Thank you , but that is not tolerated in this thread , either you buy sight unseen or get out lol.
Attack of the Hana Modz Clone. Let's wait together!
- Thread starter Fathomrock
- Start date
- th_trl_thread_readers 0
- Status
Thank you , but that is not tolerated in this thread , either you buy sight unseen or get out lol.
I am leaning in that direction , (i'll send my address asap ) appreciate it Steve , always had a good feeling about you lol. In all seriousness i think they are probably fine , i am a procrastinator (in case anyone hasn't noticed and decision making is a ..... for me) .
To all that despise my presence on this thread , deal with it , i'm staying, think i'll just observe from the background but i'm still here.
Last edited:
herb....just saying.... take all the time you need to make your decision....what you want or need is what matters and you need to be comfortable in your decision....you are taking a systematic approach in evaluating the comments made in this thread.... good luck... no need to be in the background either...
I love dripping, I hate juice splattering everywhere. Thats tough to balance out. Cats RDA looks good for that, but I dont like the brass shell.Yep.... many factors to a great vape..... and what "floats my boat may not float yours and visa-versa" I like my vaping simple and as "fiddle free" as possible... here is mine:
All devices are DNA variable wattage using 1200 mah (20 C rated) rechargable batteries and all set to the same wattage setting.
All cartomizer tanks have 3.0 ohm pre-drilled cartomizers installed.
My juice selection is limited to the same 3 or 4 that I use.
Each device gives me 8 to 10 hours of vaping and never reaches cut-off before I recharge.
Tanks never leak and never any burnt taste. Gives me the desired vapor and flavor.
Cartomizers changed out when flavor begins to drop off, usually around 4 to 5 days if used continually.
I buy the cartomizers in bulk "usually 100 at a time" at a very good price. About a years supply.
I buy my e-liquid in quantities of 100 ml. bottles or larger.
Typical day:
Grab fully charged device.
Fill the 4 ml. tank with e-liquid (through a fill hole). Total e-liquid in tank/cartomizer is 5 ml.
Vape 8 to 10 hours. If out-and-about I take a second identical setup as a spare just in case of a failure (haven't had one yet).
Fiddle free.....satisfies my needs and desires....and that's all that matters to me....
Everybody eventually finds "what floats their boat" and that is what matters....
Hang in there herb, hopefully things will get better for you. I know it's tough to pull the trigger at times, I think we've all been there.
Nuh uh. If you're stayin', I'm stayin'!
I do agree with retird, herb. It's your decision making process and your business and your future device... so take all the time you need.
I've got both the Okr-6(35w) and the Okr-10(50w),both use duel 18650's.I've owned the ok-6 for about 4 years and have had to replace the connector only once.I've had the ok-10 for about 6 months and so far no problems.For about $60 it's hard to imagine anything working better than these plus I don't have to bother with annoying menus like I do on my Nivel box.
I ordered a clone last week to toss in my glove box for emergencies.I'll report back in a few months.
P.S. The Okr chips are available for about $8-10. for those interested.
Thank you for your comments LLaV , very helpful , although your second paragraph threw me for a loop after reading your first . Please keep us informed .
Thank you very much retird , i do appreciate it.
Nuh uh. If you're stayin', I'm stayin'!
I do agree with retird, herb. It's your decision making process and your business and your future device... so take all the time you need.
Thank you very much Katdarling , appreciate the support but these guys don't intimidate me , i have been through and survived life's most difficult and trying periods so this is nothing by comparison.
I can see how my back and forth can irritate people , i mean no harm or disrespect though , just my individual quirks lol.
Me too. Have also beem thinking about a genisis style. Struggling to find perfection in am evolving world
I'm still waiting for delivery (posted earlier in this thread that it shipped). While I'm waiting, I picked up a Tobe Atty clone copper, 2 VTC5 batteries & and ohm reader. I've been using my eVIC to check resistance, I figured I would just get a reader since I was in the store.
I just built a dual coil .9 ohm setup in the Tobe and I'm just vaping while I wait for the tracker to update. USPS is so damn slow at times.
The Tobe looks very nice on my copper Nemesis clone. I can't wait to pull one coil and throw that bad boy on the Cana. I think the orange and copper will look very nice.
I even ordered 150 ml of juice from Heather's Heavenly Vapes to arrive on Monday. My wife said quote "It feels like your getting ready for your baby to be born".
Here's 2 pics of the Tobe and the ohm reader while we all wait:
View attachment 351043
View attachment 351044
I just built a dual coil .9 ohm setup in the Tobe and I'm just vaping while I wait for the tracker to update. USPS is so damn slow at times.
The Tobe looks very nice on my copper Nemesis clone. I can't wait to pull one coil and throw that bad boy on the Cana. I think the orange and copper will look very nice.
I even ordered 150 ml of juice from Heather's Heavenly Vapes to arrive on Monday. My wife said quote "It feels like your getting ready for your baby to be born".
Here's 2 pics of the Tobe and the ohm reader while we all wait:
View attachment 351043
View attachment 351044
Yep.... many factors to a great vape..... and what "floats my boat may not float yours and visa-versa" I like my vaping simple and as "fiddle free" as possible... here is mine:
All devices are DNA variable wattage using 1200 mah (20 C rated) rechargable batteries and all set to the same wattage setting. (and Darwin)
All cartomizer tanks have 3.0 ohm pre-drilled cartomizers installed.
