The costs of running this huge site are paid for by ads. Please consider registering and becoming a Supporting Member for an ad-free experience. Thanks, ECF team.

Billow RTA by EHPRO & Eciggity

Discussion in 'RTA' started by Jamandre, Nov 6, 2014.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. Jamandre

    Jamandre Senior Member ECF Veteran

    May 5, 2014
    OK, look at this baby. Here is the write up from Eciggity.com

    "We have collaborated with EHPRO to create our new atomizer, the Billow RTA. It features 4 deep juice channels as well as a 4 post design for easier building. It has 2 large 2.5mm airflow holes (bigger than the Orchid or Fogger v4/5) which can both be adjusted separately with the adjustable airflow pin located on the bottom side of the atomizer. On the deck, it features 2 large raised cyclops airflow holes to distribute the airflow evenly throughout the entire coil and to help prevent any leakage. We reduced the size of the chimney as much as we could to preserve the flavor while giving enough space on the deck for you to build on. We opted for a simple yet sleek look, so we made the body out of thick pyrex glass which can hold up to 5ml of liquid. The bottom 510 connection is made out of copper and is also adjustable. For those of you who are tired of constantly dripping and just want a RTA that can rip clouds and produce flavor like RDAs do, this one's for you!"

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Interesting deck. Not even on the EhPro site yet.
    Expected release date is 21st Nov 2014
     
  2. inswva

    inswva Do you even squonk, bro? Verified Member ECF Veteran

    I'm in if the price is right. Looks pretty good.
     
  3. Heespharm

    Heespharm Ultra Member Verified Member ECF Veteran

    Sep 7, 2014
    Htown,tx
    Looks like the orchid... Things I like:
    -raised air hole
    -glass tank
    -5ml capacity


    Sent from my iPhone using Tapatalk
     
  4. bholcomb22

    bholcomb22 Super Member Verified Member

    May 13, 2014
    Denver, CO
    Thanks for sharing.... This one has my attention.
     
  5. Jamandre

    Jamandre Senior Member ECF Veteran

    May 5, 2014
    At Eciggity's site it's posted at $29.99
     
  6. inswva

    inswva Do you even squonk, bro? Verified Member ECF Veteran

    *sigh*... pre-order price, of course. I guess $30 isn't much of a gamble. I may have to pull the trigger.
     
  7. Jamandre

    Jamandre Senior Member ECF Veteran

    May 5, 2014
  8. Afcarmona

    Afcarmona Senior Member Verified Member ECF Veteran

    Jun 18, 2014
    Las Vegas NV USA
    $30 American dollars? Well gosh darn - I'm in... been wanting to get something along the lines of an orchid...
     
  9. inswva

    inswva Do you even squonk, bro? Verified Member ECF Veteran

    I don't see where it indicates the diameter. Hoping it is 22mm.
     
  10. TheKiwi

    TheKiwi Vaping Master Verified Member ECF Veteran

    Interested!

    Wonder how tall it is though.... Looks long as hell


    Burping out loud using Tapatalk
     
  11. Kryp2nite26

    Kryp2nite26 Senior Member Verified Member ECF Veteran

    Jul 13, 2014
    Illinois
    Interested in this also. I actually hope its smaller than the "standard" 22mm.
     
  12. Kryp2nite26

    Kryp2nite26 Senior Member Verified Member ECF Veteran

    Jul 13, 2014
    Illinois
    Someone from eciggity is talking about it in a thread over at reddit. He confirmed it is in fact 22mm wide.
     
  13. inswva

    inswva Do you even squonk, bro? Verified Member ECF Veteran

    Sweet. Thanks for the update.
     
  14. Heespharm

    Heespharm Ultra Member Verified Member ECF Veteran

    Sep 7, 2014
    Htown,tx
    Ok more things.. Knurled top and bottom cap, Phillips head screws
     
  15. Mrez

    Mrez Super Member Verified Member ECF Veteran

    Well, I just got an Orchid V3 and have had some issues with it, standard stuff, leaks, dry hits, and most importantly, not enough liquid capacity. This looks like it might fit the bill nicely. I was gonna pull the trigger on the V4 and a Lemo for my driving vape set up, but I think I can hold onto the Kayfun for a bit longer. Not sure about the pre order though, and how well does Ehpro do with the screws on their clones? My kayfun lite is a an Ehpro and I was pretty happy with the screws on that.
     
  16. SkvLTD

    SkvLTD Super Member Verified Member ECF Veteran

    Nov 10, 2013
    MD
    Oh goody! Finally drilled posts and RAISED air holes. Plus ciggity is a solid store.
     
  17. I'm so happy to see another rta. Had a square, moved up to a orchids, and this looks like another one that will be added to the collection.
     
  18. mrfixit

    mrfixit Senior Member Verified Member ECF Veteran

    Oct 28, 2012
    Akron, Ohio
    Now if it would just build itself and jump up to my mouth so I can vape on it,it would be perfect! I'm in for this one. Once you start using rda's it's hard to use much else.
     
  19. Cloudz4Days

    Cloudz4Days Super Member

    I'm ordering this bad boy. I have 3 orchids , fogger v4.1, and tons of drippers. Another rta would be awesome. This thing looks cool
     
  20. roxynoodle

    roxynoodle Unregistered Supplier ECF Veteran

    Jun 19, 2014
    Ohio
    I'm in, too. Looks great!
     
Thread Status:
Not open for further replies.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice