Bad start.....
Sent from my HTC One_M8 using Tapatalk
Do you have spares?
Atmistique Atomizers
- Thread starter billakosgr
- Start date
- th_trl_thread_readers 0
- Status
Do you have spares?
Yeah from my diver days. What kind of wrap did you do?
Sent from my HTC One_M8 using Tapatalk
Sent from my HTC One_M8 using Tapatalk
I used the stock stuff that came with them. I will re-coil / re-wick in a couple days.
Let me see a pic of that bad boy on the Paps X.
Can't wait to buy one next week.
Sent from my HTC One_M8 using Tapatalk
On an X
Sent from my HTC One_M8 using Tapatalk
Ah man! Looks nice!
Sent from my HTC One_M8 using Tapatalk
First impressions,
(FYI this is just set up using the parts sent to me)
Eviva T/D
Flawless threading.
Nice heft to them, very sturdy, overall feels good.
Ability to change from dripper to tank... Awesome...
SS replacement for ce2 cup... Interesting, I will need to play with them more...
Airflow adjust ability... Great.
Juice flow is great does not need to be modified unless your vaping gravy.
The positive and negative post threading is great, might have opted for Philips head screws over hex head (personal preference).
I would ship them with a larger gauge wire resistance on both setups came out to 2.9 ohms.
I would add a couple o-rings in the bag for the ce2 cups (I like having spares).
I would try to modify the center pin to lock it into a certain height. Adjustability is nice but the threads are so smooth it backs in on itself (victim of you own success).
Eviva drip tips,
Nice as all your drip tips are, I like the laser etched logo.
I like the tall drip tip better due to the larger diameter of the lip piece. The small one just seems too small (but that may just be personal preference).
I would have made the bore diameter larger, for dripping purposes (bore diameter seems smaller than your other tips).
(FYI this is just set up using the parts sent to me)
Eviva T/D
Flawless threading.
Nice heft to them, very sturdy, overall feels good.
Ability to change from dripper to tank... Awesome...
SS replacement for ce2 cup... Interesting, I will need to play with them more...
Airflow adjust ability... Great.
Juice flow is great does not need to be modified unless your vaping gravy.
The positive and negative post threading is great, might have opted for Philips head screws over hex head (personal preference).
I would ship them with a larger gauge wire resistance on both setups came out to 2.9 ohms.
I would add a couple o-rings in the bag for the ce2 cups (I like having spares).
I would try to modify the center pin to lock it into a certain height. Adjustability is nice but the threads are so smooth it backs in on itself (victim of you own success).
Eviva drip tips,
Nice as all your drip tips are, I like the laser etched logo.
I like the tall drip tip better due to the larger diameter of the lip piece. The small one just seems too small (but that may just be personal preference).
I would have made the bore diameter larger, for dripping purposes (bore diameter seems smaller than your other tips).
I'm going to use your format as it is very clean.
Flawless threading. Agreed, quality machining
Nice heft to them, very sturdy, overall feels good. For sure, placed on an X give it perfect balance
Ability to change from dripper to tank... Awesome... YEP
SS replacement for ce2 cup... Interesting, I will need to play with them more... I am ...... that I missed this as I kinda assumed it came with the kit. Just hate having to pay all that shipping for a small part.....
Airflow adjust ability... Great. Works, I will say more below in my summary
Juice flow is great does not need to be modified unless your vaping gravy. First tank and so far it is right on the money
The positive and negative post threading is great, might have opted for Philips head screws over hex head (personal preference). I like the HEX has it is less prone to stripping out.
I would ship them with a larger gauge wire resistance on both setups came out to 2.9 ohms. YES, I broke a CE cup over this
I would add a couple o-rings in the bag for the ce2 cups (I like having spares). YES
I would try to modify the center pin to lock it into a certain height. Adjustability is nice but the threads are so smooth it backs in on itself (victim of you own success). Have not experienced this yet
Eviva drip tips,
Nice as all your drip tips are, I like the laser etched logo. Fits perfect, flows with the atty perfectly
Summary - I am enjoying the first tank and have been chain vaping it for a good 15 minutes with no dry hits. Simple wrap of two pieces of 3mm silica and a 4/5 wrap of 28g (.9 ohms). I look at this as a Diver v2 all grown up to be a stand alone RDA. The result is a solid device that has tons of potential. I think that the air flow control ring needs to be "less tall". My original goal was to use this on my Hana Modz but because the air flow ring over hangs to bottom of the atty (by less than 1mm), I can't tighten it down to the Hana without affecting the air flow settings. Yes it can be tinkered with to work but it would be nice to just screw it down to a mod. Second I would include the replacement piece to the CE cup or at least recommend it when adding it to the cart - us in the USA are not a fortunate to get a decent price on shipping (not a complaint just a suggestion). I ultimately will order one once the clear tanks come out for this RDA.
Pro's:
Quality, quality, quality
Looks classy
Easy to build
Great airflow control (with all three open, direct lung hits are very possible)
Flavor is GREAT - better than a Kayfun IMHO. Sweet notes are crisper. I'm currently using silica and can't wait to give some cotton a try.
