With Kayfun Lite you don't need to twist/turn/flip/tinker anything ~ it has a perfectly functioning bottom fill-port. One of the USPs of this atty. And I thought EVIVA had one too (a fill-port), doesn't it?
Atmistique Atomizers
- Thread starter billakosgr
- Start date
- th_trl_thread_readers 0
- Status
With Kayfun Lite you don't need to twist/turn/flip/tinker anything ~ it has a perfectly functioning bottom fill-port. One of the USPs of this atty. And I thought EVIVA had one too (a fill-port), doesn't it?
Nope, just unscrew the top cap and fill. That's why half the juice doesn't end up in my pocket - my personal experience with both KFL and KF 3.1 ES (but I hear the newer editions addressed this).
You can fill your Eviva direct from the top cap without the need of a special equipment like other atomizers.
The procedure you describe takes 10sec and most of all its very easy for everybody
The procedure you describe takes 10sec and most of all its very easy for everybody
Hmm, I'm with KFLs since their launch in early 2013. And the K'fun 3.1ES since same at 2012. None has ever leaked on me! Neither given any trouble whatsoever. Seven purchased, one sold, currently with Six, they are my benchmark attys! One with which I measure all other attys' performances.
I'm deep into SRTAs and thus am watching the EVIVA since its launch as well! Holding back yet due to 23 ~ but might not be able to withstand the attraction for long and fall for it soon
With the clear tank it does look classy as Anne
My KFL+ has the fill port on the bottom, but I don't use it. I just find filling from the top and turning upside down is easier for me. I'm inherently lazy and whatever is faster is what I do, haha.
Edit: I think the leaking issues with Kayfuns were resolved when they added the o-ring to the fill port screw.
Q, if you like Kayfuns, try the Eviva for sure. I think the magic happens with the ceramic cup heating up the vapor and enhancing the flavor, but I'm not a scientist. But I seem to get better flavor from the Eviva with the juice I use. And unlike some other attys - no NR wire, thank heavens!
Edit: I think the leaking issues with Kayfuns were resolved when they added the o-ring to the fill port screw.
Q, if you like Kayfuns, try the Eviva for sure. I think the magic happens with the ceramic cup heating up the vapor and enhancing the flavor, but I'm not a scientist. But I seem to get better flavor from the Eviva with the juice I use. And unlike some other attys - no NR wire, thank heavens!
Last edited:
If someone dont want ceramic cups, there is an option to take the SS cup for the Eviva, I'am I right?
It sure does! I also like the atomizer is installed for some part into the tank, gives it a very properly look with that lower size in height.
Taifun GT does have a XS version tank available, its new, it looks much better now!
"If someone dont want ceramic cups, there is an option to take the SS cup for the Eviva, I'am I right?"
You are right but it cant give the special and delicate flavor that can give the ceramic.
Also keep in mind that we made an amateur measurement and we saw that the ceramic manages to give the same temperature by using almost the half power.
You are right but it cant give the special and delicate flavor that can give the ceramic.
Also keep in mind that we made an amateur measurement and we saw that the ceramic manages to give the same temperature by using almost the half power.
Hmm, I'm with KFLs since their launch in early 2013. And the K'fun 3.1ES since same at 2012. None has ever leaked on me! Neither given any trouble whatsoever. Seven purchased, one sold, currently with Six, they are my benchmark attys! One with which I measure all other attys' performances.
I'm deep into SRTAs and thus am watching the EVIVA since its launch as well! Holding back yet due to 23 ~ but might not be able to withstand the attraction for long and fall for it soon
I don't think the early KFs were leakers so much as sensitive to pressure differentials. I live on the 15th floor. I would build and fill one, and use it for 3-4 days, rewicking and refilling. Worked perfectly. Then, Saturday morning, I would take it with me to brunch, and half way to the restaurant, the juice had flooded into my pocket and down my pants. The only thing I changed is that I left the house - and descended about 200 feet.
Everyone I know who has KFs has multiples, and does not have this issue - but they all live in the suburbs, so if my suspicion is correct, would not ever experience this in their daily routine.
Ok, I didn't knew that!
Now thats interesting for chain vapers
I'am not a chain vaper, but It does make sense this has a beneficial effect on the flavors when temperatures goes up some.
LOL
I know, even my ears doing the same like into an airplane if standing into such elevator of those skyscrapers in NY!
Eviva-T available again from our site
http://www.atmistique.gr/en/new-pro...page_images.tpl&product_id=675&category_id=97
http://www.atmistique.gr/en/new-pro...page_images.tpl&product_id=675&category_id=97
Pretty!
I would like to ask about the Eviva clear tank tube, what the maximum temperature is allowed for it?
I would like to ask about the Eviva clear tank tube, what the maximum temperature is allowed for it?
It is made from food grade acrylic plastic (like the Scuba tank) and it has Decomposition Temperature (Deg C°): > 350
Oh Wow!
That for sure will hold a big eviva
Thx for information, Konstantinos!
That for sure will hold a big eviva
Thx for information, Konstantinos!
Hi K, is it possible to purchase the EVIVA just with the clear tube (without the metal tank)?
Whoa! That's what I call a looker
Whoa! That's what I call a looker
Last edited:
Hi K, is it possible to purchase the EVIVA just with the clear tube (without the metal tank)?
Whoa! That's what I call a looker
I'm not generally a fan of clear tubes, but that thing is pretty awesome.
K, is the 'Eviva' logo engraving on the clear tank something new? Mine didn't come with a logo - which I prefer - but just curious.
- Status
Similar threads
- Locked
