Atomizer Adaptors?

[youngunner]

Hi Guys,

I'm sorry for my ignorance- but if someone wouldn't mind helping a noob modder out or at least pointing me in the right direction. Is there a way that I could build my own atomizer adaptor- or someone that sells them pre-made? I have 510 attys and 801s- Can anyone point me in the right direction?

Are adaptors only for specific models- or are they universal for the most part?

Thanks for your help!

 

[Kewtsquirrel]

Hi Guys,

I'm sorry for my ignorance- but if someone wouldn't mind helping a noob modder out or at least pointing me in the right direction. Is there a way that I could build my own atomizer adaptor- or someone that sells them pre-made? I have 510 attys and 801s- Can anyone point me in the right direction?

Are adaptors only for specific models- or are they universal for the most part?

Thanks for your help!

Young, no one makes those adapters commercially right now, but you can get the connectors and make them yourself or have people on the forum make them for you. Drop me a PM if you need the connectors, I've got ya covered

 

[crashtestjeep]

Cisco will make you an adapter if you send him the dead parts. Im waiting on a batt to die now so I can get him to make me one. Send him a PM and if he's willing to do it, hell just ask for the parts and some cash to compensate the efforts. I hear he does nice work if ur not into diy modding. just an idea if u didnt want to try it out urself. i tried but had the parts backwards so now waiting on another one to die and just send off, lol. im sure his will be prettier than mine lol....

 

[DaMulta]

Young, no one makes those adapters commercially right now, but you can get the connectors and make them yourself or have people on the forum make them for you. Drop me a PM if you need the connectors, I've got ya covered

hehe

AltSmoke | Personal Vaporizer 510/Yeti/SilverBullet Adapter - Accessories

510 to 801 or 901

They are in the mist of making the ones for 901 to 801/510 also

 

[boxhead]

Garry Dibley is doing them in england, and there hand made, and other stuff too, but i got nerf`s battery bits and made my own 901 to 801 with a led for use on a SD / shhhh, dont tell trog \
E-Cig Multi Adaptors -

 

[Kewtsquirrel]

Ooooo you put an LED on your adapter boxhead? pics!

 

[JrdUK]

I also got one from gary, 901-510 works fine

 

[boxhead]

soon!
it`s just a bad hole in a dead atty tube, the tube is hard, and i used a dremel tool grinder wheel, looks like #$^, kina says i could go with a smaller resistor and i have 1 thats ONE day off to get to a place with a sharp drill, and use one more set of your conecters, so instead of fighting the wiring, a small r would make the shrink tubing + wire easer to fit. mostly i`s afraid trog will come and get both of my SD`s for my trouble

and i have never looked at any pic`s posted here that, well none that i have seen, looked as bad as the kludged thing i hack up. eveyone here has mech. and eng. dregrees, machine shops, and SKILLS.

 

[halopunker]

hehe

AltSmoke | Personal Vaporizer 510/Yeti/SilverBullet Adapter - Accessories

510 to 801 or 901

They are in the mist of making the ones for 901 to 801/510 also

In the process of making:

901 Battery to 510 Atomizer
801 Battery to 510 Atomizer

Skipping the 901 --> 801, and 801 --> 901 for the moment. I have to get a crap ton made for each adapter, and don't want to be able to go swimming in them

 

[ApOsTle51]

boxhead , just use the LED and board from an old ecig battery , has the resistor on the boardyou can always glue the LED in place in the adaptor.
I done that with the laser mods , works a treat.

Just a thought

ApO.

 

[warp1900]

soon!
it`s just a bad hole in a dead atty tube, the tube is hard, and i used a dremel tool grinder wheel, looks like #$^, kina says i could go with a smaller resistor and i have 1 thats ONE day off to get to a place with a sharp drill, and use one more set of your conecters, so instead of fighting the wiring, a small r would make the shrink tubing + wire easer to fit. mostly i`s afraid trog will come and get both of my SD`s for my trouble

and i have never looked at any pic`s posted here that, well none that i have seen, looked as bad as the kludged thing i hack up. eveyone here has mech. and eng. dregrees, machine shops, and SKILLS.

I have none of those degrees, and no machining skills or tools, all you need is a dremel, pipe cutter and time.


Click on my signature link so you see how to make adapters the easiest way I could come up with.

---

 

[youngunner]

Thanks for the Replys! I have no electronic skills, but I want to learn. thanks for everyones help!

Nerf- Im going to send you a PM right now!

 

[boxhead]

i know,i know. i was/am still tired and feeling sorry for myself,
everyone comes up with such cool stuff, and i have a no time to really make cool stuff too.

I posted a pic of it in this forum, but i goofed the heading.

 

[warp1900]

i know,i know. i was/am still tired and feeling sorry for myself,
everyone comes up with such cool stuff, and i have a no time to really make cool stuff too.

I posted a pic of it in this forum, but i goofed the heading.

You mean this really cool adapter with an integrated led in it?










-