Cartoz carts E2's etc. post it here

[kwcharlie]

Just did a Boge with just the smallest single slit I could do, I’ll get back if sober/home and let you know. The fusion with the [bigger] single slit started becoming a “slurpee” and leaking a little, nothing getting into the mouth but loud, added some VG [too much] and everything better now with the fusion. The mix seems they need at least 20% VG for Fusions don’t know yet but that’s how I’m going to mix next for refill.
The fusions do “break in” and change as vaped. What volts are you girls using for each?

 

[moorea]

Just did a Boge with just the smallest single slit I could do, I’ll get back if sober/home and let you know. The fusion with the [bigger] single slit started becoming a “slurpee” and leaking a little, nothing getting into the mouth but loud, added some VG [too much] and everything better now with the fusion. The mix seems they need at least 20% VG for Fusions don’t know yet but that’s how I’m going to mix next for refill.
The fusions do “break in” and change as vaped. What volts are you girls using for each?

I'm not sure what volts I am using as I have not taken out the meter since my Buzz Pro arrived! I can tell you that I turn the voltage up a tad bit during the "break in" period then back down once it has broken in! I will grab the voltage meter and tell you shortly!

 

[Bovinia]

My Fusion with 2 slots is still working fine Charlie. My tank has my DIY 70/30 butterscotch cookie in it and I'm set at 4.5. That's the first time I've checked my voltage in about a month LOL

Mine was slurpy when I first filled the tank. I just blew the center hole out from the drip tip thru the bottom into a kleenex like I do if I overfill a regular carto. No more problems...yet

http://www.e-cigarette-forum.com/forum/e-liquid-recipes/208282-my-butterscotch-cookie.html Just in case anyone's interested

 

[kwcharlie]

about 4.5 is what I'm working at too, like the idea of doing voltage changes to breakin the fusions

 

[moorea]

The voltage change seems to help the break in nicely! For some reason I have pain on the top of my foot when I step on it, so I am being lazy right now, but the next time I get up, I swear I will pull out the meter!

 

[5cardstud]

Mine was slurpy when I first filled the tank. I just blew the center hole out from the drip tip thru the bottom into a kleenex like I do if I overfill a regular carto. No more problems...yet

That's because while it's open there is no vacuum so the juice runs into the carto but as soon as you re-cap it the vacuum is back in place. That's also why some people are getting leaks on their tanks. I blow mine out too. It's not that much. I used to crank up the voltage and vape it off.

 

[Modrod.]

You can buy a 5pk of Boge carto's for about 8-9 dollars most places. Just saying.

 

[moorea]

Well my fusion that I filled for the first time a few hours ago just started tasting really bad all of a sudden! I thought maybe the slots were not allowing enough liquid in, so I dripped a few drops up top and it still tastes bad, and is girggly...OK I'M NOT TOO SMART BEACUSE AS I FINISHED TYPING THE WORD "GIRGGLY" I NOTICED ITS NOT MY BUZZ PRO BUT THE HUSBANDS!!! So it is not my Fusion that is tasting bad it is the husbands Boge! So maybe a side by side is not necessary! If after vaping a fusion for a day I pick up a Boge without knowing it and think there is something really wrong with the cartomizer, that might say it all. The husband has taken back his BP w/ Boge and says it tastes fine (although he is a bit put off I made it girggly!)

So I think I just figured out by accident... I prefer the fusion!

 

[moorea]

Later we will discuss HOW I could mistake a shiny purple buzz with purple drip tip, with a black buzz and gold drip tip!

 

[5cardstud]

Well my fusion that I filled for the first time a few hours ago just started tasting really bad all of a sudden! I thought maybe the holes were not slotting well so I dripped a few drops up top and it still tastes bad, and is girggly...OK I'M NOT TOO SMART BEACUSE AS I FINISHED TYPING THE WORD "GIRGGLY" I NOTICED ITS NOT MY BUZZ PRO BUT THE HUSBANDS!!! So it is not my Fusion that is tasting bad it is the husbands Boge! So maybe a side by side is not necessary! If after vaping a fusion for a day I pick up a Boge without knowing it and think there is something really wrong with the cartomizer, that might say it all. The husband has taken back his BP w/ Boge and says it tastes fine (although he is a bit put off I made it girggly!)

So I think I just figured out by accident... I prefer the fusion!

Fusionman agrees.

 

[moorea]

Fusionman agrees.

Is that all you have for me??? When I saw you had replied to the thread I thought you were going to give me a good old fashion making fun of for my stupid move.

 

[moorea]

...........

 

[5cardstud]

No moves here are stupid. Uncalled for, unknown, uncontrolled, but not stupid. Especially from someone that put 24ml. nicotine in their

that's healing from surgery instead of eyedrops. LOL

 

[El Dee]

I got two 510 Liquinators on the way.....I bow too the experts....

Will a Fusion slide into the 510 Liquinator???

I've got Boges and Mega 808s as well.....

I mix all my stuff 80/20....That should play in a tank.....Right?????