Adjustable 510!
Very versatile - tank and dripper
Con's:
I wish it came with the CE cup replacement part. I don't mind paying more
Airflow control ring makes it very difficult to use on a box mod with recessed well (but looks awesome on a Hana)
23mm mod - only for people without a 23mm mod
Up next... try out some micro coils on cotton, attempt a dual coil build with the modified CE cups, show it off!
Great work Atmistique!
Last edited:
I knew I missed something!
Vapes great! Smooth, clean taste. Been vaping like a train, no dry hits.
50:50 juice
Provari running at 5.2v
2.9 ohm stock coil
Just stopping in to say hello. Love the Atmistique gear. I think a Diver v2 will be my next purchase. Really enjoyed my V1. Digging the new Eviva as well.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
K, any idea on when the clear tanks for the EVIVA will be available? I want to place one big order. Also the Gold Enzelis and Gold DTs. I'm still deciding if I want a Gold scuba or just use the Minion.
If someone has a Gold Scuba with a GP Lux that can post a pic that would be helpful. Thanks.
Sent from my HTC One_M8 using Tapatalk
If someone has a Gold Scuba with a GP Lux that can post a pic that would be helpful. Thanks.
Sent from my HTC One_M8 using Tapatalk
I'm going to use your format as it is very clean.
Flawless threading. Agreed, quality machining
Nice heft to them, very sturdy, overall feels good. For sure, placed on an X give it perfect balance
Ability to change from dripper to tank... Awesome... YEP
SS replacement for ce2 cup... Interesting, I will need to play with them more... I am ...... that I missed this as I kinda assumed it came with the kit. Just hate having to pay all that shipping for a small part.....
Airflow adjust ability... Great. Works, I will say more below in my summary
Juice flow is great does not need to be modified unless your vaping gravy. First tank and so far it is right on the money
The positive and negative post threading is great, might have opted for Philips head screws over hex head (personal preference). I like the HEX has it is less prone to stripping out.
I would ship them with a larger gauge wire resistance on both setups came out to 2.9 ohms. YES, I broke a CE cup over this
I would add a couple o-rings in the bag for the ce2 cups (I like having spares). YES
I would try to modify the center pin to lock it into a certain height. Adjustability is nice but the threads are so smooth it backs in on itself (victim of you own success). Have not experienced this yet
Eviva drip tips,
Nice as all your drip tips are, I like the laser etched logo. Fits perfect, flows with the atty perfectly
Summary - I am enjoying the first tank and have been chain vaping it for a good 15 minutes with no dry hits. Simple wrap of two pieces of 3mm silica and a 4/5 wrap of 28g (.9 ohms). I look at this as a Diver v2 all grown up to be a stand alone RDA. The result is a solid device that has tons of potential. I think that the air flow control ring needs to be "less tall". My original goal was to use this on my Hana Modz but because the air flow ring over hangs to bottom of the atty (by less than 1mm), I can't tighten it down to the Hana without affecting the air flow settings. Yes it can be tinkered with to work but it would be nice to just screw it down to a mod. Second I would include the replacement piece to the CE cup or at least recommend it when adding it to the cart - us in the USA are not a fortunate to get a decent price on shipping (not a complaint just a suggestion). I ultimately will order one once the clear tanks come out for this RDA.
Pro's:
Quality, quality, quality
Looks classy
Easy to build
Great airflow control (with all three open, direct lung hits are very possible)
Flavor is GREAT - better than a Kayfun IMHO. Sweet notes are crisper. I'm currently using silica and can't wait to give some cotton a try.
Adjustable 510!
Very versatile - tank and dripper
Con's:
I wish it came with the CE cup replacement part. I don't mind paying more
Airflow control ring makes it very difficult to use on a box mod with recessed well (but looks awesome on a Hana)
23mm mod - only for people without a 23mm mod
Up next... try out some micro coils on cotton, attempt a dual coil build with the modified CE cups, show it off!
Great work Atmistique!
You haven't caught up on the thread, have you? Hit me up via PM if you need cups.
Also: Tell K about the Hana! I'm trying to convince him that box DNA30 mods are the way to go right now.
I'm going to use your format as it is very clean.
Flawless threading. Agreed, quality machining
Nice heft to them, very sturdy, overall feels good. For sure, placed on an X give it perfect balance
Ability to change from dripper to tank... Awesome... YEP
SS replacement for ce2 cup... Interesting, I will need to play with them more... I am ...... that I missed this as I kinda assumed it came with the kit. Just hate having to pay all that shipping for a small part.....
Airflow adjust ability... Great. Works, I will say more below in my summary
Juice flow is great does not need to be modified unless your vaping gravy. First tank and so far it is right on the money
The positive and negative post threading is great, might have opted for Philips head screws over hex head (personal preference). I like the HEX has it is less prone to stripping out.
