a PM 2 days ago since maybe he does not check this thread a lot. No response so far...
He seems to take a while but always answers eventually......I'm sure between his business and regular life his free time is real limited.I can't wait until the fixed version is released.Any time frame on when the new ones will be for sale Iken?Thanks.
Hey guys! I'm here!
I'm usually encased in emails and phone calls all day everyday and manufactures by night. Work life is definitely conquering home life by far and lack of employees is creating stress with averaging 50-75 orders a day on average. Thank you for sparing hope Jkoppk as I will always get back the moment I can. Coming on to ECF is the greatest perk of the job. Being with everybody here is the daily goal as they are considered more like family than my own, save for the Missus and kiddies.
I'll hop on PM's right now.
I'm usually encased in emails and phone calls all day everyday and manufactures by night. Work life is definitely conquering home life by far and lack of employees is creating stress with averaging 50-75 orders a day on average. Thank you for sparing hope Jkoppk as I will always get back the moment I can. Coming on to ECF is the greatest perk of the job. Being with everybody here is the daily goal as they are considered more like family than my own, save for the Missus and kiddies.
I'll hop on PM's right now.
Hey guys! I'm here!
I'm usually encased in emails and phone calls all day everyday and manufactures by night. Work life is definitely conquering home life by far and lack of employees is creating stress with averaging 50-75 orders a day on average. Thank you for sparing hope Jkoppk as I will always get back the moment I can. Coming on to ECF is the greatest perk of the job. Being with everybody here is the daily goal as they are considered more like family than my own, save for the Missus and kiddies.
It's great to see you my friend even if only for a moment. I realize your under an extreme load and would like nothing more than to be here on a daily basis but alas life goes on. You are the inspiration for us all.
... send Fusionman to the rescue
On a side note it is always refreshing to see Isaac chime in
I purchased 2 Attys on 6/30 and just tried using the 2.5 last night. I had a terrible time trying to get it to not leak.
1.Voltage being applied-----------5V GLV2
2.Resistance of 510 Cannon-------2.5 ohm
3.Color of the 510 Cannon---------black
4. Ratio of liquid PG/VG percentages please----have tried several mixes same results
5. Flavor of liquid-----All RY4
6. Speed of leaking from filling----as fast as i put it in
7. How many drops before leaking-----seems like i can sometimes get away with 3 but any more and it runs right through
I'll try the 2.0 ohm Atty tonight and see how that one works.
1.Voltage being applied-----------5V GLV2
2.Resistance of 510 Cannon-------2.5 ohm
3.Color of the 510 Cannon---------black
4. Ratio of liquid PG/VG percentages please----have tried several mixes same results
5. Flavor of liquid-----All RY4
6. Speed of leaking from filling----as fast as i put it in
7. How many drops before leaking-----seems like i can sometimes get away with 3 but any more and it runs right through
I'll try the 2.0 ohm Atty tonight and see how that one works.
I have 1 of the 1.8ohm cannons and 2 of the 2.0 ohms. They all leak like crazy, but the vapor production and flavor are as good as any of the 801's that I've used. And having a 510 connection just makes it better. I'm going to wait a bit, but I will definitely try them again when he gets the bugs worked out.
On a side note. Ikenvape has the absolute best customer service of any company I have ever dealt with. Isaac is the man.
On a side note. Ikenvape has the absolute best customer service of any company I have ever dealt with. Isaac is the man.
[order2658]On 6/28 I purchased 5 of the 2.5's, and all of them leak.
[order3435] I purchased 9 Attys on 7/19 and just tried using the 2.5's...all 3 leak. I then switched over to the 2.0's on 3.7v and all 6 leak.
I used to buy Ikenvape, because as an experienced vaper, I'm done with tinkering and modding my gear. It just needs to work.
I tried:
condom seal
o-rings from home depot
filling an air hole with toothpick
[i broke down and ordered 510:510 connectors to try to salvage some of this]
Though I shouldn't have let this fester as long as it has, I'm disappointed in Iken's hardware here. I've burned so many calories (and paper towels) on these attys. I feel like I'm a beta tester for Iken, yet, I'm not getting my gear for free. I've gone back to my non-leaking-non-Iken-attys. I will check back here in a few weeks to look into getting a refund, or, as some of you have denoted, getting atty's that perform to the standards that Iken once sold.
[order3435] I purchased 9 Attys on 7/19 and just tried using the 2.5's...all 3 leak. I then switched over to the 2.0's on 3.7v and all 6 leak.
I used to buy Ikenvape, because as an experienced vaper, I'm done with tinkering and modding my gear. It just needs to work.
I tried:
condom seal
o-rings from home depot
filling an air hole with toothpick
[i broke down and ordered 510:510 connectors to try to salvage some of this]
Though I shouldn't have let this fester as long as it has, I'm disappointed in Iken's hardware here. I've burned so many calories (and paper towels) on these attys. I feel like I'm a beta tester for Iken, yet, I'm not getting my gear for free. I've gone back to my non-leaking-non-Iken-attys. I will check back here in a few weeks to look into getting a refund, or, as some of you have denoted, getting atty's that perform to the standards that Iken once sold.
- Status
