[CLOSED}

[Chowderhead1972]

Tom how is everything going? Have any good pictures to post?

I didn't take any pics of this run yet but I will tell you I'm gluing the magnets into all of them right now and have a fair amount of confidence they will all be shipping tomorrow... Well all but Distorto's second (in this run) and Kay's red. They will go on the next run. Btw if you are on the master list and want to move up let me know, I'm starting the next run tomorrow and hope to ship by Thursday. I'm off until next Saturday......

 

[Houndb]

Which master list? Thank God you have a few days off make sure you take some time to yourself and not work on mods and attys the full time you are off but I know you enjoy your hobby.

 

[Chowderhead1972]

Which master list? Thank God you have a few days off make sure you take some time to yourself and not work on mods and attys the full time you are off but I know you enjoy your hobby.

The doc list. Do you still need another one?

 

[Houndb]

No I have one and you will be shipping out two more for me in this round. I will hold off till the lil LBC 75 list comes because clear is yelling my name.

Dont forget to toss the predator in with the two LBC's.

I don't know where you got the carbon fiber panels from bit they are the nicest I have ever seen. Smooth and perfect. Next order of them though maybe you could get the squonk hole beveled a bit so it's not so sharp and just a bit wider.

 

[Houndb]

I have big hands and I already have made a gouge on the panel where my nail hits it from pressing the bottle.

 

[phanner]

Howdy!

If you wouldn't mind posting the current available attys and lists, I'd greatly appreciate it! Have my CC coming soon and need some new toys

Any chance there are ChiNardas floating around? I bought 2 authentic hobo 3.1 BF pins, one for my hobo, one for my Narda clone, and of course it doesn't work So sad. I think that the Narda is my best vape ever, combined with my new found love of squonking, I have to make it happen!

 

[phanner]

TheDigital99 made me aware that this isn't the place for BF clones

But I'd still like to know what's available in the authentics!

Please and thank you

 

[skillzizzo]

The terminal screws? I will have to find that evolve you sent me. Bear in mind however there isn't a flat surface in my house without 5 attys. I really need to have an atty yard sale.

Yes chowder I mean the terminal screws. I'm sure you have way more attys then one man needs for sure. I would throw some cotton in the evolve and play with it if you haven't is a pretty crazy build in it.

 

[Papa_Lazarou]

What's up PAPA L?

Hey, Ray. Busy as hell with work and the wife and I are renovating a property we just bought - busy, busy boy, me. The LBC is my constant companion.

 

[Chowderhead1972]

Chowder. Is there a better screw to be used for the evolve rda, or a better tool to use for the screws that come with it. The Allen key that comes with it is so loose in the screw hole doesn't work real well. I have been using this rda all day every day sence u bf them for me and my only problem is the screws thanks.

I would,suggest instead of new screw you invest in a better driver a Hudy 1.5mm hex driver would make you a happy camper. The grubs in question look to be m3 X 6mm flat points. Being flat points they will have a tendency to back out under heating and cooling more so than other options but the others are much more likely to becom coil cutters. If you don't love the Hudy driver I will buy it from you.

 

[phanner]

Is there a BF pin available for the Evolve? I have one of those that I've never even built that I'd love to add to my BF collection!

 

[Chowderhead1972]

Tom how is everything going? Have any good pictures to post?

Might not make tomorrow. These are ready to ship now; just finished the inlays and just realized I only have 10 usb cables (50 more arriving Sunday). It almost 5am I started back on these at 10am yesterday. I'm hammered.

 

[Chowderhead1972]

Is there a BF pin available for the Evolve? I have one of those that I've never even built that I'd love to add to my BF collection!

No,but you can send it in. You will never see a bigger squonk hole. The stock pin in the evolve is m3.5 copper; good luck finding an m3.5 in stainless. I bore out to 4mm and make a pin. The squonk hole is 2.27mm.

 

[NatGasMan]

Might not make tomorrow. These are ready to ship now; just finished the inlays and just realized I only have 10 usb cables (50 more arriving Sunday). It almost 5am I started back on these at 10am yesterday. I'm hammered.

You gotta be quick to have all the screens lit at the same time. LOL!

 

[Hank F. Spankman]

Tom, have you seen the Advken Ziggs yet? Looks like an optimal (converted)BF atty for a very reasonable price

 

[Chowderhead1972]

Tom, have you seen the Advken Ziggs yet? Looks like an optimal (converted)BF atty for a very reasonable price

Never heard of it.... GOOGLING

 

[Chowderhead1972]

What do you think class?

Advken Ziggs

 

[Hank F. Spankman]

What do you think class?

View attachment 576331 Advken Ziggs

It looks like a flavor machine

 

[Train2]

This is a weird image.
One of those visual things where sometimes it looks like a button popping out instead of a hole in the top...
But it looks like a decent internal dome, right?

Anyway - it SAYS "510 driptip". But I'd be curious if you can pop in your own - in case the included tip isn't what you like...

 

[beez0527]

What do you think class?

View attachment 576331 Advken Ziggs

It does look interesting.

Sent from my SM-P607T using Tapatalk