Aromamizer RDTA by Steam Crave
- Thread starter roxynoodle
- Start date
- th_trl_thread_readers 0
- Status
I tried this^^ method and with some fiddling and cutting I got it to work. Thanks, this is much faster!
Sent from my SM-N910W8
I have the black Aromamizer with the delrin tip, it doesn't get hot from my experience..
Just got my black one in today. Rinsed it now waiting to dry. Trying figure what build to put in this one.
Ya I got verticals in the other two. Have Clapton in one. Titanium in other. Might do Clapton titanium in black one
Rayon is great for the Aromamizer but I also would like to recommend another wick that works really well if you have the occasional struggle with Rayon as I do... The cotton is called Drago, and it is unprocessed Egyptian Cotton. I'd say the flavor with this stuff is better than any other cotton by far and at least in the same league flavor wise as Rayon. Rayon will give you bigger hits and larger clouds but if you want something extremely easy to wick that is also an amazing organic cotton in its own right(better than Japanese)give Drago a try. All you do with this Egyptian is roll it up and pull it through... Whether you wick it tight or wick it loose it is still a good vape! While with Rayon if I make it too loose or the tails arent trimmed just so, Im in for dry hit city and get agitated being nicotine depraved! LOL, food for thought guys, the Drago is primarily used in the Dripper community but since the Aromamizer really is a dripper its a great wicking material to consider.
Vapemail just arrived with my Aromamizer.
Guess who's going to be busy?
Is this your first one?
i never use a DT with mine and im at 70w and all four airholes open, it vapes nicer with the 3mm id imo
A number of things can cause overly warm/hot drip tips. Not trying to be poopy here but it's almost never the drip tip's fault. Could be too much or too little airflow, too much or too little power, too high of heat flux, bad coil symmetry or underwicking.
Take a pic of your build (newly wicked) and shoot us some build specs, desired vaping wattage and airflow settings so we can help you get a more stable vape and cool that driptip down.
Not sayn that a delrin dt won't feel cooler, it will, but with a correct setup the metal dt won't get uncomfortably warm even at 100w plus.
It's all about maximizing the amount of vapor per watt applied that keeps things cooler.
Yes, my first dedicated RTA. Ever. Just did first build, dual vertical 2.5 Kanthals, 0.7ohms. Working on getting pictures uploaded.
To those that said 'go for it' when I asked about the Aromamizer, I can only say "Damm you, damm you all to hel! !!!"
Last edited:
Slight potato pic of first build:
Seven 2.5mm wraps 28g Kanthal, measured .72 ohms on my TC60 - was shooting for 0.7 so not bad.
Not pretty, but.. Dayum!! 40W with four air holes slightly closed off and it's kickin'!!
Santa needs to bring me that 150watt mod.. and a serious DIY juice kit!!
Seven 2.5mm wraps 28g Kanthal, measured .72 ohms on my TC60 - was shooting for 0.7 so not bad.
Not pretty, but.. Dayum!! 40W with four air holes slightly closed off and it's kickin'!!
Santa needs to bring me that 150watt mod.. and a serious DIY juice kit!!
welcome to the familyYes, my first dedicated RTA. Ever. Just did first build, dual vertical 2.5 Kanthals, 0.7ohms. Working on getting pictures uploaded.
To those that said 'go for it' when I asked about the Aromamizer, I can only say "Damm you, damm you all to hel! !!!"
Hey folks,
I picked up an Aromamizer today. Unfortunately the 2 post build deck Is stuck to the tank good and doesn't want to come off! The bottom plate comes off, but the deck is attached to the bottom part of the tank.
I don't want to force it as I havent even used the tank yet.
Any advice?
Thanks!
I picked up an Aromamizer today. Unfortunately the 2 post build deck Is stuck to the tank good and doesn't want to come off! The bottom plate comes off, but the deck is attached to the bottom part of the tank.
I don't want to force it as I havent even used the tank yet.
Any advice?
Thanks!
The negative post is one piece with the deck, so you can apply force to that one post.
I can't get at the posts. They are stuck inside the bottom part of the tank.
- Status
