Cartoz carts E2's etc. post it here
- Thread starter BuzzKill
- Start date
- th_trl_thread_readers 0
- Status
Thanks El Dee! I ordered a small bottle - 125ml. I am running a little low on some I bought from xtreme vaping. I was very happy with that - but for these prices, and with your recommendation, it is a no brainer,
Okay, I think I've cracked the Fusion code.... for me.
I fill a new cart with about 40 drops using the taryn spin. As soon as I get that first funky taste, do it all over again. I add 15 drops, spin, add 15 more and spin again. I add an additional 3-6 drops spin and use the bottle to suck out any overfill. I'm on my 6th fill and it's working beautifully.
I was spinning on initial fill and then dripping as need be. I seemed every subsequent fill would take less and less drops.
I'm one happy camper
I fill a new cart with about 40 drops using the taryn spin. As soon as I get that first funky taste, do it all over again. I add 15 drops, spin, add 15 more and spin again. I add an additional 3-6 drops spin and use the bottle to suck out any overfill. I'm on my 6th fill and it's working beautifully.
I was spinning on initial fill and then dripping as need be. I seemed every subsequent fill would take less and less drops.
I'm one happy camper
Just got a Vape-O-Matic Liquinator 3mL from Vape-O-Matic Liquinator 3mL and they are well made and work, need to play with better carto's than they ship with but the tank is a good way to keep everything wet and see what's going on. I'll have to cut slots in the bottom to use other cartos with it [seeing cartos flying around shop now], say it doesn't matter how big.
I'll keep you posted.
I'll keep you posted.
Don't forget you promised that, because I just put one of the same things on order...
so far so good, doesn't make the cartos better, like the tanks do for the E2's, just keeps the juice flowing into them, worth it for me
That's the kind of thing I was hoping for. The freshly-filled taste doesn't last long, even with Fushions or DCs; if I can get just that out of it, that will be worth the $25.
Next step is slotting the Fushions.
Ya, that's what I'm waiting for too, have you seen the video? YouTube - TheVaporescence's Channel
yes a little weaker, hoping when get better carto fitted it will be better.
That's the other problem, it's very well made and the seals look like they will hold up to some abuse EXCEPT pulling in/out on the carto, with the o-rings nice and wet the carto will slide in and out wuthout much effort. Not for work, maybe not as good as the COV tanks but less likely to leak, the workmanship is much better so it's a little looser, doesn't depend as much on the friction fit of the COV tanks so i call that better but could use a set screw or two.
I'll check it, no set screw? I need to carry a little allen wrench with my screwdriver, can't have too many tools in your pocket protector
Can you/anyone give me a link? Can’t find anything for Vaporesence don’t think they have a Forum yet, whatever I can’t find it. Wife says when I have to ask her to find something it’s the difference in our plumbing, no other difference [SHE SAYS] and she’s the one who always finds it. somthing about I'm thinking the indoor stuff is a finder.
After a lot of searching/looking I found this thread and post by hairball: http://www.e-cigarette-forum.com/forum/cartomizers/189208-tank-o-matic-liquinator-v4-1-a-18.html#post3362425
I have just started reading from there so hopefully there is more info.
Hairball post......
"I got mine today...not impressed to say the least...the cartomizers are WAY too loose inside of them. The holes need to made smaller so that you need a little force to put them in...then they would stay. I had plans on buying a few more but now I'm against it.
Anyone have any ideas on how to make the carto fit tighter inside the end caps?
Edit: I found a tiny O ring and so far it's worked. I put it on the bottom of the carto and screwed an adapter on. Hasn't moved yet. I can tug downward toward the PV on the tank and it won't budge. I still think they should made the holes a hair smaller."
http://www.e-cigarette-forum.com/forum/cartomizers/189208-tank-o-matic-liquinator-v4-1-a-5.html
"I got mine today...not impressed to say the least...the cartomizers are WAY too loose inside of them. The holes need to made smaller so that you need a little force to put them in...then they would stay. I had plans on buying a few more but now I'm against it.
Anyone have any ideas on how to make the carto fit tighter inside the end caps?
Edit: I found a tiny O ring and so far it's worked. I put it on the bottom of the carto and screwed an adapter on. Hasn't moved yet. I can tug downward toward the PV on the tank and it won't budge. I still think they should made the holes a hair smaller."
http://www.e-cigarette-forum.com/forum/cartomizers/189208-tank-o-matic-liquinator-v4-1-a-5.html
- Status
Similar threads
- Locked
