Attack of the Hana Modz Clone. Let's wait together!
- Thread starter Fathomrock
- Start date
- th_trl_thread_readers 0
- Status
mine has an impression around the 510, but it might be from my nautiluses.
other than that, not a mark on it. it's blue, and it's beautiful!
Screw that noise, they can send you a return label .... dicks ...
I bought one from them it had minor machine marks around the 501 connector, the one I got from wet Vapes was a little more
Pronounced.
I messed up earlier and said that the elev8 Black had no LED. I used it for a while and just now plugged in the charge cord and I can see a Real Bright red LED. I can't believe it.
Earlier when I got it in the mail I took the Sony vtc4 straight off the charger. Then installed it and plugged into USB. No led.
Sent from my iPhone using Tapatalk
Earlier when I got it in the mail I took the Sony vtc4 straight off the charger. Then installed it and plugged into USB. No led.
Sent from my iPhone using Tapatalk
once i connect it show a red light but nvr try USB charging as I prefer to use the standard battery charger
Sent from Gotham City using Tapatalk
What I meant by USB is I use a USB wall wart and the cord that comes with it. I never plug into computer or laptop.
Sent from my iPhone using Tapatalk
Yes, I did the similar test as you using the cord that comes along with the unit.
And plug into my iPhone socket directly to the wall power . It show red light from the USB
Since I tested it is working I removed and continue using my standard charger for changing the the battery
One thing to take note, my other clone make due to usage too hot and the hot glue fall off and this the screen drop from it's position
So I always charge the battery from a standard battery charger
Sent from Gotham City using Tapatalk
Didn't get too carried away tidying it up but its alot better than a crap load of hot glue. I left the bottom portion with the up/down buttons and usb in because they are encapsulated in hot glue and in all honesty I have no real complaints with any of those components. I did the fire button because it gets alot more repetitive use than the power up/down buttons because I mostly hold them down to make wattage adjustments. Not too difficult to mod at all, took a couple hours in total, that plastic plate makes life easy for alignment but will only come out if the 510 and fire button are out. On a side note, the stock 510 connector surprisingly has a delrin insulator, can post a pick if required.
so after coming down from the 4 day high of having a box mod finally, ive read around on reddit and found out i dont seem to be the only one who has gotten a DUD. it seems to be the screen shuts down... still able to fire, then the whole thing shuts down... all this within the first week some way less. sooooooooooooooooo whats the deal? anybody find anything out yet or is it just like russian roulette with cana modz. are cloupor and the vendors doing anything about this? because i dont see the point in spending the time and money to send mine back in for a replacement if i can only enjoy it for a couple days before it craps on me like this one did.
The group buy went down, I'll see if I can contact him and get some information...
What kind of builds are you guys using on this? I'm using a fogger v4 on my mech, 0.6ohm, put it in this clone and it needs to be vaped at 30w to be "similar" to the mech. Obviously I don't want to vape at 30w all the time. Are you guys using 1.5ohm and up?
I am mostly on .7 to .9 range on my Kayfun, Taifun and Aqua with 30 and 28 gauge kanthal twisted together.
Ok. One thing has confused me forever and maybe you guys can explain. Why does this chart show for 4v and above you need a 1.8 ohm build or higher? What enables us to us the low ohms at 4v and higher on the clone? I have a .9 and 1.1 ohm build-28 g, that do seem a little hot sometimes at 4v. Please help!
This from the Cloupor website.
Common Problems and Solutions for Cloupor DNA30 Modz
2014-06-16 11:07:40
Posted in Latest News By cloupor
“Check Atomizer”
Cause 1) : the negative pole was loose.
Solution: try to screw tightly and see whether it can work or not.
Cause 2) : the positive pole is too low, the atomizer is too deep, so it had been damaged; Solution: about the procedure, we had checked many times, it had no problems.
Cause 3) : Program Bugs
Solution: Please contact the vendors from which you bought or our company, and offer us the video that reproduced the scene so that we can quickly notice this problem and offer you solution in time.
“Too Hot”
1) It is because our chip works all the time, no rest, the following image is our cloupor dna30 modz chip’s Oscilloscope test images.
Solution: Later we will add a special function of self-protection, it will messure temperature in our following production.
“Shinning Screen”
Cause: This is our company’s responsibility, Maybe Screen’s cable does not weld well.
Solution: Within the warranty time, you can contact the vendors from which you bought and our company to ask a replacement.
“Shorter”
Cause: The atomizer’s resistance value is too small.
