Boge Revolution V2 Bottom Feed

[heXy]

Happy to announce that it's on the way from NFN. Can't wait to try this thing out!

10ml bottle and 850mAh internal batt, seems decent. Only down side is it's a 3.7v mod.

 

[tybin]

i saw that a guy took it apart and the battery was only 600mah

 

[heXy]

That's interesting; I might do the same. I've read many comments about the bottle only being a 6ml and the batt a 600 or 650. Guess I'll have to wait and see. I don't vape anywhere near 6ml a day so I could care less.

However NFN has on it's site that it's a 850mAh and 10ml, even the worst case scenario of 6ml/600mAh; that's still more than enough for me with the USB passthrough ability as well.

 

[Concat]

It ONLY uses cartomizers? What? Does it have proprietary threads or something?

And wow, $70 for a bottom fed mod, full kit? Not too shabby, even considering it’s shortcomings…

 

[heXy]

That's the full kit, 5 carts, usb wall adapter and usb cable. There have been reports of atty's fitting on it (with some tweaking of the feeder needle), but the threading is short. I suppose it was designed around their carts, which is what I use daily anyhow.

I can try to light up the 510 atties I use for dripping once it arrives.

Edit: Specs from manufacturer:

-Bottle liquid supply
-Compatible with 510 cart/atty's
-Passthrough
-Built in polymer li-ion battery @ 650mAh (seems you were correct tybin)
-Battery display
-Negative Ion air supply
-On/Off switch

 

[TallGrass]

only used cartomizers probably because of how far the needle extends, not exactly sure though. I watched nicfits video and I dont think he says specifically why; just that atty's dont work.

Nice little mod.. apparently it has a third switch setting that purifiers air (whatever.)

 

[sparky604]

Happy to announce that it's on the way from NFN. Can't wait to try this thing out!

10ml bottle and 850mAh internal batt, seems decent. Only down side is it's a 3.7v mod.

Was totally looking forward to this until Primo said it's not recommended for use with LR cartos, which is all I use generally Will be interested in seeing how it works for you!

 

[AlmightyGod]

only used cartomizers probably because of how far the needle extends, not exactly sure though. I watched nicfits video and I dont think he says specifically why; just that atty's dont work.

Nice little mod.. apparently it has a third switch setting that purifiers air (whatever.)

Watch the video and read the comments again...you can use atomizers on the unit...

Was totally looking forward to this until Primo said it's not recommended for use with LR cartos, which is all I use generally Will be interested in seeing how it works for you!

There is no reason you can't use a Boge LR 2.0 carto on the unit...

 

[Mildew]

i saw that a guy took it apart and the battery was only 600mah

Actually they are only 500 mAH..
LR attys and cartos are fine. As I've posted elsewhere, the center contact on the atty doesn't always reach and just needs a little easing out to make connection.

 

[AlmightyGod]

Actually they are only 500 mAH..
LR attys and cartos are fine. As I've posted elsewhere, the center contact on the atty doesn't always reach and just needs a little easing out to make connection.

How do you know this for sure about the battery?

 

[heXy]

I'm starting to find the different reports on the battery amperage a little strange. Now it seems to be anywhere from 500mAh - 800mAh..

And Boge states it's a 650mAh, thank god it's USB passthrough. With my vaping habbits, I find an eGo 650 lasts me all day without charging.

 

[Mildew]

How do you know this for sure about the battery?

Because I've already replaced the original with an 18650.

 

[AlmightyGod]

Well...that's a long frickin way from the 850mah that was advertised! Thanks...my hopes for this mod just took a nosedive! Disappointing.

 

[heXy]

Because I've already replaced the original with an 18650.

Do you have a picture with the battery replaced? Id like to take a look at how/what was done.

 

[Pipeous]

no wonder they say to be careful with lr. 500mah is tiny and might not be capable of handling the power draw for long. then the battery replacement tutorials will become common. I was considering this but 500 mah I'd kill in no time. I do have my usb at work as I drag my netbook along but still. 10ml bottle and a weenie battery. should have gone bigger battery and smaller bottle

 

[AlmightyGod]

Personally, I'd like to know why all of the pre-sale specs showed an 850mah battery, & then it's shipped with a 500mah battery. I'm very unhappy about it!

Screwed by China, yet again.

 

[doots]

Because I've already replaced the original with an 18650.

Mildew , how did you replace it? can you describe?

 

[heXy]

If they're easy to take a part without damage, I'll do so when it arrives. It's advertised on the manufacturer's page as 650mAh, if it's not I'll be disappointed. For me, it would only impact battery life, lately I've been using standard resistance and still find it satisfying.

If it's a bottom feed with 10ml supply and a usb passthrough for $80 shipped, it's a win for me lol

 

[Mildew]

It's a fairly straight forward mod, popping the case open should reveal all.
No detailed photos as I just did a quick job to see if everything worked as it should.
I plan to tidy it up and take some more photos. If no one else has done a tutorial by then I'll see what I can do.

 

[heXy]

It's a fairly straight forward mod, popping the case open should reveal all.
No detailed photos as I just did it roughly to see if everything worked as it should.

Thanks for that! Looks painless.

Edit: Interesting thread here on the RevoV2

With some happy customers using LR's on it, boasting 6 hour life span. Not too bad IMO.