[CLOSED}

[havok333]

We haven't done a list in a while...
Who would be up for an LBC in glowing yellow over super chrome (like on the swing arm on the pictured motorcycle?

1. Chowderhead1972
2. inspects
3. havok333

 

[havok333]

Would prefer brighter yellow but I like this slightly neon greenish yellow as well.

Sent from my XT1049 using Tapatalk

 

[beez0527]

Looking to pick up an external lipo charger is there a difference or are they pretty much the same.

Sent from my SM-P607T using Tapatalk

 

[phanner]

It looks like a flavor machine

This

 

[Chowderhead1972]

Would prefer brighter yellow but I like this slightly neon greenish yellow as well.

Sent from my XT1049 using Tapatalk

If you want regular bright yellow just wait, I want one of them also. That will probably be the third round. The second will probably be lambo pearl orange.
Will edit for example.

Eta:


Do you see a recurring theme here? I like bright.... Earth tones can suck it.....

 

[Chowderhead1972]

Would prefer brighter yellow but I like this slightly neon greenish yellow as well.

Sent from my XT1049 using Tapatalk

Btw your repairs are done.... I was able to save both 510s..... Everything else in the current path was a total loss. They also will be shipping Monday.

 

[NatGasMan]

If you want regular bright yellow just wait, I want one of them also. That will probably be the third round. The second will probably be lambo pearl orange.
Will edit for example.

Eta:


Do you see a recurring theme here? I like bright.... Earth tones can suck it.....

1. NatGasMan
2.
3.
4.

 

[skillzizzo]

I forsee a bunch of Hudy drivers in your future. Bonus: the shaft on the 1.5mm is exactly 3mm and hard coated with some really slippery coating, works great for coil wrapping. That's part of the reason I use 3mm coils in everything. That same 1.5mm will work in most of your 3mm based 22mm+ attys as well. I have actually gotten to the point where I will rethread posts to 3mm just to keep everything uniform.

I keep hearing all of you talk about these Hudy drivers so we will c if they are worth what they cost. Is a good comparison to start with I have put alot of builds in this atty. If the Hudy works like butter then will be no looking back. I have been fighting with this attys screws for months. I have many things for coil building 99.9 percent of the time I grab the build rods from avid vapor I have. I mainly used the marquis ones until I sold it like those rods more then any thing ever. And yes 3mm 24 or 26 gauge parralels is what I mainly run in any atty for a mech. When the tmod 200 shows up, and the goon from you shows up I can make some crazy builds I like to do once again. First build going in there is going to be micro twisted claptons 30 gauge clapton ed in 38 gauge then 2 twisted together and vape hard. I build some a while back and they did not fit in any thing I owned with out them shorting out. Could of mad them 2mm I'd but then they would suck. Highly anticapting the goon 200 combo.

 

[MFToms59]

If you want regular bright yellow just wait, I want one of them also. That will probably be the third round. The second will probably be lambo pearl orange.
Will edit for example.

Eta:


Do you see a recurring theme here? I like bright.... Earth tones can suck it.....

1. NatGasMan
2. MFToms59
3.
4.

 

[Chowderhead1972]

Looking to pick up an external lipo charger is there a difference or are they pretty much the same.

Sent from my SM-P607T using Tapatalk

The one I use for pre-charging all the LBC batteries is from Hobby King. It charges at 3a and connects via the jst connector only. Works well and it was only $25.

 

[havok333]

If you want regular bright yellow just wait, I want one of them also. That will probably be the third round. The second will probably be lambo pearl orange.
Will edit for example.

Eta:


Do you see a recurring theme here? I like bright.... Earth tones can suck it.....

Yes, that orange looks absolutely perfect! Okay, I'll let the slightly neon green slide and hit on the regular yellow and this badass orange. They could even be DNA75 if the timing works out, since I was planning to get at least a couple of those as well.

 

[distortoblotto]

New
If you want regular bright yellow just wait, I want one of them also. That will probably be the third round. The second will probably be lambo pearl orange.
Will edit for example.

Eta:


Do you see a recurring theme here? I like bright.... Earth tones can suck it.....

1. NatGasMan
2. MFToms59
3.distortoblotto
4.

 

[havok333]

If you want regular bright yellow just wait, I want one of them also. That will probably be the third round. The second will probably be lambo pearl orange.
Will edit for example.

Eta:


Do you see a recurring theme here? I like bright.... Earth tones can suck it.....

1. NatGasMan
2. MFToms59
3. distortoblotto
4. havok333
5.

 

[jazzvaper]

The one I use for pre-charging all the LBC batteries is from Hobby King. It charges at 3a and connects via the jst connector only. Works well and it was only $25.

A link please?

I have the SkyRC B6AC which is more than okay. But charging through the JST would be great.

Thanx!!

 

[MFToms59]

A link please?

I have the SkyRC B6AC which is more than okay. But charging through the JST would be great.

Thanx!!

Turnigy P403 LiPoly / LiFe AC/DC Battery Charger

 

[Houndb]

Ok I have a few things I want to try and have a couple of questions for you guys.

Need to replace a 510. What do you guys recommend?

Epoxy for holding the 510 in. What do you recommend?

What size drill and tap do I use if I want to thread it in?

When I solder the connections what kind of solder do you guys recommend.

I really appreciate everyone's opinions in this thread and Tom if it's to much of a high jack I will delete

 

[Tagi]

"Houndb, post: 18153945, member: 217492"]Ok I have a few things I want to try and have a couple of questions for you guys.

Need to replace a 510. What do you guys recommend? For BF? Definatly the new Varitube BF

Epoxy for holding the 510 in. What do you recommend? I have always used the retaining nut. But the standard 2 ton epoxy maybe.

What size drill and tap do I use if I want to thread it in? I use a bigish regular bit to get a hole , then use a setp bit to widen it. no threading. Retaining nut keeps it secure. Get it TIGHT and the 510 will not spin.

When I solder the connections what kind of solder do you guys recommend. Sn63/Pb37 works pretty good. Has lead in it. The leadfree stuff is hard to work with. And the solder connections are not in contact with juice or around air intakes.

I really appreciate everyone's opinions in this thread and Tom if it's to much of a high jack I will delete

 

[Chowderhead1972]

A link please?

I have the SkyRC B6AC which is more than okay. But charging through the JST would be great.

Thanx!!

Turnigy P403 LiPoly / LiFe AC/DC Battery Charger

 

[Chowderhead1972]

Ok I have a few things I want to try and have a couple of questions for you guys.

Need to replace a 510. What do you guys recommend?

Epoxy for holding the 510 in. What do you recommend?

What size drill and tap do I use if I want to thread it in?

When I solder the connections what kind of solder do you guys recommend.

I really appreciate everyone's opinions in this thread and Tom if it's to much of a high jack I will delete

If you want to send it in I'll do it.

 

[Nautilusfan]

Turnigy P403 LiPoly / LiFe AC/DC Battery Charger

Yep that's the one I've got. Great charger I'm sure! Mines still in the box....wasn't needed after the external jst charging port was eliminated from the LBC. I'm sure I'll find a good use for it at some point.