Solution: Try another atomizer to check whether the mod can work well or not.
“Fire ongoing”
Cause: We checked and excluded all the programs, the cause we can consider is that the products on the shipping road, which lead to on and off key, input and output key is too close
Solution: Check the dna30 chip’s on and off key, input and output key, and our company will increase glue capacity to fixed them.
All our cloupor products are 100% passed strictly quality control, and we will also do sampling inspection to completely promise our products quality before sending them to the distributors from different countries. But the shipping problem is the only one thing that is not under our control, and you also know that every small collision will effect the chip cpu’s function. Our company is trying our best to offer the best products and after sales support for every user, so we hope users can also be confident and trust us. Thanks.
Common Problems and Solutions for Cloupor DNA30 Modz
2014-06-16 11:07:40
Posted in Latest News By cloupor
“Check Atomizer”
Cause 1) : the negative pole was loose.
Solution: try to screw tightly and see whether it can work or not.
Cause 2) : the positive pole is too low, the atomizer is too deep, so it had been damaged; Solution: about the procedure, we had checked many times, it had no problems.
Cause 3) : Program Bugs
Solution: Please contact the vendors from which you bought or our company, and offer us the video that reproduced the scene so that we can quickly notice this problem and offer you solution in time.
“Too Hot”
1) It is because our chip works all the time, no rest, the following image is our cloupor dna30 modz chip’s Oscilloscope test images.
Solution: Later we will add a special function of self-protection, it will messure temperature in our following production.
“Shinning Screen”
Cause: This is our company’s responsibility, Maybe Screen’s cable does not weld well.
Solution: Within the warranty time, you can contact the vendors from which you bought and our company to ask a replacement.
“Shorter”
Cause: The atomizer’s resistance value is too small.
Solution: Try another atomizer to check whether the mod can work well or not.
“Fire ongoing”
Cause: We checked and excluded all the programs, the cause we can consider is that the products on the shipping road, which lead to on and off key, input and output key is too close
Solution: Check the dna30 chip’s on and off key, input and output key, and our company will increase glue capacity to fixed them.
All our cloupor products are 100% passed strictly quality control, and we will also do sampling inspection to completely promise our products quality before sending them to the distributors from different countries. But the shipping problem is the only one thing that is not under our control, and you also know that every small collision will effect the chip cpu’s function. Our company is trying our best to offer the best products and after sales support for every user, so we hope users can also be confident and trust us. Thanks.
Ok. One thing has confused me forever and maybe you guys can explain. Why does this chart show for 4v and above you need a 1.8 ohm build or higher? What enables us to us the low ohms at 4v and higher on the clone? I have a .9 and 1.1 ohm build-28 g, that do seem a little hot sometimes at 4v. Please help!
1.1 ohms at 4 volts = 14.5 watts
The chart has been around for years and is a quick method to see the range of comparing voltage and ohms to arrive at wattage.
The chart is color coded and for most vapers the green area is where you will get the best vapor to flavor ratio. Below the green you have reduced vapor and flavor. Above the green you will have more vapor and hotter, less desirable flavor and a burnt taste.
The chart needs to be updated to include sub ohm readings but you can see from the chart that the green range shows a variance from 7.5 to 8.45 watts on the high side to 4.0 to 4.41 watts on the low side depending on ohms reading. Then you can see the voltage at any given point. Thus staying between these ranges may give you the best vape. Sub-ohmers tell me the chart doesnt apply to sub-ohm . The chart just shows ohms law in an easy read.
The variable power regulator (variable wattage) technology was designed to regulate the voltage depending on the ohms reading and wattage setting and automatically adjust the voltage. So, as an example you have a 3.0 ohm coil set at 8.4 watts and it gives you that perfect vape . You can remove the 3.0 ohm coil and screw on a 2.5 ohm coil and leave the watt setting at 8.4 watts and the voltage will automatically change to give you the 8.4 watts you desire. Thus the vape quality remains the same.
Since the clone dna is not designed to regulate below 4 volts the perfect vape as shown in the green area of the chart cant be achieved. Thus the 14.5 watts with a 1.1 coil at 4 volts is above the green range of the chart thus hotter and can have a burnt taste
I know this is kinda technical but hope this helps ..
Gee, add more glue.
Just how hot does the chip get while melting all that glue in there, a lower temp alloy is used nowadays instead 60/40 solder.
Just thinking out loud here.
Just how hot does the chip get while melting all that glue in there, a lower temp alloy is used nowadays instead 60/40 solder.
Just thinking out loud here.
- Status
