Yes they are both 35.5mm long and they can fit in every 35 tank
I'm a big fan of Ekowool and I haven't fully embraced cotton as I always feel like I'm burning it, but I've been inspired by microcoils. I've tried to thread different size Ekowool through a coil wrapped on a drillbit, but it just doesn't work well for me.
Instead, I've been wrapping my Ekowool like normal (doubled over 2mm), except that I wrap the coils so they're touching. Once installed I then dry burn to get the coils hot, stop burning and use a tweezers from different angles to compress the coil into a single macrocoil. I've been using this on my rebuildables with great success. It isn't much different from my regular builds except for how I wrap it and the post-build compressing which doesn't take much time. I don't know if other people are doing this, but it has become my favorite setup.
Not sure why you'd want to do that. The filler material is used to "auto-drip" juice from "top", in a top-feeder setup. In a regular tank the juice will always be there (at the bottom) to moisten the wick.
28awg A-1 Kanthal round wire. Eight wraps gives me 1.4ohms.
Awesome, I just always assumed 28g wouldn't allow the ceramic to sit right.
I'm still using 32awg Nickel for the NR wire

only the shape outside which also gives 0.232ml more liquid in the tank
Scuba burka![]()
Correct me if I'm wrong, but that choke in the middle of the tube ought to increase the concentration of flavor, no?