Colors just not green or purple. Specify in comments.
[CLOSED}
- Thread starter Chowderhead1972
- Start date
- th_trl_thread_readers 0
- Status
Found out what you can and can not fit in the evolve today. I wasted lots of wire and lots of time making alot of crazy builds that we'll no way in this world would fit. But here is my version of the biggest build that fits in it worth vapong. Is a dual parralell build each side is 26 gauge kanthal in 38 gauge outer nichrome claptons, parralelled, chucks the vapor on a tmod, and flavor is right there. I usualy run 26 gauge parralells in this rda same 3mm id for building is on a dna 40 in the pics is mt build stand lol
Attachments
All of the first round of LBCs have shipped.
95835 9505511002816155312651
48165 9505511002816155312668
95835 9505511002816155312651
48165 9505511002816155312668
LBC list #2 21-30
Bentos
Yepster
Yinsen
Kentastic
Rudedog
Rick Cain
Tamer El-Meehy
Tagi
Laurie9300
Drucco99
Back ups:
Feedog
DennyD
Havok
If you are paying by anything other than PayPal it's time to get those checks in the mail or Transferwise, or PopMoney going. PayPal invoices will be out Monday.
Just remember all payments via non PayPal are $425 domestic or $440 Canada or $450 for the rest of the world.
PayPal is $450 domestic $465 Canada or $475 for the rest of the world.
Bentos
Yepster
Yinsen
Kentastic
Rudedog
Rick Cain
Tamer El-Meehy
Tagi
Laurie9300
Drucco99
Back ups:
Feedog
DennyD
Havok
If you are paying by anything other than PayPal it's time to get those checks in the mail or Transferwise, or PopMoney going. PayPal invoices will be out Monday.
Just remember all payments via non PayPal are $425 domestic or $440 Canada or $450 for the rest of the world.
PayPal is $450 domestic $465 Canada or $475 for the rest of the world.
Let's do a quick 24hr quick old school list for Makers and Petris. Specify colors
Maker:
THE MAKER RSA by CATFISH
(Doc currently closed, but I will have it opened ASAP).
1. Chowderhead72 Blue
2. havok333 Blue
3. Nautilusfan Blue
4. TheDigital99 Blue
Petri
Black Petri version v2 W Drip tip!! Bottom Feed RSA by CATFISH
1. Chowderhead72 black
2. ModernDayDrifter Black
3. Inspects black (paid)
4. Yinsen (red)
5. Beez0527 (blue)
Sent from my SM-P607T using Tapatalk
Maker:
THE MAKER RSA by CATFISH
(Doc currently closed, but I will have it opened ASAP).
1. Chowderhead72 Blue
2. havok333 Blue
3. Nautilusfan Blue
4. TheDigital99 Blue
Petri
Black Petri version v2 W Drip tip!! Bottom Feed RSA by CATFISH
1. Chowderhead72 black
2. ModernDayDrifter Black
3. Inspects black (paid)
4. Yinsen (red)
5. Beez0527 (blue)
Sent from my SM-P607T using Tapatalk
Still torn between Ti and natural/clear any chance of a comparison pic with carbon?
Last edited:
LBC list #2 21-30
Bentos
Yepster
Yinsen
Kentastic - (Paypal)
Rudedog
Rick Cain
Tamer El-Meehy
Tagi
Laurie9300
Drucco99
Back ups:
Feedog
DennyD
Havok
If you are paying by anything other than PayPal it's time to get those checks in the mail or Transferwise, or PopMoney going. PayPal invoices will be out Monday.
Just remember all payments via non PayPal are $425 domestic or $440 Canada or $450 for the rest of the world.
PayPal is $450 domestic $465 Canada or $475 for the rest of the world.
Bentos
Yepster
Yinsen
Kentastic - (Paypal)
Rudedog
Rick Cain
Tamer El-Meehy
Tagi
Laurie9300
Drucco99
Back ups:
Feedog
DennyD
Havok
If you are paying by anything other than PayPal it's time to get those checks in the mail or Transferwise, or PopMoney going. PayPal invoices will be out Monday.
Just remember all payments via non PayPal are $425 domestic or $440 Canada or $450 for the rest of the world.
PayPal is $450 domestic $465 Canada or $475 for the rest of the world.
LBC list #2 21-30
Bentos
Yepster
Yinsen
Kentastic - (Paypal)
Rudedog
Rick Cain
Tamer El-Meehy
Tagi
Laurie9300 - (Transferwise)
Drucco99
Back ups:
Feedog
DennyD
Havok
If you are paying by anything other than PayPal it's time to get those checks in the mail or Transferwise, or PopMoney going. PayPal invoices will be out Monday.
