Aromamizer RDTA by Steam Crave

[tedigram]

I'm running all mine between 50-60W. I don't really care for higher than that. Try taking your finger off the fire button sooner and continuing your draw to pull out as much vapor as possible. If vapor is still coming out your drip tip after you take a puff, that would cause more condensation.

Yeah I had done that because it was habit from my subtank mini (helped delay the coil crud) but I stopped because the aromamizer was getting so much condensation regardless.

I did notice one time when I pulled the deck out to refill immediately after a few minutes of vaping that the coils continued to produce little wisps of vapor for a solid 90 seconds after the deck was out. Obviously that would cause condensation, but is that unusual? I mean, I know it's not like I've got an absurdly large coil in there, so it can't be that unusual.

 

[roxynoodle]

Yeah I had done that because it was habit from my subtank mini (helped delay the coil crud) but I stopped because the aromamizer was getting so much condensation regardless.

I did notice one time when I pulled the deck out to refill immediately after a few minutes of vaping that the coils continued to produce little wisps of vapor for a solid 90 seconds after the deck was out. Obviously that would cause condensation, but is that unusual? I mean, I know it's not like I've got an absurdly large coil in there, so it can't be that unusual.

For the kind of power we're putting to these things, and the large or multiple coils, and how well it wicks, I don't think its unusual. It would be more unusual if it was a Kayfun running 10W

 

[Zombo]

I did notice one time when I pulled the deck out to refill immediately after a few minutes of vaping that the coils continued to produce little wisps of vapor for a solid 90 seconds after the deck was out.

It's funny you mention that because the same thing happened to me and it freaked me out (never saw it before with any of my other attys). Without touching it, it kept smoking for like a minute!

It happened when I switched back to Kanthal ( I never dry-burned my Ti coils ). When I put in my first kanthal build, the deck was still wet from the previous build, so I assumed that it was just juice continuing to burn off since the deck seems to get really hot during my dry burns. Thing is, it hasn't happened since that first time, so, weird.

 

[Uncletattoowhat]

I was going to wait to order one until Friday, but some car parts sold on eBay and I had a little extra that I could justify using. Got it from vapordna. I'm pretty excited to build some of my standard nichrome80 fused claptons on it. I'm not expecting it to be a dripper killer, but I'm definitely excited to potentially retire my TFv4 and TCT.

 

[Haylon357]

Put 2 fresh wicks in my wife's tonight. Running dual verticals chiming in @ 0.5. Decided to toss a build in her other one. 22 gauge @ 0.2. I took the coils out and wicked them that way. Fluffed the fool out of them and BANG! There's the flavor! Before I was using dual claptons at 0.3 and the flavor was muted. So I'm scratching my head wondering if it was my wicking in the first place.

Sent from my VS986 using Tapatalk

 

[tedigram]

Put 2 fresh wicks in my wife's tonight. Running dual verticals chiming in @ 0.5. Decided to toss a build in her other one. 22 gauge @ 0.2. I took the coils out and wicked them that way. Fluffed the fool out of them and BANG! There's the flavor! Before I was using dual claptons at 0.3 and the flavor was muted. So I'm scratching my head wondering if it was my wicking in the first place.

Sent from my VS986 using Tapatalk

Do you mean you wicked the coils before you installed them on the deck? Also, was the second build vertical too?

 

[m00shie]

Wicking and coil positioning is the key factor to obtaining a great flavor.

I'm currently testing verticals and is seems very promising as I'm getting more flavors from it thus far.

 

[Haylon357]

Do you mean you wicked the coils before you installed them on the deck? Also, was the second build vertical too?

Bother builds were vertical. Yes, I installed the wick with the coils removed

Sent from my VS986 using Tapatalk

 

[Vapin Dave]

Yessss, mine has shipped

 

[duc916]

I don't get why anyone buys this tank directly from China when it's only $5 cheaper than eBay. I had it at my door two days after I ordered it (from AZ to CA), and got the satisfaction of stimulating my own economy.

 

[Mazam]

I don't get why anyone buys this tank directly from China when it's only $5 cheaper than eBay. I had it at my door two days after I ordered it (from AZ to CA), and got the satisfaction of stimulating my own economy.

When i bought mine they were including free DHL shipping, which made it to my door in a few days and before i would reasonably expect USPS first class to deliver on. Plus ordering direct usually offers more piece of mind in regards to getting a dud/pos then Ebay sellers have to offer.

That said i usually prefer to order from US vendor sites if/when i can, even if it means spending an extra $5. I'm certainly sitting here wishing i had just waited until the 2 post decks made it on ebay now, given I seem to be getting quite the run around with this Maggie lady.

First they were sending a replacement out, then they weren't. Then they needed pictures before they could do anything, which i sent and clearly showed i had got the wrong/cheaper deck. Thought i was good after being told she had already sent out my replacement today while providing a tracking #...just to get an email a few hours latter stating that the Velocity deck was actually out of stock atm and informing me they have to send me out yet another 3 post deck. Ok........LOL

 

[Vapin Dave]

Wow, I paid $50 mine best come with both decks like I ordered. AND a sticker.

 

[cigzag]

I just snagged the last 6ml from a dealer in Kentucky on Ebay. When it gets here I plan on mounting dual twisted 24G Kanthal vertical with a 3mm ID. I may try a dual fused Clapton but the twisted I feel is more suited for this.

 

[Bman123]

Have fun getting a dual fused Clapton coil in there. I barely got a 26g ckre and 32g wrap Clapton in there with 5 wraps on a 3mm bit. It's a friggin squeeze

Sent from my Nexus 6 using Tapatalk

 

[abomaha]

I have the Aromamizer one week ago and I tried deferent builds the best what I found is 26 / 32 Gauge Clapton Kanthal Wire vertical coils.

I have one question, what size of hex screws for aromamizer? I want to order some of them.




Sent from my iPhone using Tapatalk

 

[TheWestPole]

I have the Aromamizer one week ago and I tried deferent builds the best what I found is 26 / 32 Gauge Clapton Kanthal Wire vertical coils.

I have one question, what size of hex screws for aromamizer? I want to order some of them.

What's the inside diameter of the coils?

 

[Zombo]

I don't get why anyone buys this tank directly from China when it's only $5 cheaper than eBay. I had it at my door two days after I ordered it (from AZ to CA), and got the satisfaction of stimulating my own economy.

E-bay was the first place I looked, but they did not have the 3ml version (I didn't know you could buy a conversion top). So I ordered direct from SC and I got it in a week. Someone had said that all orders after Sep 28 would be shipped from NY, I think.

 

[Vapin Dave]

I have no idea where mine is coming from, no tracking # either just "shipped"

 

[Bman123]

I'm interested in getting the 3ml section for it to see how much the flavor is improved over the 6ml since it is shorter in height. I already don't use a drip tip on mine

Sent from my Nexus 6 using Tapatalk

 

[abomaha]

What's the inside diameter of the coils?

It's 2.5 mm


Sent from my iPhone using Tapatalk