Cartoz carts E2's etc. post it here

[5cardstud]

Nice work there Ruppy...Can't for the life of me see how it doesn't leak...You said it didn't so that's good enough for me...vape on...vape on!!!!!!

Hype.....It's been thrown around lately...Here is a prime example...306 atties are hyped too provide the absolute best flavor...I ordered five too use on my Infinity...Yeah the one I no longer own...The 306s have the absolute worst threads I've ever seen...The drip tips too fit the 306s were hyped well too....These are HV306s too BTW...They won't screw on, the tips leak madly and the flavor is like licking a monkey's ......I've tried three of the five...The first two worked somewhat and died on the table...The third never did screw in far enough to make contact...four and five are trash can bound...unused....My products lately from this company...Well I'm a little disappointed...I've not spoken with him as of yet...This I can tell you...The Joye 510 kicks the 306 right too the curb...errr trash can....Where they belong...beside the clear-o-mizers....

I only orderd two. The first one I'll have to put a photo of someday. You couldn't vape with it. It looked like an overgrown lightbulb. The second one I couldn't figure out how to use it. I'm not a 306 fan either. I don't like his 510 golds either but the Fusion, I have Joyes, Boges, Clears, E2s, smoke tech, smokers delight, 4081, 808s, vortex, clearomizers, fluxomizers, cool carts, dual coils, ego tanks, ego cartomizers,901s, Map tanks, etc., etc. etc. and there isn't a finer vape around than the Fusion.

 

[El Dee]

I think I may have died and went too cartomizer hell....

I got plenty of drip-tip 510s too...Not real happy with those either...

My Fusions are older and I think lower resistence...Maybe.....Maybe not...Still they're OK

Lately the Boges have been my go too carto.....

Thank the vaping gods for that little Joye 510...I'd be out of vaping without it...

 

[5cardstud]

Them boges are great cartos for sure my friend. I used to use them myself.

 

[TexasT]

I think I may have died and went too cartomizer hell....

I got plenty of drip-tip 510s too...Not real happy with those either...

My Fusions are older and I think lower resistence...Maybe.....Maybe not...Still they're OK

Lately the Boges have been my go too carto.....

Thank the vaping gods for that little Joye 510...I'd be out of vaping without it...

I've always judged every carto I've ever tried against the Joye 510. The flavor and clouds of vape are hard to beat. So I gotta agree with you El Dee.

 

[FranC]

I'm with 5c. The Fusion beats the Joye 501 hands down for me.∞∞∞∞

 

[Ruppy]

Nice work there Ruppy...Can't for the life of me see how it doesn't leak...You said it didn't so that's good enough for me...Vape on...Vape on!!!!!!

Ya know I have no idea how it dosent leak......Guessing the same priciple as those big jug dog bowls. Until the water in the bowl gets drank no more goes in? Either way it goes in when it needs it and wetts the filler. Ive vaped two ML through it with no issues "yet" never know though.

 

[El Dee]

Texas Tee!!!!!!!!

My Joye 510 is an atty...Dripping like a slave!!!!!!!!!!!!!!

Ruppy...That's a great little deal you're working on there Brutherr...I'm hoping it continues too work well..I may have too mod one for myself...The tanks are a novel approach...Most out there have issues however so I've not went there..My style dictates that I drip...Keep up the good work Rup...Much success your way Bro!!!!!!!

 

[5cardstud]

Texas Tee!!!!!!!!

My Joye 510 is an atty...Dripping like a slave!!!!!!!!!!!!!!

Ruppy...That's a great little deal you're working on there Brutherr...I'm hoping it continues too work well..I may have too mod one for myself...The tanks are a novel approach...Most out there have issues however so I've not went there..My style dictates that I drip...Keep up the good work Rup...Much success your way Bro!!!!!!!

My bad. I thought you were talking cartomizers. The VVPV is right up your ally LD. I'e never dripped a 510 before and it's the one I started with. It got me off the stinkies and kept me from wasting money at the mall kiosk.

 

[uzzaperez]

I could never use a 510 for more than a short period of time, usually because I was sampling a bunch of flavors and that doesn't work so well w/ cartos. I like the performance but the carts pretty much sucked, so you drip, and dripping eventually ends up with flooding, leaking, blow out maintenance - thus my preference for cartos.

My points are 1) The VVPV has no juice well, which = an annoying mess w/ a regular atty (for me anyway); and 2) I want to plug empiremods' drip shields, they solve the no-juice-well problem and allow you to flood an atty a little for more time between drips and with no mess.

I've never understood why somebody doesn't just make an adapter with a juice well for no-well devices. Buzzkill, you're probably above jacking the drip shield thing (not that I would be, sorry), but a juice-well-adapter might not be a bad idea for the VVPV?

Anyway, its mostly cartomizers for me anyway...drip less, vape more, keep it clean.

 

[Modrod.]

I've never had much luck with atty's and dripping. I've never had good vapor or flavor from any I've tried. I've thought about trying a feeder though. Old Goat makes them for an affordable price but I'm still unsure if I'd like it.

