Attack of the Hana Modz Clone. Let's wait together!

[wetwire]

The jwrap clone wrap sounds like it is for the Hotcig/FT version (the one with the split top) So the Cloupor should be the regular Hana V3 wrap perhaps and not what he is listing as clone? Anyone measure them yet to verify?

Anyone notice that the point at which regulation can be done drops with battery voltage (which I thought would happen) BUT not at the proper rate for actual battery voltage (which does not make sense) Current battery voltage is approx. 3.7v however regulation is not possible until wattage is raised to 21.1w - 21.3w (also a variable probably due to battery sag) when it should be around 17w - 18w even accounting for voltage drop with a .8Ω load. I am wondering how it determines where to set cutoff at. Current only and has no actual voltage measuring being done? All the rest is proc math? I dunno.

 

[kurtus]

I have mentioned this already but the v3 clone wrap made by jwraps is for the cloupor clone. They just don't make it with the bottom piece cut but it's really easy to do.

 

[CurlyxCracker]

View attachment 344265
I have mentioned this already but the v3 clone wrap made by jwraps is for the cloupor clone. They just don't make it with the bottom piece cut but it's really easy to do.

I think it's also been said the regular v3 wrap fits as well... So what's the difference... What do you "bottom piece cut"?

 

[bryyyan]

I think it's also been said the regular v3 wrap fits as well... So what's the difference... What do you "bottom piece cut"?

On the bottom of the cloupor is in two pieces. (The bottom of the mod and the bottom of the battery door)

The jwraps v3 clone wrap doesn't have that piece pre cut.

It's really simple to cut it though. I applied the bottom piece to the mod then used a blade to cut it.

 

[Fullknight]

Anyone know the coupon code for jwraps.
And are they paypal only?


Sent from my iPhone using Tapatalk

 

[CurlyxCracker]

OK so the regular and clone v3 jwaps fit the coupor?

 

[IzzyD]

Coupon is "20off" but not sure about other payment methods


Sent from my iPhone using Tapatalk 2

 

[IzzyD]

OK so the regular and clone v3 jwaps fit the coupor?

I apparently sent a clone wrap and genuine hana wrap and there's no difference in measurements.

I've sent jwraps an email to ask what the differences are


Sent from my iPhone using Tapatalk 2

 

[retird]

Anyone know the coupon code for jwraps.
And are they paypal only?


Sent from my iPhone using Tapatalk

Like said "20off".. and CC or Paypal....

 

[wetwire]

Well see, that makes no sense about why Jwraps would make a new selection for the clone unless it is different from the real V3 unless it is AND the other clone is even still different and Jwraps just does not know the difference. I read somewhere that the actual over all dims of the clone was different but, do not remember if it was the Cloupor clone or the others. As I know the FT version is the older style back plate. Thanks for the pic. It helps a little. Wish JIwraps posted measurements but that would be a lot of work for them i suppose.

 

[kurtus]

There are tiny differences in the dimensions and the vent hole for the battery is in a slightly different spot from the information I've read.

 

[munsterrr]

Not showing off what we already know lol. This is the vaporskinz skin. It doesn't fit perfectly. An exacto knife fixed the excess over hang. You can see the imperfections here and there.

Sent from my 831C

 

[saqueeb]

received mine yesterday not even through an entire battery and now it is stuck on "locked click 5x to unlock" no amount of clicking will unlock it.

was just vaping on it w my kayfun, didnt short....no idea why this is happening.

clearly these things are not as good as they are supposed to be.

 

[CurlyxCracker]

received mine yesterday not even through an entire battery and now it is stuck on "locked click 5x to unlock" no amount of clicking will unlock it.

was just vaping on it w my kayfun, didnt short....no idea why this is happening.

clearly these things are not as good as they are supposed to be.

Pull your battery for a minute or two. Most seem to be enjoying these devices, few issues, of course.

 

[saqueeb]

i'll give it a shot

 

[Mr.Bungle]

I'm following everyone's comments on these clones intently. Have you tried to remove the battery? That may reset the chip and get you rolling again.

received mine yesterday not even through an entire battery and now it is stuck on "locked click 5x to unlock" no amount of clicking will unlock it.

was just vaping on it w my kayfun, didnt short....no idea why this is happening.

clearly these things are not as good as they are supposed to be.

 

[saqueeb]

it is currently removed

 

[CurlyxCracker]

i'll give it a shot

It shouldn't load back into locked mode. Also is it recognizing your button presses (ex. Is it coming out of sleep and displaying the 5x message)?

 

[dwcraig1]

i'll give it a shot

By all means let us know what happens.

 

[saqueeb]

loaded right back to locked mode, switching modes and stuff work fine but the screen will not display anything but the locked screen when putting the battery back in. coming out of sleep it shows the lock screen as well.