Just remember all payments via non PayPal are $425 domestic or $440 Canada or $450 for the rest of the world.
PayPal is $450 domestic $465 Canada or $475 for the rest of the world.
Bentos
Yepster
Yinsen
Kentastic - (Paypal)
Rudedog
Rick Cain
Tamer El-Meehy
Tagi
Laurie9300 - (Transferwise)
Drucco99
Back ups:
Feedog
DennyD
Havok
If you are paying by anything other than PayPal it's time to get those checks in the mail or Transferwise, or PopMoney going. PayPal invoices will be out Monday.
Just remember all payments via non PayPal are $425 domestic or $440 Canada or $450 for the rest of the world.
PayPal is $450 domestic $465 Canada or $475 for the rest of the world.
LBC list #2 21-30
Bentos
Yepster
Yinsen
Kentastic - (Paypal)
Rudedog
Rick Cain
Tamer El-Meehy
Tagi - (Paypal)
Laurie9300 - (Transferwise)
Drucco99
Back ups:
Feedog
DennyD
Havok
If you are paying by anything other than PayPal it's time to get those checks in the mail or Transferwise, or PopMoney going. PayPal invoices will be out Monday.
Just remember all payments via non PayPal are $425 domestic or $440 Canada or $450 for the rest of the world.
PayPal is $450 domestic $465 Canada or $475 for the rest of the world.
Bentos
Yepster
Yinsen
Kentastic - (Paypal)
Rudedog
Rick Cain
Tamer El-Meehy
Tagi - (Paypal)
Laurie9300 - (Transferwise)
Drucco99
Back ups:
Feedog
DennyD
Havok
If you are paying by anything other than PayPal it's time to get those checks in the mail or Transferwise, or PopMoney going. PayPal invoices will be out Monday.
Just remember all payments via non PayPal are $425 domestic or $440 Canada or $450 for the rest of the world.
PayPal is $450 domestic $465 Canada or $475 for the rest of the world.
I haven't built a clear anno yet, but I will be building one for myself very soon that will shown off heavily.
Petri2s on the way. My biggest DotMod order to date. 40 Petris....
Note to all new LBC owners:
Many of you will be receiving your LBCs today or tomorrow; the device in and of itself is very straight forward. Please see evolv's website for directions to the board itself. Your device has been programmed to highlight the temp control possibilities of of,the DNA200. Your profiles are:
1. SS 316l
2. SS 316l
3. NiFe30
4. NiFe30
5. Titanium
6. Titanium
7. Nickel
8. Nickel
When a regular kanthal coil is sensed by the dna200 it reverts to normal power mode automatically and is limited at 150watts for non-temp control only (up from the stock 100w)
Be careful! The LBC has enough power to hurt you, please know,this going in. The point of the dna200 as well as the LBC isn't so much designed to be a 200w device because honestly it's designed to be a device that keeps up with you no matter what crazy power need you might have while being integrated into a no compromise bottom fed mod. I can say this enough; just because it will do 200watts doesn't mean it's some type of competition. Vape for your pleasure, vape for your comfort, and most of all a little common sense. If it hurts, stop; no one is impressed with how much power you torture yourself with. There are a lot of people in the bottom feeding community that just don't get the upshot of the dna200 in bottomfed vaping and that is purely their prerogative. Please; I beg you: don't become a statistic and fodder for the low power fanboys and their narrow minded diatribe. How's that for a warning label?
Now that we got through that....
All of the LBCs shipped to date have the 510 connection set at 4.5mm depth. This will cover most any atty that I have sold. I spec attys at 4.5mm- a max of 4.8mm. .3mm is a tiny gap. I would suggest living with it; but if you must adjust.....
Insert your atty and bottom it out on the 510 if the 510 is too deep or on the center pin is too short (check atomizer situation) loosen the 510 nut (with a 7mm 12 point combo wrench with the closed end) and loosen (do not remove)the nut. Once the nut is loose adjust the center pin up or down as need be.
********************************************************************************
DO NOT, I REPEAT DO NOT! Just go to town cranking on the 2mm Allen wrench top of the pin without loosening the nut, you will rip the copper buss connector off the board and at that point the board will have to be replaced. ***+++++
*********************************************************************************
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
You have been warned.
Follow that 1 rule and the LBC will last a very long time.
Why? you migh ask... Temp control requires very accurate measurements of the atty resistance in real time. The springs required for an automatic 510 when submerged in juice and then force fed the amounts of current that the LBC is capable of would become a failure point, I don't like failure points... I like rock solid contact and that exactly what the LBC delivers but will require a little work when changing attys of different lengths.
For easy adjustments I would suggest purchasing or running out to the garage and grabbing a 7mm combination wrench 12 point if you have a choice, either 6 pint or 12 point will work but 12 point works better. Your LBC already comes with a m2 Allen wrench, an extra bottle, and a heavy duty usb cord for charging. Your LBCs wre all shipped with a full charge so they are ready to go out of the box. The board is updated to the most recent firmware 2/23/16.
Many of you will be receiving your LBCs today or tomorrow; the device in and of itself is very straight forward. Please see evolv's website for directions to the board itself. Your device has been programmed to highlight the temp control possibilities of of,the DNA200. Your profiles are:
1. SS 316l
2. SS 316l
3. NiFe30
4. NiFe30
5. Titanium
6. Titanium
7. Nickel
8. Nickel
When a regular kanthal coil is sensed by the dna200 it reverts to normal power mode automatically and is limited at 150watts for non-temp control only (up from the stock 100w)
Be careful! The LBC has enough power to hurt you, please know,this going in. The point of the dna200 as well as the LBC isn't so much designed to be a 200w device because honestly it's designed to be a device that keeps up with you no matter what crazy power need you might have while being integrated into a no compromise bottom fed mod. I can say this enough; just because it will do 200watts doesn't mean it's some type of competition. Vape for your pleasure, vape for your comfort, and most of all a little common sense. If it hurts, stop; no one is impressed with how much power you torture yourself with. There are a lot of people in the bottom feeding community that just don't get the upshot of the dna200 in bottomfed vaping and that is purely their prerogative. Please; I beg you: don't become a statistic and fodder for the low power fanboys and their narrow minded diatribe. How's that for a warning label?
Now that we got through that....
All of the LBCs shipped to date have the 510 connection set at 4.5mm depth. This will cover most any atty that I have sold. I spec attys at 4.5mm- a max of 4.8mm. .3mm is a tiny gap. I would suggest living with it; but if you must adjust.....
Insert your atty and bottom it out on the 510 if the 510 is too deep or on the center pin is too short (check atomizer situation) loosen the 510 nut (with a 7mm 12 point combo wrench with the closed end) and loosen (do not remove)the nut. Once the nut is loose adjust the center pin up or down as need be.
********************************************************************************
DO NOT, I REPEAT DO NOT! Just go to town cranking on the 2mm Allen wrench top of the pin without loosening the nut, you will rip the copper buss connector off the board and at that point the board will have to be replaced. ***+++++
*********************************************************************************
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
You have been warned.
Follow that 1 rule and the LBC will last a very long time.
Why? you migh ask... Temp control requires very accurate measurements of the atty resistance in real time. The springs required for an automatic 510 when submerged in juice and then force fed the amounts of current that the LBC is capable of would become a failure point, I don't like failure points... I like rock solid contact and that exactly what the LBC delivers but will require a little work when changing attys of different lengths.
For easy adjustments I would suggest purchasing or running out to the garage and grabbing a 7mm combination wrench 12 point if you have a choice, either 6 pint or 12 point will work but 12 point works better. Your LBC already comes with a m2 Allen wrench, an extra bottle, and a heavy duty usb cord for charging. Your LBCs wre all shipped with a full charge so they are ready to go out of the box. The board is updated to the most recent firmware 2/23/16.
Should we confirm our color choices?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
LBC list #2 21-30
Bentos
Yepster
Yinsen
Kentastic - (Paypal)
Rudedog
Rick Cain
Tamer El-Meehy - (Paypal - Ti)
Tagi - (Paypal)
Laurie9300 - (Transferwise)
Drucco99
Back ups:
Feedog
DennyD
Havok
If you are paying by anything other than PayPal it's time to get those checks in the mail or Transferwise, or PopMoney going. PayPal invoices will be out Monday.
Just remember all payments via non PayPal are $425 domestic or $440 Canada or $450 for the rest of the world.
PayPal is $450 domestic $465 Canada or $475 for the rest of the world.
Sent from my iPhone using Tapatalk
Bentos
Yepster
Yinsen
Kentastic - (Paypal)
Rudedog
Rick Cain
Tamer El-Meehy - (Paypal - Ti)
Tagi - (Paypal)
Laurie9300 - (Transferwise)
Drucco99
Back ups:
Feedog
DennyD
Havok
If you are paying by anything other than PayPal it's time to get those checks in the mail or Transferwise, or PopMoney going. PayPal invoices will be out Monday.
Just remember all payments via non PayPal are $425 domestic or $440 Canada or $450 for the rest of the world.
PayPal is $450 domestic $465 Canada or $475 for the rest of the world.
Sent from my iPhone using Tapatalk
- Status
Similar threads