 

[uzzaperez]

I've never had much luck with atty's and dripping. I've never had good vapor or flavor from any I've tried.

I used to be that way. I used to waste a bit of time arguing with 510 and 901 lovers 'cause I just didn't get it. I couldn't understand how it was possible to prefer atomizers over cartomizers. Then I got a Buzz, found the sweet spot for my 510s, and I get it now.

I've thought about the bottom feeders, but never tried it because I switch flavors too often. Having never tried them, I speak without being educated, but I figure my drip shield gives me a taste of what it's like to slurp up extra juice and, while it's much better than a leaking atty that's always on empty, I still prefer a good cartomizer.

 

[Ruppy]

That sounds like a great idea Ruppy. The FusionTank.
I was thinking about a cartomizer with baffles instead of filler.
I better say this because Wharf will anyway. LOL The idea is baffling me.

So far the fusion tank is working flawlessly Its like a fusion that lasts forever LMAO

I could never use a 510 for more than a short period of time, usually because I was sampling a bunch of flavors and that doesn't work so well w/ cartos. I like the performance but the carts pretty much sucked, so you drip, and dripping eventually ends up with flooding, leaking, blow out maintenance - thus my preference for cartos.

My points are 1) The VVPV has no juice well, which = an annoying mess w/ a regular atty (for me anyway); and 2) I want to plug empiremods' drip shields, they solve the no-juice-well problem and allow you to flood an atty a little for more time between drips and with no mess.

I've never understood why somebody doesn't just make an adapter with a juice well for no-well devices. Buzzkill, you're probably above jacking the drip shield thing (not that I would be, sorry), but a juice-well-adapter might not be a bad idea for the VVPV?

Anyway, its mostly cartomizers for me anyway...drip less, vape more, keep it clean.

Hmmm a juice well adapter.....Could be done but it would stick up on a 510. could make a pretty kewl 510-901 or 901-901 though

Im a big fan of the drip shields myself. Im a 901 atty user so they are perfection together.

 

[5cardstud]

Well i'm very happy that everyone has found the carto or atty that they love. That's how it should be. I'm also happy that my search is over. I wouldn't want to go through it again. I'll still try this and that but everyone knows my favorite. I have to say the Map Tank is my second choice. I've had very good service out of it.

 

[Ruppy]

Well i'm very happy that everyone has found the carto or atty that they love. That's how it should be. I'm also happy that my search is over. I wouldn't want to go through it again. I'll still try this and that but everyone knows my favorite. I have to say the Map Tank is my second choice. I've had very good service out of it.

5card look at the tank vaporescence just launched. Vaporescence - eCigarettes, Accessories, US Made eLiquids

 

[bandmom5]

I love the idea of the fusion tank. Great idea.

 

[PoliticallyIncorrect]

Where do you get your Map Tanks from, 5CS?

 

[5cardstud]

I got mine from clouds a couple months ago. At first it leaked all over the place but I noticed the top inner seal in the E2 was missing so I put one in it and it hasn't leaked a drop since.

Ruppy I'm going to check that out, thanks. It looks pretty cool. I like the idea of using cartos and the flow control. It says coming soon but they're not there yet.

So Ruppy, I should be able to put a Fusion in my tank?
I'm trying it tomorrow. It will be known as the "Ruppy-Fusion Tank".

 

[TexasT]

Well i'm very happy that everyone has found the carto or atty that they love. That's how it should be. I'm also happy that my search is over. I wouldn't want to go through it again. I'll still try this and that but everyone knows my favorite. I have to say the Map Tank is my second choice. I've had very good service out of it.

Its never going to end 5card. We might as well just mail these suppliers our credit cards and drive by their stores and throw our cash out the car window.

We're going to HAVE to have the latest and greatest and things that look like they ought to work.

But I'll still keep my Buzz, Fusions and some mega-808's on hand just in case.

 

[Ruppy]

I got mine from clouds a couple months ago. At first it leaked all over the place but I noticed the top inner seal in the E2 was missing so I put one in it and it hasn't leaked a drop since.

Ruppy I'm going to check that out, thanks. It looks pretty cool. I like the idea of using cartos and the flow control. It says coming soon but they're not there yet.

So Ruppy, I should be able to put a Fusion in my tank?
I'm trying it tomorrow. It will be known as the "Ruppy-Fusion Tank".

Im using a storm tank and cut the slot in the fusion. As long as it seals on both ends should work fine 5C

They have the 3ml tanks just not the big ones
Vape-O-Matic Liquinator 3mL

 

[PoliticallyIncorrect]

Im using a storm tank and cut the slot in the fusion. As long as it seals on both ends should work fine 5C

They have the 3ml tanks just not the big ones
Vape-O-Matic Liquinator 3mL

Ruppy, can you fill in some blanks about cutting the slots? Bear in mind I don't have a machine shop in my garage—nor even a power tool, unless you count a hand drill.

Anybody ever tried these things, or know of someone that did?: 510 Dual Coil Storm Tank - $14.99 : Stormys Vapor Cellar, Electronic Cigarettes & More