Atmistique Atomizers
- Thread starter billakosgr
- Start date
- th_trl_thread_readers 0
- Status
+1 this thing just keeps amazing me and it is all I use now I could not be more happy
I have to agree, this thing is amazing. I decided to try something that made it a little less simple, but even more amazing. I wrapped a micro-coil with 8 wraps of 30g on 2mmx1 silica (all wraps looked to be touching) Came in at 1.3ohms and out performs my 1ohm builds...seems to heat quicker, it's Just as warm, but more vapor and favor...dang hope I can repeat this one.
Last edited:
Thanks Konstantinos!! the leaking was an issue last night, but I brought it with me to work today with very minimal leaking, just a drop over the past 8hrs..I am using the stock resistance that it came with and it is reading 1.7ohms.. now i could have trimmed the silica a little bit but I think it is leaking because I shoved the whole silica in the DRIVER and that may be the issue(not sure though) when i get some new silica wire I will set up the tank again and check everything out...
by the way the device is outstanding.... MY cinnabun ejuice never tasted this good...
thanks again!!!
by the way the device is outstanding.... MY cinnabun ejuice never tasted this good...
thanks again!!!
Simply a very quick thought on my part . . . Too much wicking material other than having trimmed it short of the base's threads may lead to flooding/leaking.
In addition, if the extra silica is trapped in front of the juice flow hole, that in itself will promote flooding and a potential for leaking, as well.
- Andy
I can't wait... mine is still making it's way home to me. lol
I have a billet box on the way and that was the reason why i picked this up, I wish I got the DIVER earlier! this atty is great! I forgot how well silica tastes... I have been using my DID/AC9 and boge cartos for the past 6 months without touching silica at all.. man have I been missing out... i still feel that wrapping a silica wic is more difficult than wrapping a SS mesh wick 
I have a billet box on the way and that was the reason why i picked this up, I wish I got the DIVER earlier! this atty is great! I forgot how well silica tastes... I have been using my DID/AC9 and boge cartos for the past 6 months without touching silica at all.. man have I been missing out... i still feel that wrapping a silica wic is more difficult than wrapping a SS mesh wick
Yes, I agree, Smokfreedoc. Wrapping a SS wick is done without a thought.
As with all of my silica wicked devices, I line up a thin straightened paper clip with my silica assembly prior to wrapping the coil. this makes wrapping the coil very simple. This method yields uniform and evenly spaced coils.
- Andy
I'm trying to by a Diver on the Atmistique site and it keeps telling me that my browser is blocking cookies so I can't put anything into my cart. I've tried both Firefox and IE with cookies being allowed and it still gives me that warning. Very frustrating trying to give someone money and not being able to! I'm about ready to give up. Anyone else have this issue?
Never mind I fixed it. Still get the message but at least I see my cart now!
Never mind I fixed it. Still get the message but at least I see my cart now!
Last edited:
Weird...no message on my end in Firefox or Chrome. At least you still get to order.
threw in my flangeless diver with a mini tank on my Zen carto tank hybrid...and it is kind of working...definitely have some kinks to work out ...floods fast...when filling and i cant seem to get the air bubble trick (flip upside down thing) working to really get it not to flood...but im gonna try it more hopefully
tips?
tips?
not sure on that tank, but if it's an open top to fill, you'll want to pull the diver down to where the feed hole is below the bottom oring while filling. if you can get the top back on prior to pushing the diver back up into the tank, it will help. Thats the only way i can fill a fluid flask with diver.
any pics if the tank ti give a better idea if how it is designed?
Pete54: i see that u put your order. Did u find why u have this problem?
thejager: as narcolepticltd wrote a pic will be very helpful. Pls help me understand better your problem
thejager: as narcolepticltd wrote a pic will be very helpful. Pls help me understand better your problem
Here is a screen shot showing the warning. I did manage to get one ordered though.
ill try to get a pic later... but it is built in a way that doesnt allow for the feed hole to be installed below the bottom oring when filling...any other suggestions?
- Status
Similar threads
- Locked
