Atmistique Atomizers

[MechaHerc]

Good illustration - it matches the guidance given on the Diver product page on Atmistique's website:

Some useful advice on its use:

Screw the tube tightly (a touch of liquid on the o-ring will help) on the base of the atomizer and make a small mark near the side hole of the tube so that it can be easily distinguishable.

Remove the tube and mount the ceramic in the atomizer base so that the edges of the two slits of the ceramic form an equilateral triangle with the small mark you made on the atomizer base.

yes, thats what i do..

I already keep them.
Nice work MechaHerc, thanks a lot for that

Just an update.. after refilling the tank until full.. still getting the dry hit.. seems the juice not suck into the diver.. by the why i'm using Global tank Provari..

Tank Global Provari - eSmoker-inc / Crystal France

same like Kir Fanis Prive Tank but can use pyrex glass..

hmm.. i dont know why this happen..

 

[eratikmind]

Since my first Diver, I have observed that it feeds better if there is an even air gap left at the top of the tank when filling.

I only fill my tanks up to about some 80% when using the Diver. As such, I have not had any feeding issues.




- Andy . . . Don't let the Ciggieman getcha . . . Vape'em.

 

[MechaHerc]

Since my first Diver, I have observed that it feeds better if there is an even air gap left at the top of the tank when filling.

I only fill my tanks up to about some 80% when using the Diver. As such, I have not had any feeding issues.




- Andy . . . Don't let the Ciggieman getcha . . . Vape'em.

Yes!! You right.. Its feeding better now.. thanks brother.. Im really happy now lol.. Whats the logical reason about this problem? not enought pressure to help the juice?

 

[eratikmind]

Perhaps too much pressure. Thus, not affording the juice/bubble exchange to work properly. I experienced the same, as you, and that was my fix.

Very pleased that it worked for you. The Diver experience should not be missed over a small issue.


- Andy . . . Don't let the Ciggieman getcha . . . Vape'em.

 

[GB023]

Since my first Diver, I have observed that it feeds better if there is an even air gap left at the top of the tank when filling.

I only fill my tanks up to about some 80% when using the Diver. As such, I have not had any feeding issues.






- Andy . . . Don't let the Ciggieman getcha . . . Vape'em.

In my month with the Diver, I have found if I am getting dry hits, or maybe I feel it's running a little lean, it is because the ceramic is not set properly. I take it apart, put the base in an old mod to hold the post in place and press hard to make sure the ceramic is in place and that cures the feeding problem. This has worked great for me...just something else you can try...

 

[thejager]

so the grail is just a different adapter for the normal diver base?

i thought it would be 306 sized...

 

[Konstantinos]

The Grails upper cap is the same for the 2 versions.
Each version will have different base. One of them is for 306 atomizers

Στάλθηκε από το GT-N8000 μου χρησιμοποιώντας Tapatalk 2

 

[thejager]

ahhh... so there is a 306 base version? and the current Diver would be a 510 base version?

i really want this to be perfect for me no pressure


also...anyone have any experience with putting a SS Mesh wick in the Diver? I have an issue with silica

 

[Firestorm]

I have an issue with silica

Do you have an issue with Ekowool? I had bought 2 meters of 2mm cord and I've just gone through half of it. I just ordered 5 meters of 1.5mm cord - I think it will be easier to work with and may perform better.

I spent some time today sanding my extra ceramics (I have 14 in total). I made sure the sides of the slots are uniform and smooth and I even sanded the edges to try prevent cutting into the wick.

 

[Konstantinos]

ahhh... so there is a 306 base version? and the current Diver would be a 510 base version?

The current Divers base screw to the bottom part of Grail (Diver version)

 

[narcolepticltd]

konstantinos, is the acrylic tube on the scuba tank PETG? just curious if it will be safe with all juices and not crack.

also, how many weeks till the diver grail is available... looking to order the tank when that arrives, as well as some replacement brass posts (one of mine has never seated properly and always falls out, 32g nr wire).

 

[Konstantinos]

The material is acrylic food grade not polycarbonate. Thats why i dont think that u have this kind of problems u mentioned.
The plans are to start the Grail in the end of this week, so in the beginning of next week we will have the first pieces.
Divers pin will be available also in about 2 days.

 

[Pete54]

Is the Diver available through a distributor here in the U.S.A? Seems to take quite a while for orders to get here. Ordered on June 14th and still not here. Not complaining, just trying to plan ahead as, if it works as well as others have said, I plan on ordering a few more.

 

[Konstantinos]

Something must going wrong with your order Pete. Let me check it tomorrow and tell u.

 

[Larzis]

Quick question, what time do items (such as Diver) typically go on sale? Need to know if I will have to stay up late or set alarm clock this week

Thanks!

 

[Konstantinos]

I think that u must set the alarm this week.
Most of this production batch is for wholesale, few of them u will find in our shop about Wednesday 15.00GMT.
I will keep inform this thread as always.

 

[Larzis]

I think that u must set the alarm this week.
Most of this production batch is for wholesale, few of them u will find in our shop about Wednesday 15.00GMT.
I will keep inform this thread as always.

O not bad at all, think that is around 10AM my time. Will keep an eye on this thread, and is there a list of your resellers anywhere? Thanks!

 

[Technonut]

I think that u must set the alarm this week.
Most of this production batch is for wholesale, few of them u will find in our shop about Wednesday 15.00GMT.
I will keep inform this thread as always.

Who are the distributors in the US expecting shipment?

 

[Konstantinos]

Most of them are from Europe.
We try to make an official list of our resellers, soon it will be available

 

[Greatov]

Hey guys quick question, I just got my diver (which I am very excited about) and I have a trap tank so I can't get it to mount perfectly flush on my 22mm mod because of the flange. Can anyone recommend a tank that is 22mm that will allow for a flush mount or is there any other fix?