Cartoz carts E2's etc. post it here
- Thread starter BuzzKill
- Start date
- th_trl_thread_readers 0
- Status
Me too Rosco. If the thief checked my available balance they will drop my card like a hot potato! LMAO
Sorry that happened Bo. They got me once but now they can try all they want because I'm fully protected and they can't spend a penny. It feels bad knowing someone is poking around in your personal stuff though.
LOL Rosco...you really needed to download songs from Itunes?! Just ask next time
Or go with Zune and for $14.99 a month you can download 10 songs to keep and as many songs as you want to use for the life of your subscription! Sorry for the shameless Zune plug, just not an iPod fan! At 99 cents a song I would have been out thousands of dollars for my collection!
I always wonder who -how -someone gets access.
Hope they catch that $ thief....
More often then not, it is from an on-line merchant not so secure database!
Sorry it happened to you Bov, it always sucks when it does. That is however one benefit to being in the "Going to CC Hell" club. When the theif does get our card there is not much they can do with it!
Hopefully El Dee will get back to use soon and let us know if that Ming worked with the tank... Stormy's Vapor is offering 15% off for the weekend and they sell the Ming!
The new liquinators came today and they are tight and slide free! They are tighter then the original ones I got. So all is good with the liquinator again!
Glad you finally have a "tight fit" Moo.
I've been using mine nonstop since last week, same carto and still perfect every time.
Yup, these new ones do fit very tight! I am thinking about switching out the new one with the one I have been using for the past month!
I've been using mine nonstop for a month as well and finally found a setup that has made me stop looking for another.
Buzz Pro + Liquinator + Fusion = HAPPY VAPOR!
Wharf, I'm still on the original carto, so only time will tell how long it will last.
Today is my 10th day on this carto and it stays constantly wet and it vapes like it did 10 days ago when I first "lit" it.
Only one package arrived today.....
It contained a black and brass Buzz Pro!!!!!!!!!!
104* and in Dixie it's not a dry heat!!! Index was around 115*!!! Sheesh!!!!!!!!!!
Maybe tomorrow will be tank day?????????
The Ming does have a rather "bulbous ....".......
If there is a recessed fit with the Fusion I'd still give it a 50/50 shot....
A slight trim reducing tank length should rectify any problems encountered...
I've grown quiet attached too this Ming.....
Hopefully I attach with the tank....If they don't melt in the mailbox.........
It contained a black and brass Buzz Pro!!!!!!!!!!
104* and in Dixie it's not a dry heat!!! Index was around 115*!!! Sheesh!!!!!!!!!!
Maybe tomorrow will be tank day?????????
The Ming does have a rather "bulbous ....".......
If there is a recessed fit with the Fusion I'd still give it a 50/50 shot....
A slight trim reducing tank length should rectify any problems encountered...
I've grown quiet attached too this Ming.....
Hopefully I attach with the tank....If they don't melt in the mailbox.........
As cool as these tanks are...the package you received today is way cooler!
I assume you mean to trim the actual tank polycarbonate a bit... Yes that would work, but make my tanks hold slightly less liquid. I would not tackle that task myself as I would be scared of messing up the tank and would be awfully upset with the husband if he did so! I think I'll wait for your package to arive and wait to see if the Ming fits with the fusion before I go messing up tank... and if it doesn't fit then the tank shall meet the blade!
That would really stink if your new tank melts before it gets to you! I hope it does not.
I'm off to bed! Night All!
I assume you mean to trim the actual tank polycarbonate a bit... Yes that would work, but make my tanks hold slightly less liquid. I would not tackle that task myself as I would be scared of messing up the tank and would be awfully upset with the husband if he did so! I think I'll wait for your package to arive and wait to see if the Ming fits with the fusion before I go messing up tank... and if it doesn't fit then the tank shall meet the blade!
That would really stink if your new tank melts before it gets to you! I hope it does not.
I'm off to bed! Night All!
Mega Fusions, Mega Fusions!!!
