Best Cartos/Attys for Buzz Pro?

[Bovinia]

Viscan, what cartos are you normally using right now? There is no reason to restrict yourself to 1.5 to 2ohm with the BuzzPro. You'll get best results with 2.5 to 3ohm, altho there are lots of people who enjoy the dual coil cartos.

madvapes and Ikenvape both are good sources for the XL or Mega cartos that will fit the 1.5" tank size. I'm sure there are plenty of other places that sell them as well, just look for XL or Mega.

 

[vicsan]

Viscan, what cartos are you normally using right now? There is no reason to restrict yourself to 1.5 to 2ohm with the BuzzPro. You'll get best results with 2.5 to 3ohm, altho there are lots of people who enjoy the dual coil cartos.

Madvapes and Ikenvape both are good sources for the XL or Mega cartos that will fit the 1.5" tank size. I'm sure there are plenty of other places that sell them as well, just look for XL or Mega.

I use 2.0 Boge, black and DC 2.0 black and I have a few DC 1.5-2.0 Clear cartos...all on my 3.7v Reos.

I'd want SS cartos in a tank. So, I'm looking for 2.5-3.0 XL DC SS? And the Mega's will fit the tank? That's good to know. I was thinking about battery life too. Do the DC XL 2.5-3.0 drain the battery faster?

Thanks for your help!

 

[Bovinia]

Honestly I can't say about the 2.5 to 3.0 DC's because I haven't tried them. Someone else can probably answer that question.

I do know that LR cartos (below 2.0) in DC or regular single coil will reduce your battery time, and if you push them past around 4.7v then you'll be drawing too many amps and either the Buzz over current protection will kick in or the battery protection will. There is no need for LR on a VV device, as LR was made to give the 3.7 mods the simulation of higher voltage.

I can only speak to my best experience for my taste and that's a 2.5 Fusion from Ikenvape or a Boge 2.8 to 3.2 from many vendors. I vape mostly around 4.3 to 4.7v. I hope that helps you some

 

[vicsan]

Honestly I can't say about the 2.5 to 3.0 DC's because I haven't tried them. Someone else can probably answer that question.

I do know that LR cartos (below 2.0) in DC or regular single coil will reduce your battery time, and if you push them past around 4.7v then you'll be drawing too many amps and either the Buzz over current protection will kick in or the battery protection will. There is no need for LR on a VV device, as LR was made to give the 3.7 mods the simulation of higher voltage.

I can only speak to my best experience for my taste and that's a 2.5 Fusion from Ikenvape or a Boge 2.8 to 3.2 from many vendors. I vape mostly around 4.3 to 4.7v. I hope that helps you some

That's exactly what I needed to know. Thanks so much!

 

[Bovinia]

My pleasure Vicsan! VV is truly an amazing experience for a vaper and I'm sure you'll find your own sweet spot

 

[KeysBum]

This might be a good place to ask this question:
I have had a Buzz Pro in my cart at notcigs.com FOREVER just mulling it all over and I really want the 5ml tank, but don't see the cartos on the site I would need for it. I know I don't have any SS 50mm or 2" cartos. Where would I find them? I'd want SR 1.5-2.0 probably...unless someone else recommends something different. I want to make sure I get the correct ones for the 5ml tank when and if I decide to get this Buzz Pro beauty. I chain vape so a 5ml tank is a must have for me. If someone could give me links to what I need, I'd really appreciate it. Thanks!

I'll be getting the 510 connection

This is a new product for Boge, or at least new to me. I just picked up 15. They are the exact same size as the Smoktech DC's
5pc 1.2ml Boge 510D XL Soft Cap Empty Cartomizer(2 colors) [Boge 510 D XL] - $6.00 : Healthcabin Electronic Cigarettes - Wholesale and Retail--

 

[hificat101]

"I do know that LR cartos (below 2.0) in DC or regular single coil will reduce your battery time, and if you push them past around 4.7v then you'll be drawing too many amps and either the Buzz over current protection will kick in or the battery protection will. There is no need for LR on a VV device, as LR was made to give the 3.7 mods the simulation of higher voltage."