I would ship them with a larger gauge wire resistance on both setups came out to 2.9 ohms. YES, I broke a CE cup over this
I would add a couple o-rings in the bag for the ce2 cups (I like having spares). YES
I would try to modify the center pin to lock it into a certain height. Adjustability is nice but the threads are so smooth it backs in on itself (victim of you own success). Have not experienced this yet
Eviva drip tips,
Nice as all your drip tips are, I like the laser etched logo. Fits perfect, flows with the atty perfectly
Summary - I am enjoying the first tank and have been chain vaping it for a good 15 minutes with no dry hits. Simple wrap of two pieces of 3mm silica and a 4/5 wrap of 28g (.9 ohms). I look at this as a Diver v2 all grown up to be a stand alone RDA. The result is a solid device that has tons of potential. I think that the air flow control ring needs to be "less tall". My original goal was to use this on my Hana Modz but because the air flow ring over hangs to bottom of the atty (by less than 1mm), I can't tighten it down to the Hana without affecting the air flow settings. Yes it can be tinkered with to work but it would be nice to just screw it down to a mod. Second I would include the replacement piece to the CE cup or at least recommend it when adding it to the cart - us in the USA are not a fortunate to get a decent price on shipping (not a complaint just a suggestion). I ultimately will order one once the clear tanks come out for this RDA.
Pro's:
Quality, quality, quality
Looks classy
Easy to build
Great airflow control (with all three open, direct lung hits are very possible)
Flavor is GREAT - better than a Kayfun IMHO. Sweet notes are crisper. I'm currently using silica and can't wait to give some cotton a try.
Adjustable 510!
Very versatile - tank and dripper
Con's:
I wish it came with the CE cup replacement part. I don't mind paying more
Airflow control ring makes it very difficult to use on a box mod with recessed well (but looks awesome on a Hana)
23mm mod - only for people without a 23mm mod
Up next... try out some micro coils on cotton, attempt a dual coil build with the modified CE cups, show it off!
Great work Atmistique!
I see you point on the screws.
Agreed add the price of the stainless replacement to the cost of the atty.
I need to order a couple things from atmistique, I can add an SS cup to the order.
Heaven
Sent from my HTC One_M8 using Tapatalk
Is that an origen v2?
Yeah I am totally sold on box mods right now... Vaping at 1-1.5 ohms on a regulated device @ 15+ watts creates such a wonderful vape. Building a DNA30 DYI box with bap's design and can't wait.
I have plenty of CE cups ATM but thank you for the offer. I bought 5 with my Diver V2 and only managed to break one
Yes, such a fun device and the flavor is spot on. That is my "I want to sub ohm build and fog up my office" RDA. The Heron is strictly for GVC.
Last edited:
I remember you that we wash all our products in ultrasonic cleaners. Especially the housing we wash it 4 times
You make my day all of you there and want to thank a lot for that.
Because of the day please give me a couple of hours and I will answer to all
Eviva to all
You make my day all of you there and want to thank a lot for that.
Because of the day please give me a couple of hours and I will answer to all
Eviva to all
Last edited:
About the hex head, we will see in the future
Next batch we will send them with 0.20mm wire as you suggest, we already think of it. We prefer the 0.28mm but many people can't use it.
CE 2 orings : note it. Just to mention that ceramic replacement send with orings
Center pin : it is the reason we delay. We start make the Eviva like this. We think that most of the mods have adjustable pole so it's OK but what about provari ??? It has a variable pole from 4.40 to 4.10mm (most of them 4.25) :-(
Eviva drip-tips are the first which give us the surface To put our logo. We still keep use the 4.2 inside diameter in our drip-tips except Eviva because of the Eviva bell hole which is also 3mm.
As we do for all our products we always prefer to give the options instead of bigger prices. So anyone can buy exactly what he wants. That's why we sell the ceramic replacement separately... Also because we are ceramic lovers
Hana/afc: maybe we will make a shorter afc the future we will see, we are in the beginning of this journey. We make now a conical afc from 23mm to 23mm, I think it will helps a lot
Clear tube : in next batch it must be ready.
Allow me to say again :thanks all of you to your comments and most of all to your support
Next batch we will send them with 0.20mm wire as you suggest, we already think of it. We prefer the 0.28mm but many people can't use it.
CE 2 orings : note it. Just to mention that ceramic replacement send with orings
Center pin : it is the reason we delay. We start make the Eviva like this. We think that most of the mods have adjustable pole so it's OK but what about provari ??? It has a variable pole from 4.40 to 4.10mm (most of them 4.25) :-(
Eviva drip-tips are the first which give us the surface To put our logo. We still keep use the 4.2 inside diameter in our drip-tips except Eviva because of the Eviva bell hole which is also 3mm.
As we do for all our products we always prefer to give the options instead of bigger prices. So anyone can buy exactly what he wants. That's why we sell the ceramic replacement separately... Also because we are ceramic lovers
Hana/afc: maybe we will make a shorter afc the future we will see, we are in the beginning of this journey. We make now a conical afc from 23mm to 23mm, I think it will helps a lot
Clear tube : in next batch it must be ready.
Allow me to say again :thanks all of you to your comments and most of all to your support
- Status
Similar threads
- Locked
