Aromamizer RDTA by Steam Crave

[Bman123]

My rdta was in LA the 17th, it just updated and said it arrived at San Bernardino CA today at 5:41pm. I ordered it on the 11th.

I think I'll be lucky to get it by Monday

Sent from my SM-G900V using Tapatalk

 

[mr.fabe]

My rdta was in LA the 17th, it just updated and said it arrived at San Bernardino CA today at 5:41pm. I ordered it on the 11th.

I think I'll be lucky to get it by Monday

Sent from my SM-G900V using Tapatalk

Damn.. that sucks. Did steam crave ship it DHL Express from HK or was it shipped from NY?

 

[Bman123]

They shipped it from Singapore and I'm guessing it wasn't express because I'm on day 9 from when I ordered and it's across the country in California and I live in Ohio

Sent from my SM-G900V using Tapatalk

 

[jimmyw86]

Anyone have any tips to get the coils to align with the airhole? I tried moving it towards the negative post then the positive and the airhole always seems to hit the sides instead of directly in the front.

 

[Bman123]

Ok so my tank came today and this deck is tiny. It's saying 10 wraps of twisted 26g on a 2.4mm bit.
I ended up with 7 wraps on a 2.4mm bit, the coils are so small.

Sent from my SM-G900V using Tapatalk

 

[Bman123]

My coils don't align with the airholes like most of yours so it's getting hot at 80 watts. Any tips

Sent from my SM-G900V using Tapatalk

 

[Hanha]

Tip if you want to plug 2 airholes without vapeband. Just cut little pieces of an o-ring about 3mm thick and put them in to the holes.
No condensation like with the vapeband and looks better too

My favorite coil is dual vertical but those coils are bent in the middle in to "two" coils. hottest spot of coil is up in the middle. I´ve vaped that up to 160w and wicking was still keeping up fine.

I´ve had this about 2-3 weeks and my favorite atty of all time, so simple and functions well.
No leaks.

 

[Bman123]

I have to work on my wicking, I keep having one coil dry as can be

Sent from my SM-G900V using Tapatalk

 

[BagrX2]

Tip if you want to plug 2 airholes without vapeband. Just cut little pieces of an o-ring about 3mm thick and put them in to the holes.
No condensation like with the vapeband and looks better too

My favorite coil is dual vertical but those coils are bent in the middle in to "two" coils. hottest spot of coil is up in the middle. I´ve vaped that up to 160w and wicking was still keeping up fine.

I´ve had this about 2-3 weeks and my favorite atty of all time, so simple and functions well.
No leaks.

I think I get the coil design you are talking about but would you mind posting a picture?

 

[mr.fabe]

My coils don't align with the airholes like most of yours so it's getting hot at 80 watts. Any tips

Sent from my SM-G900V using Tapatalk

Go to double or triple twisted 28ga or 30ga. With twisted 26ga, it's going to run hot. Do you have all the airholes open?

 

[Bman123]

I fixed it, the positive screw backed out a little so it was hot legging really bad. It's fine now with all the air holes wide open at 100 watts.
Flavor is not even close to a rda, the vapor production is really good tho.
I'm using it at 80 watts to save on the battery some

Sent from my SM-G900V using Tapatalk

 

[SteveAdams86]

I have mine running quad vertical coils right now like discussed earlier here and wow! My vaporshark didn't have the balls to power it but my tube mech gets all those coils singing nicely. Nothing short of the best flavour and vapour iv ever had! Iv got a new goblin mini and Goliath v2 and let me tell you guys these don't even get close to the aromamizer. I'm going to work on them more to try and improve them but this tank really suits the vertical quad coil with the wick legs just sitting in bottom of the deck over the holes. Not even got close to a dry it and I have been using it a theoretical 126w in a mech with 4.2v having 0.14 ohm build and a vtc 4. Nothing short of absolutely stellar!

Sent from my Nexus 5 using Tapatalk

 

[roxynoodle]

I have mine running quad vertical coils right now like discussed earlier here and wow! My vaporshark didn't have the balls to power it but my tube mech gets all those coils singing nicely. Nothing short of the best flavour and vapour iv ever had! Iv got a new goblin mini and Goliath v2 and let me tell you guys these don't even get close to the aromamizer. I'm going to work on them more to try and improve them but this tank really suits the vertical quad coil with the wick legs just sitting in bottom of the deck over the holes. Not even got close to a dry it and I have been using it a theoretical 126w in a mech with 4.2v having 0.14 ohm build and a vtc 4. Nothing short of absolutely stellar!

Sent from my Nexus 5 using Tapatalk

I'm definitely keeping the quad verticals in this one . I feel it takes best advantage of the deck and airflow. We shall see what I decide when I buy a second Aromamizer with the new deck, although I may go quad horizontal on it, or I may go dual Claptons.

I did vape the quad verticals at 100W to try it, and the wicking kept up, but I'm using 60W in the morning, and 50W in the evening. I need to get some juice lower than 6mg for this atty though! Whoo!

 

[Btsmokincat]

I'm definitely keeping the quad verticals in this one . I feel it takes best advantage of the deck and airflow. We shall see what I decide when I buy a second Aromamizer with the new deck, although I may go quad horizontal on it, or I may go dual Claptons.

I did vape the quad verticals at 100W to try it, and the wicking kept up, but I'm using 60W in the morning, and 50W in the evening. I need to get some juice lower than 6mg for this atty though! Whoo!

I'm running dual claptons at the moment. For me it's really a toss up between the quad verticals and dual claptons. I'll switch back and forth between them as it needs rebuilding.

 

[SteveAdams86]

I'm definitely keeping the quad verticals in this one . I feel it takes best advantage of the deck and airflow. We shall see what I decide when I buy a second Aromamizer with the new deck, although I may go quad horizontal on it, or I may go dual Claptons.

I did vape the quad verticals at 100W to try it, and the wicking kept up, but I'm using 60W in the morning, and 50W in the evening. I need to get some juice lower than 6mg for this atty though! Whoo!

well for what its worth I can can tell you dual clapton did'nt work out so great on another dripper i own and that was 26g wrapped in 32g, Resistance coming around 0.4. The ramp up was too slow, too much wire to heat quickly enough and again that was using a mech. I honesltly think you would need atleast 150w for it to work as well as the quad coil

 

[Mazam]

They need to release the Velocity style deck already so i can finally order a second one.

Probably end up mostly retiring my drippers at that point too. Which says a lot for how good this tank really is. Going on a month now i think and not a single issue or leak.

Tried un-retiring my previous go to Lemo Drop last night to try a new flavor i whipped up, just because. There is no going back now

 

[roxynoodle]

They need to release the Velocity style deck already so i can finally order a second one.

Probably end up mostly retiring my drippers at that point too. Which says a lot for how good this tank really is. Going on a month now i think. Never an issue or leak.

I find tanks much more convenient. Coils and wicks last longer and you aren't constantly having to fill them

I like my squonkers, but otherwise only use drippers for trying new juice.

 

[Bman123]

I finally got it right. 26 gauge twisted 8 wraps on a 2.4mm bit. Vaping great at 90 watts. If I go to chain vape it or hit it longer then 4 seconds it will dry hit at 90 watts. If I go lower to 60 it doesn't dry hit.

Overall I'm liking this tank

Sent from my SM-G900V using Tapatalk

 

[davevape55]

Looks promising. Price not to bad either.

 

[Bman123]

Here we go again, dry hit central. For some reason my wicking isn't working for crap.
I remember watching the video and the guy was ripping it up to 160 watts and he was hitting it for a long time. If I go to about 4 seconds it's a dry hit.

Sent from my SM-G900V using Tapatalk