Buy a Rebuildable Atomizer

[Twitteliedoe]

I have a AGA-T+ on the way, a Phoenix v3 and a MOV Corsair.

To Twitteliedoe I'd suggest you get at least one vv device (provari, VAMO, Zmax, evic etc) with built in protection ( short circuit etc) that also has a ohms meter built in to get started with rebuildables (Genesis style, dripping or tank rbas) Once you get coil building down and can make them to the resistance you want to vape at on an unregulated mod by all means get a mechanical. Or just a mechanical with a kick and just buy an ohms meter. They're many different ways of achieving your desired vape.

Thanks for the input,

I truly appricate it. In regards to the building part. I won't have problems with the mechanical or electronic side of it, since that's the line of work I am in. There's just so many brands out there, It's just crazy to buy em all and try em out.
Again thanks for the names, I have my work layed out. lol

 

[Skepticide]

Currently using Innokin MVP with a vivi nova, fixing to order a pair of AGA-T2, one of which I will mod for dual wicks and drill a 2nd air hole so that each wick is pulling air directly across it. It should be a beast once I get it on a 6v mod.

 

[muttmonster]

Does anybody have any experience with the Reomizer? Do RBA's leak if you just toss them into a gym bag?

 

[Guzziman]

It depends what you want to vape with the rebuildeble, it's great when you want to vape fruity liquids or magic fairy but for my tabacco liquids i prefer a vivi nova or a kanger T 3, this are clearomisers.

 

[sereil46]

I have a vision eternity and although it seems to enjoy leaking a bit even when its not flooded its still a good vape. I bought some pre made coils with the posts (5 for $10) bought them more just to have extra posts in case I lose some. I also use a smok r tank with SS mesh its a pretty good vape as well. I'm going to buy a couple more rebuildables to stock up and there cheaper in the long run.

does it like to leak every time or just once in a while?

 

[beast1911]

It will leak when some ejuice goes into the air hole under the coil. Not a lot just a few drops, its hard to tell if it does it every time its filled but it doesn't seem like it. I just vape like normal and at the end of the day clean out the center post. You could always fill it off a device then blow lightly and clean w.e juice comes out.

 

[Vito Capone]

I jumped into the RBA world with a did mini clone and after some fiddling with the mesh and wire i finally got a good vape from it. I recently got an A7 and out of the package it has been a great vape I haven't rebuilt this one yet but will be within the next week or so. I ordered an AGA-T+ today mainly because you can go either SS mesh or Silica wick (gonna use it both ways and see which way i am more cut out for building wise) Good luck to anyone making the jump into RBAs as im sure i will need some!

When you get the chance, check out the ceramics in the AGA. I know there is a ton of hype right now but run a bit of juice with that as your wick and you will see why. I have 2 AGA's set up with the ceramics and they are out of this world good.

 

[Kanj.nguyen]

When you get the chance, check out the ceramics in the AGA. I know there is a ton of hype right now but run a bit of juice with that as your wick and you will see why. I have 2 AGA's set up with the ceramics and they are out of this world good.

Got myself a couple of FC2000 on the way, this makes me even more impatient

 

[Vito Capone]

Got myself a couple of FC2000 on the way, this makes me even more impatient

Certainly worth the wait!

 

[Kanj.nguyen]

Certainly worth the wait!

How long does one last for you and how likely are they to break? Im not exactly a hopeless klutz but the wicks sell out so damn fast it makes me nervous for replacement.

 

[Vito Capone]

check out the fc2000 ceramic wick thread in the rebuildable atomizer section, there are a couple on there that have been in the tanks for 3 weeks so far and still going strong. I had the fc2000's in mine for two before I pulled them out to try out the bubble stone wicks.

They are fragile, I bought six my first go and broke two. Luckily the first two I put in I didn't break otherwise I might have gotten too frustrated to continue.

 

[Kanj.nguyen]

What is this bubble stone wick? My god youre killing me

 

[disaznrush]

I'm pretty sure it the bubble stone you buy for the fish. You have to cut it up and fit it to the wick hole

 

[Vito Capone]

I learned about these from Scubabatdan's videos on youtube, there is a bubble stone sold at Petsmart that I cut and form into wicks, search youtube for Scubabatdan. He has done a few videos on making them and using them. These are fantastic too!

 

[Kanj.nguyen]

Really? Is the cutting into wicks part difficult? Because if it is easily feasible then replacement wicks will never me a problem again. How are bubble stones compared to fc2000 in your experience so far?

 

[Vito Capone]

not too bad at all, I stopped by ps yesterday and grabbed two stones for 3 bucks a piece just in case. picked up a diamond cutting wheel for my dremel for 15 bucks and went to work. I had them formed and in the tanks in 20-30 minutes?

so far the experience is a bit better with the stone as far as wrapping the coils. they can be formed a bit thicker so not as fragile. Flavor is fantastic with both with no difference between the two. I ended up buying the shorter stone and figure I can get probably 12-14 wicks out of each stone. I should have bought the longer ones but I will know for next time. Make sure if you go that route, get the uncolored gray stone and not the blue or white.

 

[rickyshuman]

I'm currently vaping on a Reo Grand with a ERA rba great set up.

 

[drobbyb]

Hmm, makes me wonder about cut and stacked stainless steel mesh circles with a small stainless steel post in the center to hold it all together. Would keep it all nice and centered eliminating the need to oxidize.

 

[Kanj.nguyen]

not too bad at all, I stopped by ps yesterday and grabbed two stones for 3 bucks a piece just in case. picked up a diamond cutting wheel for my dremel for 15 bucks and went to work. I had them formed and in the tanks in 20-30 minutes?

so far the experience is a bit better with the stone as far as wrapping the coils. they can be formed a bit thicker so not as fragile. Flavor is fantastic with both with no difference between the two. I ended up buying the shorter stone and figure I can get probably 12-14 wicks out of each stone. I should have bought the longer ones but I will know for next time. Make sure if you go that route, get the uncolored gray stone and not the blue or white.

A dremel... Hm that is going to be a problem, i do these things in my dorm room and power tools just dont belong there.

How much would you theoretically charge for each stone wick if say i buy them from you?

 

[lancec50]

I just got an AGA T+ the other day. Running a VMax that I snagged of the buying and selling thread. Also bought a SmokTech rebuildable Vivi tank and have that on a Zmax that I also snagged off the buying and selling thread. Having a blast with the AGA first started out with a cotton wick and vaped like a champ now using a SS mesh wick. Took a little trial and error but seems to be running really good now. I ordered a 12"x12" sheet of 400 SS mesh and waiting for that to come in. Can't wait to tinker some more. Have another AGA T+ coming and an IGO L dripper coming from a CO OP. That I'm so excited to try out the dripper.

Sent from my Galaxy Nexus using Tapatalk 2