Atmistique Atomizers

[Konstantinos]

Grail for Diver available again. Also available is the bottom part of it for those who already bought Grail 306

http://www.atmistique.gr/en/craven-...page_images.tpl&product_id=525&category_id=75

 

[Konstantinos]

try your build to look like this

 

[SoonerChris]

I honestly don't think it's the wick size..

I have used both a single 3mm silica wick and a double 1.5mm silica wick setup with no issues. My ohms run anywhere from 1.4 to 2.0..

Maybe when you get a chance, can you try and post some better photos.. I can't really see anything in the ones you posted because they are a bit blurry..

Sorry man, I wish I could be more helpful..

I will get some better pics tonight. The iPhone doesn't like doing closeups very well.

When my tank runs low later I will get some closeups of my current build and post them here for you to compare..

I am currently running 2ea 1.5mm silica wicks and it's at about 1.8ohms..

Thanks, I really appreciate all the help.

 

[raqball]

Some Diver love

I will get some better pics tonight. The iPhone doesn't like doing closeups very well.

Thanks, I really appreciate all the help.

No problem man.. I will get my photos up later for you to compare..

 

[raqball]

Here you go..

 

[tmcase]

Grail for Diver available again. Also available is the bottom part of it for those who already bought Grail 306

http://www.atmistique.gr/en/craven-...page_images.tpl&product_id=525&category_id=75

When you say "bottom part" do you mean the base? And if so, will you be selling just the base for the 510 Grail also?

 

[Konstantinos]

We mean the bottom part of the Grail which is an addon for Diver.
Thats why we dont sell Divers base at this time.

 

[nelsonm64]

Some Diver love

No problem man.. I will get my photos up later for you to compare..

may i ask which tank that is?

 

[raqball]

may i ask which tank that is?

It's the Titanide Cartomiser Tank..

Mine is the 20mm x 36mm version and I purchased it to use on a 20mm Titanium 18350 mod that I am waiting on..

Not many options for a 20mm tank and as an added bounus it has titanium end caps..

It's a SWEET tank but it's pretty $$$$$$

Comes standard with a recess for flanged Diver but in the photo above I have a non flanged Diver inside..

 

[SoonerChris]

I think I may have it. It's better, but my battery could be a little low. Last think to check would be the orings on the inside of my SnP. Critique my build.

SMALL EDIT: I have come to the conclusion it's the top/inside orings of my SnP being shredded that letting too much air in thus reducing vapor. Time to put the black one back in.

 

[raqball]

I think I may have it. It's better, but my battery could be a little low. Last think to check would be the orings on the inside of my SnP. Critique my build

That build looks better than mine do..

It looks really good!

Yes check the o-rings on the tank and make sure the wick ends are trimmed down to the correct size.

I'd guess you will be blowing clouds in no time flat!

 

[SoonerChris]

That build looks better than mine do..

It looks really good!

Yes check the o-rings on the tank and make sure the wick ends are trimmed down to the correct size.

I'd guess you will be blowing clouds in no time flat!

Thank you for all the help. Yes, wicks trimmed. Forgot that pic.

Sent from my iPhone

 

[raqball]

Thank you for all the help. Yes, wicks trimmed. Forgot that pic.

Looks like you have it nailed down..

Now there is only one thing left to do...................

Rock it!

 

[nelsonm64]

It's the Titanide Cartomiser Tank..

Mine is the 20mm x 36mm version and I purchased it to use on a 20mm Titanium 18350 mod that I am waiting on..

Not many options for a 20mm tank and as an added bounus it has titanium end caps..

It's a SWEET tank but it's pretty $$$$$$

Comes standard with a recess for flanged Diver but in the photo above I have a non flanged Diver inside..

yeah, that's a nice tank! another tank i'm looking into is the loki tank. anyone in here used one with a diver?

 

[Kataphraktos]

Thank you for all the help. Yes, wicks trimmed. Forgot that pic.

Sent from my iPhone

If you have any issues with the build in this picture, you an try trimming down the wicks a tiny bit more. When I do a standard build like this, I tend to trim them down a bit shorter than what you have here. BUT don't do that UNLESS you have any issues.

I'm vaping out of a Diver in a Scuba tank with this exact setup as I type this, a sample of Diplomat from Captivapes (surprisingly nice juice, actually), which isn't thick like most of my juices, and it is vaping flawlessly, no dry hits, no gurgling, no leaking.

Definitely swap batteries before messing with anything else. When on my mech mods, I cannot tell you how many times sub-par vaping was due to a low battery, as I forgot how long I had it in the mod.

 

[Kataphraktos]

One more idea I saw on a Greek video review of the Diver: the reviewer was having trouble with thick high-VG liquids, getting dry hits when chain vaping. He wrapped a small strip of steel mesh around the top of the ceramic after inserting the ceramic into the Diver base. The mesh therefore wrapped around the wicks, the bottom edge of the mesh strip rests on the top of the Diver base where the threads end, and the top edge of the mesh sits next to the top of the ceramic. For some reason, this helped thick juices wick flawlessly.

Most of my juices are 100% VG, and I have had no such issues with any of my Divers. Just posting this for anyone who may have such an issue.

I don't want to link the review without Konstantinos' permission (FYI the reviewer really liked the Diver).

 

[Konstantinos]

@Kat: anything may help the Divers users is always welcome.
We dont prefer these kind of setup because we believe in diver's simplicity.

 

[Kataphraktos]

@Kat: anything may help the Divers users is always welcome.
We dont prefer these kind of setup because we believe in diver's simplicity.

We bankers like to complicate things. It's how we steal money from everybody.

The video is here.

 

[Thestaar]

Just broke my last ceramic cup, they are really fragile

Tried to build a new coil in the broken cup and it seems to work fine even though the cup is split in half

 

[Konstantinos]

Just be careful because it may gives leakage