Moo somehow or the other my BuzzPro juice well became full last evening...Juice from the finger too the eye was the end result....Nothing like the days of old when Cinnicide was vapable...I gotta try and come up with my own Cinnicide...Memories........Ahhhhhhhhhhh!!!!!!!!!!

A word of caution....You guys are slotting with cut off wheels....In my trade we use some that will eff you up!!! Those wheels abrade while cutting and mix with metal dust in the air...Either use more than adequate ventilation or wear a dust mask....Don't even think of doing this without eye protection....Those sparks stick too yer eyeballs...Ever stared at a drill as it prepares too drill those sparks free??? BTW we call them "Zizz Wheels" here in Dixie....and ours are air powered...I'll be debating chucking mine in the press and drilling...Depending on KW's reply too a smaller slot...The hole size is controllable if drilled...I wouldn't attempt drilling SS other than with a vice and press however....Damn my red light is dim and no blue light at all...

Fresh set in!! Hopefully my stuff will begin arriving tomorrow....I got 3 sets of 16340s coming...They'll be ready for Freddie when order 1963 arrives....I've abandoned the search for the lost PV...I'm hitting my Beta BP solely now...I guess most of you have been receiving your BPs here lately...Awesome Huh?? I weighed replacing the lost PV...It did have features I really liked but at the end of the day a lite weight long lasting PV won out...

Now if that tank gets me too Nirvana........

 

[Rosco]

Yep LD...801 Fusions work great on my Liquinator. Nice and snug with that Fusion carto lip.
Good luck pardner.

 

[Pokeygizmo]

Will a Fusion slide into the 510 Liquinator???

I've got Boges and Mega 808s as well.....

I mix all my stuff 80/20....That should play in a tank.....Right?????

All three cartos will work with the 510 Liquinator, El Dee, and your juice ratio will play very well in a tank.

 

[Ruppy]

No moves here are stupid. Uncalled for, unknown, uncontrolled, but not stupid. Especially from someone that put 24ml. nicotine in their

that's healing from surgery instead of eyedrops. LOL

That had to HURT! I remember all the drops from my eye surgery and it sucked with normal drops lol. The eyepatch for bed was far worse though.......

 

[5cardstud]

I got two 510 Liquinators on the way.....I bow too the experts....

Will a Fusion slide into the 510 Liquinator???

I've got Boges and Mega 808s as well.....

I mix all my stuff 80/20....That should play in a tank.....Right?????

Moo somehow or the other my BuzzPro juice well became full last evening...Juice from the finger too the eye was the end result....Nothing like the days of old when Cinnicide was vapable...I gotta try and come up with my own Cinnicide...Memories........Ahhhhhhhhhhh!!!!!!!!!!

A word of caution....You guys are slotting with cut off wheels....In my trade we use some that will eff you up!!! Those wheels abrade while cutting and mix with metal dust in the air...Either use more than adequate ventilation or wear a dust mask....Don't even think of doing this without eye protection....Those sparks stick too yer eyeballs...Ever stared at a drill as it prepares too drill those sparks free??? BTW we call them "Zizz Wheels" here in Dixie....and ours are air powered...I'll be debating chucking mine in the press and drilling...Depending on KW's reply too a smaller slot...The hole size is controllable if drilled...I wouldn't attempt drilling SS other than with a vice and press however....Damn my red light is dim and no blue light at all...

Fresh set in!! Hopefully my stuff will begin arriving tomorrow....I got 3 sets of 16340s coming...They'll be ready for Freddie when order 1963 arrives....I've abandoned the search for the lost PV...I'm hitting my Beta BP solely now...I guess most of you have been receiving your BPs here lately...Awesome Huh?? I weighed replacing the lost PV...It did have features I really liked but at the end of the day a lite weight long lasting PV won out...

Now if that tank gets me too Nirvana........

I had one of them abrasive discs, The 5 in. ones explode and one piece went passed my head and put a hole through a 1 in. thick piece of plywood. Another piece hit me in the stomach and put my lights out for a couple minutes. It only put a mark on me, that's still there, I think because I was close to it and it didn't get any speed. That's when I was young and I learned you don't put them on a die grinder that turns 200,000 RPMs. Duh.
I used the thicker stone grinder disk on my dremmel at an angle but a drill would work okay LD. As long as you can get both ends sealed on the carto you can use pretty much anything. LD I know you'll make a great tank my friend as you know whats going on with building things.

 

[Bovinia]

Dee I guess I live on the edge...I slotted my Fusion holding it on a piece of scrap wood with one hand and holding the dremel in the other hand. Maybe my cheapie dremel doesn't have the oomph it needs, I saw no sparks and it seemed to take forever to cut thru the carto. The carto is still working fine. This is the cheapo I got, but I paid a little less for it Rotary Tool Kit - 80 Piece Set We have a Harbor Freight store local.

 

[Pokeygizmo]

Livin' on the edge right there with you, Bov - a cutting board, free-handing the Dremel and off I go....

Fools rush in where angels fear to tread, LOL.

At least I had some glasses on, though.