Aromamizer RDTA by Steam Crave

[Thespis]

all true ! but the picture don't tell me anything ...except its a vertical with a lot of cotton ??

Lol. It's really not that much cotton. I guess the photo is a little deceiving. It's 26ga, nine wraps, 2.5mm ID. Centered between the posts. The wick is split between the wells. Great flavor and way more vapor than the Lemos I had been using. I'm running naked (no bands) so airflow is definitely not an issue.

Sent from my LG-D851 using Tapatalk

 

[Landman]

Well, the last SS one I got before they temporarily went out of stock has the "H" down in the chimney, but is 100% identical to the ones that came directly from SC, all parts interchange/fit, and it passed the scratch and sniff... so if the black version comes out looking just like the current SS, I really couldn't care less. Now, if they look like the clone image in what @Badhabit8o8 posted, then we'll have a problem.

What's the most likely scenario - someone has made a perfectly identical 100% matched clone down to the threading so parts will swap and fit, as well as spoofed the scratch and sniff to pass, or Maggie wasn't aware they were able to get a shipment out to a vendor that apparently arrived to VNW the same day that their website listed they would arrive at the NYC warehouse? Or maybe she wants you to buy from them instead of a vendor because, you know, they'd make a lot more off the sale.

 

[Richu75]

I love Steam Craves customer service. I emailed them about my deck post breaking and they responded saying send pics. Well I did and they responded with a new deck is in the mail, no questions asked. I couldn't ask for a better experience dealing with them.

Yep, they are amazing in the customer satisfaction department. They sent out a second rdta without hesitation after my first wasn't deliverer after 6 weeks.

Maybe it will turn up someday.

 

[rolf]

Lol. It's really not that much cotton. I guess the photo is a little deceiving. It's 26ga, nine wraps, 2.5mm ID. Centered between the posts. The wick is split between the wells. Great flavor and way more vapor than the Lemos I had been using. I'm running naked (no bands) so airflow is definitely not an issue.

Sent from my LG-D851 using Tapatalk

hi thespis !
the reason I wanted to know is that I build a similar set up . 28 g 2.5 micro w 8 wraps .
your not kidding w the air flow ! to much for me . closed two side holes w sticky metal tape
good idea on splitting the cotton in the bottom .

 

[wabah58]

I have 2 authentic's, and 1 clone I got from Focal, think I paid $12 for the clone, as stated earlier, the clone isn't even close to a 1.1, I had to drill out all the fill holes to make them the same size of the authentic, switched the black oring to a clear oring from extras from authentic for the deck so it would get a better grip and stay in for refilling, the vape bands of clone are really bad, lol, so I don't even use the bands with the clone. Drilled one size bigger hole in deck for more juice flow. With those changes it chain vapes 80vg no problem. Took a few washes to finally get the tank clean of the machine oil. For $12 I expected to make some modifications to it. I run .29, at 55 watts with the clone, It preforms pretty good now, worth $12 for me The clone air holes lined up perfect for me, unlike my 2 authentics, which are about 1/4 turn off.

 

[Vapin Dave]

Wow, no clone for me then lol

 

[WharfRat1976]

I'm already sick of my Aromamizer and it's perfect perfect perfect vape. No more mountain to climb equals drepression....oh well. Such is the VapeLyph...

 

[Phone Guy]

Angel cigs has the aromamizer for $13.99 + shipping. Yep even the black one... Good luck!

Search results for 'aromamizer'

 

[pevinsghost]

Angel cigs has the aromamizer for $13.99 + shipping. Yep even the black one... Good luck!

Search results for 'aromamizer'

Those are the same clones as focalecig. I can tell by the vape bands and the fact the chimney is the same diameter all the way from bottom to top.

As @wabah58 pointed out, the SS ones can be modified to be usable with a little tlc. But I wouldn't trust that paint on the inside of the black ones to not end up coating my lungs.

 

[Landman]

Angel cigs has the aromamizer for $13.99 + shipping. Yep even the black one... Good luck!

Search results for 'aromamizer'

LOL... that says Aromamizer styled, so yeah, obvious clone.

 

[Vapin Dave]

Their customer service is so good, I want to buy more from them just in case I have a problem with anything lol

 

[rolf]

I'm already sick of my Aromamizer and it's perfect perfect perfect vape. No more mountain to climb equals drepression....oh well. Such is the VapeLyph...

wharfrat !
may be I should send you my statqualm clone ..never vaped.. because the juice runs out ...they forgot to put the orings in from the factory !! that will get you over your depression but you wont have any hair left either ..because you pulled them out
nawww I would not do that to anybody. have fun

 

[WharfRat1976]

wharfrat !
may be I should send you my statqualm clone ..never vaped.. because the juice runs out ...they forgot to put the orings in from the factory !! that will get you over your depression but you wont have any hair left either ..because you pulled them out
nawww I would not do that to anybody. have fun

LOL

 

[Uncletattoowhat]

I'm already sick of my Aromamizer and it's perfect perfect perfect vape. No more mountain to climb equals drepression....oh well. Such is the VapeLyph...

I also haven't been this "vape content" with any hardware so I find myself rebuilding it every few days just to have something to do.

 

[Impakto]

EDIT: I backread and saw posts about sanding the bottom. Does anyone have pics or a video showing how the sanding process should be the done?
---
Hi!

I have 2 Aromamizers (1 6ml and 1 3ml) - both having velocity decks. Out of the box, the 2 airflow holes of my 3ml is lined up perfectly with the coil area of the build deck and the other 2 airflow holes are lined up with the posts.

However, the airflow holes of my 6ml Aromamizer are not aligned--kind of making a V position with two airflow holes sharing one coil deck. Since I do vertical coils, I prefer using the 2-hole vape band and using the airflow holes that are directly in front of the coil. I get better flavor out of this setup.

QUESTION: Is there any way that I could re-align the AFC or build deck to get a direct to coil airflow experience using 2 holes?

 

[cigatron]

EDIT: I backread and saw posts about sanding the bottom. Does anyone have pics or a video showing how the sanding process should be the done?
---
Hi!

I have 2 Aromamizers (1 6ml and 1 3ml) - both having velocity decks. Out of the box, the 2 airflow holes of my 3ml is lined up perfectly with the coil area of the build deck and the other 2 airflow holes are lined up with the posts.

However, the airflow holes of my 6ml Aromamizer are not aligned--kind of making a V position with two airflow holes sharing one coil deck. Since I do vertical coils, I prefer using the 2-hole vape band and using the airflow holes that are directly in front of the coil. I get better flavor out of this setup.

QUESTION: Is there any way that I could re-align the AFC or build deck to get a direct to coil airflow experience using 2 holes?

PM'd you with sanding instructions. Check your inbox.

 

[Jamandre]

I'm interested too? Mind sharing the link to that or do we need a password.

Thanks in advance cigatron.

 

[Steve6181]

I also haven't been this "vape content" with any hardware so I find myself rebuilding it every few days just to have something to do.

lol..I thought I was the only one doing that. I've been rebuilding every time I rewick, just to have something to do.

 

[roxynoodle]

Why do you all think I have so many tanks? Its that first build that's the best part

That's what will be saddest for me if the hammer comes down. Wish I had access to a machine shop so I could create my own new attys.

 

[cigatron]

I'm interested too? Mind sharing the link to that or do we need a password.

Thanks in advance cigatron.

PM'd you with sanding instructions. Check your inbox.