Thanks Bovinia. I just wish the choices were more plentiful on SR cartos. It seems like 85% of the hardware available today is all LR. You have to look just a bit harder for SR hardware.

I'll add that I'm not sure who mentioned the Fusions, but they are quite good. I'm vaping on one right now on my Prodigy at 3.7V. I think they are comparable to Resurrectors, which I wish I could also get in SR. I ordered some LR ones for the Prodigy, and some SR ones for the Buzz I'm hoping to save enough money to buy in the next month or so. Now I just need to figure out if I want black with brass, or root beer with brass.

 

[MaxUT]

Vicsan, take a look at the Ikenvape Mega 510 cartos in stainless steel. These perform well in my J-tank and are very consistent. Be sure to get the 3.0 ohm version for the best results on a variable voltage device; they are less sensitive to power adjustments, so it's easier to hit your sweet spot.

My experience has been that cartos of 2.5 to 3.0 ohms will operate right in the middle of the Buzz's voltage range.

 

[Bovinia]

Thanks for the link Keys, I haven't seen the XL boges either!

Hificat, I personally love the Fusions and they are great in a tank

Max, thank you for pointing out another great carto from Ikenvape! I tend to get tunnel vision and zero in on what works for me...I need to adventure more LOL

 

[arbogast]

This is a new product for Boge, or at least new to me. I just picked up 15. They are the exact same size as the Smoktech DC's
5pc 1.2ml Boge 510D XL Soft Cap Empty Cartomizer(2 colors) [Boge 510 D XL] - $6.00 : Healthcabin Electronic Cigarettes - Wholesale and Retail--

How do they perform compared to the 'classics'? Worse, same, better - or are they rogue boge ?

 

[KeysBum]

How do they perform compared to the 'classics'? Worse, same, better - or are they rogue boge ?

I don't know yet. I bought them to use in tanks. but havn't used one yet.

 

[KeysBum]

OK curiosity got me. I just filled one. Except for the size, I can't tell any difference.

 

[Bovinia]

Thank you for being our guinea pig Keys

 

[KeysBum]

Thank you for being our guinea pig Keys

oink oink.

 

[vicsan]

Vicsan, take a look at the Ikenvape Mega 510 cartos in stainless steel. These perform well in my J-tank and are very consistent. Be sure to get the 3.0 ohm version for the best results on a variable voltage device; they are less sensitive to power adjustments, so it's easier to hit your sweet spot.

My experience has been that cartos of 2.5 to 3.0 ohms will operate right in the middle of the Buzz's voltage range.

Thank you! I will definitely check them out.

 

[vicsan]

This is a new product for Boge, or at least new to me. I just picked up 15. They are the exact same size as the Smoktech DC's
5pc 1.2ml Boge 510D XL Soft Cap Empty Cartomizer(2 colors) [Boge 510 D XL] - $6.00 : Healthcabin Electronic Cigarettes - Wholesale and Retail--

Thanks so much! Those look to be a real bargain! 83 cents each? That's hard to pass up! What does the "D" stand for when they say 510D in the description?

 

[arbogast]

I believe I saw an answer from a healthcabin guy (named sun- something) who said it stood for 'disposable'.

anticlimax, really

 

[KeysBum]

I believe I saw an answer from a healthcabin guy (named sun- something) who said it stood for 'disposable'.

anticlimax, really

Correct....

 

[KeysBum]

Thanks so much! Those look to be a real bargain! 83 cents each? That's hard to pass up! What does the "D" stand for when they say 510D in the description?

$1.20............

 

[vicsan]

$1.20............

Sheesh...really bad memory I have. I was doing math for 6 for $5 and it's 5 for $6. I need to write EVERYTHING down or it's lost. Getting old SUCKS...I don't recommend it!

I've always thought all cartos are disposable? It's kinda strange they actually differentiate these as being so.