Cannon Beta Thread

[mwa102464]

Tell ya what,, I now put the 1.8ohm Cannon on a tube mod to drip with it, I was running a big AW 3.7 Batt and the flavor was great, I decided to put my 5v Batt in my mod and take a chance and Whoa, super plumes of fantastic flavor I cant believe what a nice combo this is I'm thinking the 2ohm Cannon may be even better with this 5v Batt but this 1.8ohm Cannon on the 5v Batt is pure dripping Bliss people !!! These Cannons are super Attys for Bottom feeders or dripping both work great and these Atty's are strong azz Atty's that perform extremely well and I mean extremely well.

 

[mwa102464]

So, how does the preformance of the Cannon compare to the 801 Mini atomizers? Seeing that the internals look the same, they should preform the same, no?

The 510 threading might just be the solution to my center pin issues

NO, Not at all from my findings, I'm not sure because I haven't dissected one yet and maybe it's just the combination of the 510 connector with the big Azz Bridge and internals of which look like the Mini 801 but these Atty's are tighter than the 801's how they vape in my opinion and also way out perform the Mini 801 in my opinion as well.

 

[sashwa]

Tell ya what,, I now put the 1.8ohm Cannon on a tube Mod to drip with it, I was running a big AW 3.7 Batt and the flavor was great, I decided to put my 5v Batt in my Mod and take a chance and Whoa, super plumes of fantastic flavor I cant believe what a nice combo this is I'm thinking the 2ohm Cannon may be even better with this 5v Batt but this 1.8ohm Cannon on the 5v Batt is pure dripping Bliss people !!! These Cannons are super Attys for Bottom feeders or dripping both work great and these Atty's are strong azz Atty's that perform extremely well and I mean extremely well.

mwa, have you tried these on a Reo or Woodvil yet? I'd like to try either the 2.0 or 2.5 on my Woodvil. As well as on my UltraMax.

 

[tybin]

gimmie gimmie when when? hi Iken

 

[Tat_skull]

I was fortunate enough to have a 2.0 stainless cannon and a 3.5 stealth cannon in an order that arrived on Monday. I have been using the 2.0 on a Empire Mod with a 901 to 510 adapter and an AW IMR 18650 powering it. This atty makes all my juices shine!! The flavor on this atty is just incredible. I am thoroughly impressed. Now the throat hit for me is just where I like it for my juices(sweet flavors 70/30 pg/vg). It's not overpowering, but you feel it! Now the vapor that this atty produces Is off the charts. I just love seeing the pillows this atty produces. Now as mwa has mentioned, this atty is hard to flood!,(but I have accomplished it a couple of times). Also the draw on this atty is sooo smmoooooth, and I do mean smmooooooth! Hadn't had an atty quite like this before. All in all I say well done Isaac!!, You my friend have created a masterpiece that WILL satisfy the toughest critics. Job well done. There's only one negativity with this atty, and that is that I can't add it to cart yet!!!

 

[loft]

Tat, I am one of those tough critics. Isaac surely knows this based off of some of the discussions we've had via text. Needless to say, I received one of the Cannon's with my order today. 3.5ohm rating... sexy black... looks like a beast! I'm about to clean up my Reo Grand and then load a new set of LifePO4's in it along with this atty. And while I'm testing this, I'm going to fill the beta clearomizer I got to throw on my Reo Mini... I feel like tonight is gonna be a vape coma night. Be back soon with my results!

 

[loft]

Pics for those interested.

 

[loft]

So my initial thoughts are just... wow. I've been using nothing but HV306 for a while now, and this atty blows me away. Vapor production is on par with 70PG/30VG juice and the flavor is amazing. It's not *as* warm, which allows me to take a longer draw. It also doesn't flood as easy as some of the other 510's I've used. Great job, Isaac!

 

[Timothy Cullen]

cant wait till he gets these in stock. i gotta put it through some paces.

 

[ls1chris]

Same here i want to try these bad boys as im down to my last atty and it is acting up on me.I was going to order some today from isaac but i may wait until i can get one of these cannons as they look amazing and seem to perform great which sounds good to me

 

[Timothy Cullen]

hey fellow kentuckian. his 901s are great if u just cant wait. as are his 306s. im just upset i can get a 510 from him to save my life. and hopefully he will put his DCs up on the site when the beta test gets done(hurry hurry hurry) lol

 

[ls1chris]

Timothy Us fellow Kentuckian Vapor's must stick together as we are few,I agree man isaac has some new products i am dying to try,The Dc cartomizer,The clear cartomizer,His Stealth attys and the list goes on and on lol

 

[5cardstud]

I've been using this 2.5ohm cannon on a VVPV Prototype (a top feeder variable voltage) and it is literally putting out enough vapor that it comes close to being too much. These babies really rock. and the throat hit, taste, etc. is amazing. You guy are going to love these cannons.

 

[Tat_skull]

I got my ProVari back today, so I I decided to give the 3.5 a shot. I began at 5 volt's and increased by .1 sampling each setting. This particular one started to shine at 5.6, but full effect wasn't achieved till I hit 6 volts. I never vape at 6 volts, but with this atty I have no problem. Juice flavor really shines thru(aged BWB MT), once again throat hit is just right, not overpowering but you feel it. I am just loving this atty. The vapor this atty produces is excellent, it is very thick pillowy clouds, and just as the 2.0 I tried, the draw is just incredible, soo smmooooth! So both the 3.5 and the 2.0 get a big from me. Well done Isaac, You are the atty genius!!!!

 

[warlike36]

I just love hearing ya all enjoying......... I had my eyes on the VVPV since it was a drawing. Asked many questions.."contact us" PM's etc. To no avail...

Now I click on a "cannon" and the page just reloads.. Why even tell us if we cant put our hands on it....

I mean...really....Do it in a private setting until us "regular joes" can have just a small chance of obtaining the "good stuff".

 

[Sewknitty]

are we there yet?? when? when?

 

[rockyroad]

are we there yet?? when? when?

Seriously I agree....let's get the show on the road. These are sounding very sweet indeed..can't wait to try one.

 

[Timothy Cullen]

cannot wait. gotta scam my parents for some cash lol... jk gonna mortgage the house so i can be in IKV heaven.

 

[loft]

I've been using this 2.5ohm cannon on a VVPV Prototype (snip)

Ugh!! I've been waiting so long for the VVPV.

 

[mwa102464]

mwa, have you tried these on a Reo or Woodvil yet? I'd like to try either the 2.0 or 2.5 on my Woodvil. As well as on my UltraMax.

Been running them on all 4 of my Reos since Issac sent them to me to Beta test, this is the best Atty I have used yet for any bottom feeder Mod I have had.!! They just don't flood like regular Attys do and I have a habit of squeezing the bottle to much because I love a favorable vape, with that said this will be my go to Atty from here on out until the man comes up with one to top this one.! Did someone say Dual Coil Iken Atty