Oh wait...wrong supplier's forum LOL
Wharf you know you want a tank...go for it!! I love mine
Oh wait...wrong supplier's forum LOL
Wharf you know you want a tank...go for it!! I love mine
Yea I think I do Bov though I don't think I could use it during the day at work.
Here's my problem. I've been using the Fusions since they came back into stock in January and they lasted me 2-4 days. It's got to the point for last 2 months I'm only getting 4 to 12 hours. I've tried spinning, soaking, injecting ect... I've let them sit a half hour and i've let them sit 2 hours.
I thought it my be my juice and talked to Don to see if his ingredients had changed and they haven't. I just figured the juice doesn't work with the Fusions. Then Pokey gave me a couple of DC's and they worked. I also bought some LR Fusions and 2 of the 3 worked. So I don't think it's the juice.
So right now it doesn't seem to make sense if the cart is dying so fast. I would like one though. I 'm thinking about trying some boges or ??? IDK
Here's my problem. I've been using the Fusions since they came back into stock in January and they lasted me 2-4 days. It's got to the point for last 2 months I'm only getting 4 to 12 hours. I've tried spinning, soaking, injecting ect... I've let them sit a half hour and i've let them sit 2 hours.
I thought it my be my juice and talked to Don to see if his ingredients had changed and they haven't. I just figured the juice doesn't work with the Fusions. Then Pokey gave me a couple of DC's and they worked. I also bought some LR Fusions and 2 of the 3 worked. So I don't think it's the juice.
So right now it doesn't seem to make sense if the cart is dying so fast. I would like one though. I 'm thinking about trying some boges or ??? IDK
Bummer! Do they clog up or just quit working? The Fusions are thirsty little buggers and this tank is really making them great for me. The slotted boges that I got with my tank work good too, but I can understand your reluctance.
It seems to me if you are thinking about trying boges... you might as well try them with the tank as that is what is sold with the tank anyway, just my novice thoughts!
I have been really wanting to stop using the LR cartos based on all I have read here, but everytime I try something does not work right. Last night I got my new tank that I was going to use a backup or for different flavors or whatever.... So I grabbed one of the regular fusions my husband slotted for, put it in the extra tank, filled it and let it sit over night. This morning I put the tank with the regular fusion onto my BP, but it is not firing! But the other tank back on and it works fine. If this is a center post problem, can someone please explain to me (using very small and simple words) how to fix it!
I have been really wanting to stop using the LR cartos based on all I have read here, but everytime I try something does not work right. Last night I got my new tank that I was going to use a backup or for different flavors or whatever.... So I grabbed one of the regular fusions my husband slotted for, put it in the extra tank, filled it and let it sit over night. This morning I put the tank with the regular fusion onto my BP, but it is not firing! But the other tank back on and it works fine. If this is a center post problem, can someone please explain to me (using very small and simple words) how to fix it!
Dud liquinator, dud batteries, dud carto! This is quickly becoming the story of my life!
I stopped charging my tornado batteries shortly after the Buzz I borrowed from Wharf arrived and haven't had a need to charge them since the Buzz Pro's got here..., Guess when the hubby gets home I will try it on his BP and see if it works there.
I stopped charging my tornado batteries shortly after the Buzz I borrowed from Wharf arrived and haven't had a need to charge them since the Buzz Pro's got here..., Guess when the hubby gets home I will try it on his BP and see if it works there.
I rarely get a dud carto but it does happen. Are you using an adapter? If it doesn't work on your hubby's BP you can try prying the center pin on the bottom. I use my finger nail file if I need to do it. Just go around it while gently lifting it a bit and then see if it makes contact and fires.
And rats asses! I just discovered that the last 2 boxes of Fusions I got have the black labels on them Guess I'll be peeling and cleaning them.
And rats asses! I just discovered that the last 2 boxes of Fusions I got have the black labels on them
Guess I'll be peeling and cleaning them.
Last edited:
- Status
Similar threads
- Locked
