Attack of the clones (Rose V3)

[Cumulo Vapus]

Ok cool...i ruled out the sxk clone due to the 510 pin so looks like i might go for the no name clone.

Ive heard it could be made by shenray....is that company any good?

 

[rifky]

My suggest, take SMJY from 3FVape. From my Experience my PICO, kayfun 5, Split Atty are better from SXK

 

[nelsonm64]

it looks like the SJMY has the same long 510 like the SXK. atleast from the pics it does...

 

[nelsonm64]

Ok cool...i ruled out the sxk clone due to the 510 pin so looks like i might go for the no name clone.

Ive heard it could be made by shenray....is that company any good?

you won't be disappointed. mine is perfect, not one issue

 

[Cumulo Vapus]

you won't be disappointed. mine is perfect, not one issue

yes its in the cart waiting to go….can you confirm it comes with 2 drip tips…the black and white?

Also, no spare parts yet.

 

[nelsonm64]

yes, it comes with both.

 

[DP2Raja]

I have the SXK version and it's perfect. Beautiful.

 

[nelsonm64]

I have the SXK version and it's perfect. Beautiful.

what about the 510 pin? does it stick out a lot? seems some do and some don't...

 

[stvn77]

what about the 510 pin? does it stick out a lot? seems some do and some don't...

+1

 

[Nailz]

Got my SXK from fasttech today, it is the long 510 version

But it does sit flush on my therion though, but would put me off getting another SXK version though

Put a 1.5 ohm clapton coil in and wicked up

vaping really well, flavor is very good, and not had any leaking yet. Opened juice control about 2 turns, and even though not seen any bubbles, wicking well, been chain vaping and no dry hits

My only picks on the v3 would be, be nice if they had something where you can actually see how much you have turned the juice control, like kayfuns v3/v5 have a logo on the chimney. Holes in the top fill are a bit small, can fill with a dropped bottle, but can get a bit messy though.

But overall I am really liking the vape it is giving

 

[Cumulo Vapus]

^^ Looks beautifully machined….the protruding 510 pin worried me as I need an atty to function on all my mods….went for the no name one on 3F instead.

The SJMY one comes with a translucent bell cap where you might be able to see how much you've turned the juice flow open. For other versions, I guess you have to do a couple of dry runs without the tank covering to figure out how much you need to turn it.

 

[rifky]

Anybody here have a smjy clone and kindly post a pic? Especially 510 pin

 

[pappasmurfsharem]

SXK came today.

With the bottom ring on it wouldn't make contact with my positive pin.

Did a few slight turns of the positive pin and it seems to work now, not sure if it's supposed to be adjustable or not but it appears to be working.

But the flavor..... It's ridiculous. To much in fact.

2 Turns of the juice flow seems to be good enough with 70VG 30PG juice.

Out of all the tanks and RDA's i've used this is with a doubt the most intense flavor i've had and this is just with a standard 24AWG NiChrome80 round wire build, the flavor is better than any of my dual fused clapton builds on my RDAs.

 

[Chodi]

I don't see it mentioned here so I thought I would just say I have the version from Coppervape and it is perfect. The 510 does not protrude. It appears to be a 1:1 and performs as it should with no problems.

 

[Steamer861]

I have Copper Vapes & SJMY clones, A lot of people are turned off by the plastic Tanks.
Their missing out! these Rose V3's have flavour for days, The JFC works good, capacity could be a little more, but the nice small look is good to. The Rose V3 is in my top 3 single coil tanks!
Only little down fall I find & it's with both versions I have, is a bit of leaking thru the 510
It's not that bad but I find I have to remove them & wipe the bottom & the 510 connector on the mod occasionally. I guess it's the SMY version with the 510 pin protrude issue? cause both of mine are good

 

[Chodi]

I have Copper Vapes & SJMY clones, A lot of people are turned off by the plastic Tanks.
Their missing out! these Rose V3's have flavour for days, The JFC works good, capacity could be a little more, but the nice small look is good to. The Rose V3 is in my top 3 single coil tanks!
Only little down fall I find & it's with both versions I have, is a bit of leaking thru the 510
It's not that bad but I find I have to remove them & wipe the bottom & the 510 connector on the mod occasionally. I guess it's the SMY version with the 510 pin protrude issue? cause both of mine are good

Just for the record I have had no leaking through the 510 or anywhere else. I have been through several builds and many refills. As with any tank if you overfill it the juice has to go somewhere. I have had the smallest seepage through the airflow when I have been too aggressive in filling only. I tend to use thicker (70/30) juice so that may be why I have not had problems.

 

[Nailz]

Only had a little seepage from rose v3 clone I have, can't remember which one it is, but the 510 does stick out a but though, but works fine.

Love the flavor from this atty, my only real complaint is the fill holes, so small it can be a PITA to fill, did think about drilling one of them bigger, but might not get a good seal then and cause leaking.

 

[Steamer861]

Only had a little seepage from rose v3 clone

Can I ask were from? I get a tinny drop out the 510, no leaking at all any were else.

 

[Nailz]

Can I ask were from? I get a tinny drop out the 510, no leaking at all any were else.

Out of the 510 too

 

[pappasmurfsharem]

Does anyone have the SXK version and have an issue with it seeping/weeping/leaking?

It's not flooding because there is no gurgle, just juice starts to pool around the 510 and I really don't want to give up on this one because the flavor is the best I've ever had in any device.

Quick question on the drip tips that come with the clone….I believe it has teeth on either side to grip and turn the JFC….does this mean that you can't use any other drip tip with this tank?

Or can you use the ones it came with just to turn the jfc ...and then swap for any other drip tip you want?

You can use any standard 510 Driptip, but the adjustment needs to be done with the included