My juice selection is limited to the same 3 or 4 that I use.
Each device gives me 8 to 10 hours of vaping and never reaches cut-off before I recharge.
Tanks never leak and never any burnt taste. Gives me the desired vapor and flavor.
Cartomizers changed out when flavor begins to drop off, usually around 4 to 5 days if used continually.
I buy the cartomizers in bulk "usually 100 at a time" at a very good price. About a years supply.
I buy my e-liquid in quantities of 100 ml. bottles or larger.
Typical day:
Grab fully charged device.
Fill the 4 ml. tank with e-liquid (through a fill hole). Total e-liquid in tank/cartomizer is 5 ml.
Vape 8 to 10 hours. If out-and-about I take a second identical setup as a spare just in case of a failure (haven't had one yet).
Fiddle free.....satisfies my needs and desires....and that's all that matters to me....
Everybody eventually finds "what floats their boat" and that is what matters....
This is about like me. I have 2 Vaper Shark DNA's (20 and 30) and use prepunched DC cartomizers in 1.5 and 2.0 ohm. I have tried many other tanks, drippers etc. but keep going back to cart tanks. I use 36+ nic so the 1200 mah last me a long time. I carry a 14500 mech. with a 1.6 ohm BDC as a backup. The DNA clone with a purple efest 3100mah batt. doesn't last as long as the 1200mah VS.
These DNA mods seem to be made for cart tanks, don't know why more people don't try them. This clone with a 2 ohm cart at 12 watts puts out almost as much vaper and flavor as my Russian 91 at 1.3 at 15 watts (30pg/70vg).
Where do you buy in bulk from? I have been getting mine from different places when they are on sell + using coupons getting them for $1 to $1.25 apiece. I usually get 25 to 50 at a time. How big and how many holes do they have? Most of the time I have to drill the holes bigger.
The dual coil set up can be a lil tricky with the screws especially with lower gauge wire and getting it to wick properly can be a pain but when it's hitting right it's just heavenly
Sent ya a PM..... edit for it... the dual coils minimum quantity is as shown on the web site.. not what I quoted.... Boge's is 200 minimum quantity...
Yep... 70% Vg doesn't wick as well as say a 70pg/30vg juice so larger holes help.....
Last edited:
re; the fogger V4;
-tightly twisted 32 and 30 ga. A1 (gets to a nice temperature without the extended heatup time of fatter wire and fits on those short machine screws).
-lightly annealed (don't let it get bright cherry red).
-11 wraps around a #38 drill bit (0.101), (at this size the wicks are easier to fit into the juice channels).
-lightly torched and squeezed together (again not bright cherry red, it makes the wire/s brittle).
once both coils are installed and the hot spots squeezed out i end up at 0.9 ohms. 22 watts gives me a great vape on a cana mod.
it is a bear to build the fogger but once you figure it out it really is an awesome vape, kind of like an auto dripping magma.
Last edited:
Coil wrapping | Steam Engine | free vaping calculators
Ohm's law | Steam Engine | free vaping calculators
Battery drain | Steam Engine | free vaping calculators
DIY e-juice | Steam Engine | free vaping calculators
https://docs.google.com/spreadsheet/ccc?key=0AhCCsGn6F0QLdDJxNzV2c0dSc01mUkl6RXNnM2o2R1E&pli=1#gid=0
http://coiltoy.ermeso.com/
Ohm's law | Steam Engine | free vaping calculators
Battery drain | Steam Engine | free vaping calculators
DIY e-juice | Steam Engine | free vaping calculators
https://docs.google.com/spreadsheet/ccc?key=0AhCCsGn6F0QLdDJxNzV2c0dSc01mUkl6RXNnM2o2R1E&pli=1#gid=0
http://coiltoy.ermeso.com/
Last edited:
Thanks, I'm just getting the hang of dual coils their is a bit of a learning curve.
The other day I went through 10 coils trying to setup my new magma.
I gave up and threw in the coils it came with. 2 32 gauge 5 or 6 wraps on 2 mm silica.
I couldn't believe it it is hitting great and blowing huge clouds go figure
I hear those okr chips are good and reliable. For about sixty bucks I'm going to guess that's the cost of parts and you built it yourself. I've been considering trying to build one. Been watching videos on how to solder as I have absolutely no experience whatsoever. Also been looking at wiring diagrams, schematics, etc. from mamu builds and others. It's like another language to me. Lol. If I do decide to try then the first one will cost me a bit more as I'll need soldering iron, clipping stand thing, tools, and whatnot. I'm interested in building the okr 10 and the other one that company came out with which I think is called the okl2 t20. Also the raptor chip which is hard to come by at the moment.
Herb, sorry I didn't want to throw anyone for any loops. Was trying to be as cut and dry as possible. I like the box for what it's worth and the quirks and issues I've found with mine don't bother me. I can add that it only needs a second click to fire out of sleep sometimes. Maybe around 3-5% of the time. I'm going to guess the next time I have any additional information it will be when the mod is dead, hopefully.
- Status
