Atmistique Atomizers

[Zanza]

Until I got my BilletBox, I didn't used the Diver I had ordered for this purpose... So when Mr Postman bring me finally my BilletBox this morning, I put the Diver inside and thanks it vapes so great

But it also leaks from the bottom of the Diver and I was wondering what is the best trick to prevent this. My cup seems to be tight fitted

 

[Konstantinos]

Try to make your wick a bit longer

 

[Zanza]

Ahem, now it's already cut and tank is half full...

 

[RickCain]

Try to make your wick a bit longer

How long do you suggest? Both of mine leak right out the bottom even with the second piece of NR making the center pin nice and tight.

Also do you want the wick covering the wicking hole as VapeRev is telling me it should but the videos show something different.

Sent from my SGH-M919 using Tapatalk 2

 

[Konstantinos]

Pls check your tank caps if they are tight enough and also make your setup like the pic.
Cut your wicks so when you bent them they come till the start where you screw Divers tube (about 4mm from each side)

 

[Ratman]

Scuba and Diver living happily on the Atomo. Scuba looks great with the HEM Ti custom drip tip! Came in yesterday and was a snap to set up and vaping like a champ!

 

[qorax]

^Looking gr8 Rat√ Especially with the Gold ring over the Scuba... u've nailed the 'matching' to the hilt

 

[Konstantinos]

Frontpage in our fb

 

[qorax]

Frontpage in our fb

Hmm, let mine come in and I'd submit one too for your Fb

 

[SoonerChris]

Was expecting to be vaping with my Diver by today, but alas, USPS Registered Mail sucks. It, with 100ml of GVC, has been in the sort center an hour and a half from my house since the 1st.

Sure hope I get it this week. Reading the awesome stories has got me ready for it.

Soon enough I will have a picture of my Greek connection GP Paps SS, GP SnP, AND DIVER up.

 

[Zanza]

Pls check your tank caps if they are tight enough and also make your setup like the pic.
Cut your wicks so when you bent them they come till the start where you screw Divers tube (about 4mm from each side)

View attachment 248375

Mine is exactly done like this

 

[Konstantinos]

Mine is exactly done like this

Do you also check the rest?

 

[Zanza]

When tank will be empty, I'll check

 

[SoonerChris]

Was expecting to be vaping with my Diver by today, but alas, USPS Registered Mail sucks. It, with 100ml of GVC, has been in the sort center an hour and a half from my house since the 1st.

Sure hope I get it this week. Reading the awesome stories has got me ready for it.

Soon enough I will have a picture of my Greek connection GP Paps SS, GP SnP, AND DIVER up.

And, as expected, received the pink slip of death today....the notice. Guess I'll have to make my way to the post office tomorrow morning and pick up the goods.

 

[tmcase]

When tank will be empty, I'll check

I've found that the Diver works best when the tank is more than 1/2 full. Once it drops below 1/2 I start getting gurgling so I fill up again.

 

[raqball]

And, as expected, received the pink slip of death today....the notice. Guess I'll have to make my way to the post office tomorrow morning and pick up the goods.

At least you know tomorrow you will be a Diver vaping machine!

 

[qorax]

Honey, I'm Home!

Received today; Stock setup 1.7Ω Silica; Half Tank thru; No leaking

 

[Zanza]

I've double checked the Diver when my tank was empty. Apparently no fault at all (I'm using the furnished mounted resistance/cup).

But for me, it seems that the brass rod/center pin is slightly floating in the insulator of the base, so liquid is always leaking from here when the Diver is set vertically.

In the BilletBox, I've left it yesterday night vertically, and this morning, without using it at all, there was a leak of juice in the box...

I'm currently vaping on it at work, and after every toss, i put it horizontally just to verify my theory. And until now, no leaking (or very minimal but nothing compared to yesterday when I've first posted)

 

[Konstantinos]

If u feel the pin is loose just make an angle at the edge of the wire who goes inside the ceramic.
Keep in mind that the ceramic holds the pin not the insulator.

 

[Zanza]

But if there's juice that goes into the ceramic in then passes along the pin and so along the inner of the insulator, no ?

Without puttin the ceramic, the pin is loose in the insulator, that's what I mean